ITU-T Q 4003 3-2016 Communication HOLD using IP multimedia core network subsystem Conformance testing C Part 3 User side Test suite structure and test purposes (Study Group 11)《使用I.pdf

1、 I n t e r n a t i o n a l T e l e c o m m u n i c a t i o n U n i o n ITU-T Q.4003.3 TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (02/2016) SERIES Q: SWITCHING AND SIGNALLING Testing specifications Testing specifications for SIP-IMS Communication HOLD using IP multimedia core network subsystem;

2、Conformance testing Part 3: User side; Test suite structure and test purposes Recommendation ITU-T Q.4003.3 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORMATI

3、ON FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799 Q3

4、 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799 SPECIFICATIONS OF SIGNALLING RE

5、LATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3899 TESTING SPECIFICATIONS Q.3900Q.4099 Testing specifications for next generation networks Q.3900Q.3999 Testing specifications for SIP-IMS Q.4000Q.4039

6、 Testing specifications for Cloud computing Q.4040Q.4059 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.4003.3 (02/2016) i Recommendation ITU-T Q.4003.3 Communication HOLD using IP multimedia core network subsystem; Conformance testing Part 3: User side; Test su

7、ite structure and test purposes Summary Recommendation ITU-T Q. 4003.3 v.1 (2016) is part 3 of the testing specifications for HOLD service implemented on IP multimedia subsystem (IMS) basis on the user side. The Recommendation specifies the test suite structure and test purposes (TSS Conformance tes

8、ting Part 3: User side, Test suite structure and test purposes 1 Scope This Recommendation provides the test suite structure (TSS) and test purposes (TP) for the test specifications for the communication HOLD on the user side using IP multimedia (IM) core network (CN) subsystem as specified in ITU-T

9、 Q.3619 v.1 and IETF RFC 3264 in compliance with the relevant requirements and in accordance with the relevant guidance given in ITU-T X.296. This Recommendation can be used for compliance testing against ITU-T Q.3619 v.1 “Communication HOLD using IP multimedia core network subsystem Protocol specif

10、ication“ on the user side. The version number, v.1, indicates that this is version one of Recommendation ITU-T Q.4003.3, and that it relates to Release 10 of the relevant 3GPP/ETSI standard. 2 References The following ITU-T Recommendations and other references contain provisions which, through refer

11、ence in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most

12、recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T Q.3619 v.1 Re

13、commendation ITU-T Q.3619 v.1 (2016), Communication HOLD using IP multimedia core network subsystem Protocol specification. ITU-T Q.4003.1 v.1 Recommendation ITU-T Q.4003.1 v.1 (2016), Communication HOLD using IP multimedia core network subsystem; Conformance Testing Part 1: Network side and user si

14、de; Protocol implementation conformance statement. ITU-T X.290 Recommendation ITU-T X.290 (1995), OSI conformance testing methodology and framework for protocol Recommendations for ITU-T applications General concepts. ITU-T X.296 Recommendation ITU-T X.296 (1995), OSI conformance testing methodology

15、 and framework for protocol Recommendations for ITU-T applications Implementation conformance statements. IETF RFC 3264 IETF RFC 3264 (2002), An Offer/Answer Model with the Session Description Protocol (SDP). 3 Definitions 3.1 Terms defined elsewhere This Recommendation uses the following terms defi

16、ned elsewhere: 3.1.1 abstract test suite (ATS): Refer to ITU-T X.290. 3.1.2 implementation under test (IUT): Refer to ITU-T X.290. 2 Rec. ITU-T Q.4003.3 (02/2016) 3.1.3 PICS proforma: Refer to ITU-T X.290. 3.1.4 point of control and observation: Refer to ITU-T X.290. 3.1.5 protocol implementation co

17、nformance statement (PICS): Refer to ITU-T X.290. 3.1.6 system under test (SUT): Refer to ITU-T X.290. 3.1.7 test purpose (TP): Refer to ITU-T X.290. 3.2 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: For the purposes of this Recommendation, the abbrevi

18、ations given in ITU-T Q.3619 v.1 and the following apply: IUT Implementation Under Test SUT System Under Test TSS Test Suite Structure UE User Equipment 4 Test Suite Structure (TSS) ServedUser WithUPDATE CH_U01_xxx WithoutUPDATE CH_U02_xxx Figure 1 Test suite structure 4.1 Configuration The scope of

19、 this Recommendation is to test the signalling and procedural aspects of the stage 3 requirements as described in ITU-T Q.3619 v.1. Stage 3 describes the requirements for several network entities and also the requirements for terminal devices. Therefore several interfaces (reference points) are addr

20、essed to satisfy the test of the different entities. Therefore to test the appropriate entities the configurations below are applicable. 4.1.2 Testing of the UE There are special clauses in the protocol standard describing the procedures that apply at the originating and terminating user equipment (

21、UE). Therefore the test configuration below has been chosen. Figure 2 Applicable configuration to test UE functionalities Rec. ITU-T Q.4003.3 (02/2016) 3 5 Test purposes (TP) 5.1 Introduction For each test requirement a test purpose (TP) is defined. 5.1.1 TP naming convention Test purposes (TPs) are

22、 numbered, starting at 001, within each group. Groups are organized according to the test suite structure (TSS). Additional references are added to identify the actual test suite and whether it applies to the network or the user (see Table 1). Table 1 TP identifier naming convention scheme Identifie

23、r: _ = supplementary service: e.g. “CH“ = type of IUT: U User N Network = group 2 digit field representing group reference according to TSS = sequential number (001-999) 5.1.2 Test strategy As the base standard ITU-T Q.3619 v.1 contains no explicit requirements for testing, the TPs were generated as

24、 a result of an analysis of the base standard and the protocol implementation conformance statements (PICS) in ITU-T Q.4003.1. 5.2 User TPs for HOLD All PICS items referred to in this clause are as specified in ITU-T Q.4003.1 v.1 unless indicated otherwise by another numbered reference. 5.2.1 Served

25、 user 5.2.1.1 Communication Hold with support for UPDATE TSS ServedUser/WithUPDATE TP CH_U01_001 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream w

26、as previously set to sendrecv. Ensure that the IUT to hold an individual media stream of the communication session, sends an UPDATE request containing a SDP body with an attribute line indicating a= sendonly. Precondition: A session was established between the served user and a remote user according

27、 to the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equipment Test Equipment Establish a confirmed session User invokes the HOLD service UPDATE(sendonly) 200 OK (recvonly) Apply post test routine 4 Rec. ITU-T Q.4003.3 (02/2016) TSS

28、 ServedUser/WithUPDATE TP CH_U01_002 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendrecv. Ensure that the IUT responds

29、to the hold request of an individual media stream of the communication session from the remote party, sends a 200 OK INVITE/UPDATE response containing a SDP body with an attribute line indicating a=recvonly. Precondition: A session was established between the served user and a remote user according

30、to the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equipment Test Equipment Establish a confirmed session CASE A UPDATE(sendonly) 200 OK (recvonly) CASE B INVITE(sendonly) 200 OK (recvonly) ACK Apply post test routine TSS ServedUse

31、r/WithUPDATE TP CH_U01_003 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to recvonly. Ensure that the IUT to hold an individu

32、al media stream of the communication session, sends an UPDATE request containing a SDP body with an attribute line indicating a=inactive. Precondition: A session was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to re

33、cvonly One individual media stream Comments: User Equipment Test Equipment Establish a confirmed session CASE A UPDATE(sendonly) 200 OK (recvonly) CASE B INVITE(sendonly) 200 OK (recvonly) ACK User invokes the HOLD service UPDATE(inactive) 200 OK (inactive) Apply post test routine TSS ServedUser/Wit

34、hUPDATE TP CH_U01_004 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session resume. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendonly. Ensure that the IUT to resume an individua

35、l media stream of the communication session, sends an UPDATE request containing a SDP body with an attribute line indicating a=sendrecv or without attribute line. Rec. ITU-T Q.4003.3 (02/2016) 5 Precondition: A session was established between the served user and a remote user according to the basic

36、Call procedures The media stream was previously set to sendonly One individual media stream Comments: User Equipment Test Equipment Establish a confirmed session User invokes the HOLD service UPDATE(sendonly) 200 OK (recvonly) User resumes the session UPDATE(sendrecv or absent) 200 OK (sendrecv or a

37、bsent) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_005 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session resume. UPDATE method is used. Individual media streams are affected. The media stream was previously set to i

38、nactive. Ensure that the IUT to resume an individual media stream of the communication session, sends an UPDATE request containing a SDP body with an attribute line indicating a=recvonly. Precondition: A session was established between the served user and a remote user according to the basic Call pr

39、ocedures The media stream was previously set to inactive One individual media stream Comments: User Equipment Test Equipment Establish a confirmed session CASE A UPDATE(sendonly) 200 OK (recvonly) CASE B INVITE(sendonly) 200 OK (recvonly) ACK User invokes the HOLD service UPDATE(inactive) 200 OK (in

40、active) User resumes the media session UPDATE(recvonly) 200 OK (sendonly) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_006 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session hold. UPDATE method is used. Individual med

41、ia stream is affected. The media stream was previously set to inactive. Ensure that the IUT to resume an individual media stream of the communication session, sends an UPDATE request containing a SDP body with an attribute line indicating a=sendonly. Precondition: A session was established between t

42、he served user and a remote user according to the basic Call procedures The media stream was previously set to inactive One individual media stream 6 Rec. ITU-T Q.4003.3 (02/2016) Comments: User Equipment Test Equipment Establish a confirmed session User invokes the HOLD service UPDATE(sendonly) 200

43、 OK (recvonly) CASE A UPDATE(inactive) 200 OK (inactive) CASE B INVITE(inactive) 200 OK (inactive) ACK User resumes the media session UPDATE(sendonly) 200 OK (recvonly) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_007 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection express

44、ion PICS 5.1/1 AND PICS 5.2/1 Test purpose: Session hold. UPDATE method is used. Individual media stream is affected. The media stream was previously set to sendrecv. Ensure that the IUT to hold an individual media stream of an early dialogue, sends an UPDATE request containing a SDP body with an at

45、tribute line indicating a= sendonly. Precondition: An early dialogue was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equipment Test Equipment Establish an early

46、 dialogue User invokes the HOLD service UPDATE(sendonly) 200 OK (recvonly) Apply post test routine TSS ServedUser/WithUPDATE TP CH_U01_008 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/1 Test purpose: Session hold. UPDATE method is used. Individual me

47、dia stream is affected. The media stream was previously set to sendrecv. Ensure that the IUT responds to the hold request of an individual media stream from the remote party of an early dialogue, sends a 200 OK UPDATE response containing a SDP body with an attribute line indicating a=recvonly. Preco

48、ndition: An early dialogue was established between the served user and a remote user according to the basic Call procedures The media stream was previously set to sendrecv One individual media stream Comments: User Equipment Test Equipment Establish an early dialogue UPDATE(sendonly) 200 OK (recvonl

49、y) Apply post test routine Rec. ITU-T Q.4003.3 (02/2016) 7 TSS ServedUser/WithUPDATE TP CH_U01_009 HOLD reference Clause 4.5.2.1 of ITU-T Q.3619 v.1 Selection expression PICS 5.1/1 AND PICS 5.2/2 Test purpose: Session hold. UPDATE method is used. All media streams are affected. The media streams were previou