ITU-T Q 763 AMD 4-2006 Signalling System No 7 C ISDN User Part formats and codes Amendment 4 Support for the International Emergency Preference Scheme (Study Group 11)《NO 7信令系统-ISD.pdf

1、 International Telecommunication Union ITU-T Q.763TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Amendment 4(01/2006) SERIES Q: SWITCHING AND SIGNALLING Specifications of Signalling System No. 7 ISDN user partSignalling System No. 7 ISDN User Part formats and codes Amendment 4: Support for the Inte

2、rnational Emergency Preference Scheme ITU-T Recommendation Q.763 (1999) Amendment 4 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN

3、 THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Q.700Q.799 General Q.700 Message tran

4、sfer part (MTP) Q.701Q.710 Signalling connection control part (SCCP) Q.711Q.719 Telephone user part (TUP) Q.720Q.729 ISDN supplementary services Q.730Q.739 Data user part Q.740Q.749 Signalling System No. 7 management Q.750Q.759 ISDN user part Q.760Q.769 Transaction capabilities application part Q.77

5、0Q.779 Test specification Q.780Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.170

6、0Q.1799 SPECIFICATIONS OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 For further details, please refer to the list of ITU-T Recommendations. ITU-T Rec. Q.763 (1999)/Amd.4 (01/2006) i ITU-T Recommendation Q.763 Signalling System No. 7 ISDN Us

7、er Part formats and codes Amendment 4 Support for the International Emergency Preference Scheme Summary This amendment was produced to meet the need for the implementation of the International Emergency Preference Scheme (IEPS) for disaster recovery operations as specified in ITU-T Rec. E.106. This

8、amendment contains the modifications to ITU-T Rec. Q.763 (1999) in order to accommodate these needs. It should be read in conjunction with Amendment 3 to ITU-T Rec. Q.761, Amendment 3 to ITU-T Rec. Q.762, and Amendment 4 to ITU-T Rec. Q.764. This amendment incorporates Amendment 2 to ITU-T Rec. Q.76

9、3 and provides enhancements. Source Amendment 4 to ITU-T Recommendation Q.763 (1999) was approved on 27 January 2006 by ITU-T Study Group 11 (2005-2008) under the WTSA Resolution 1 procedure. ii ITU-T Rec. Q.763 (1999)/Amd.4 (01/2006) FOREWORD The International Telecommunication Union (ITU) is the U

10、nited Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing tele

11、communications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the

12、procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a

13、telecommunication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure e.g. interoperability or applicability) and compliance with the Recommendation is achieved when all of

14、 these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS

15、 ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU m

16、embers or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may

17、 not represent the latest information and are therefore strongly urged to consult the TSB patent database. ITU 2006 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. ITU-T Rec. Q.763 (1999)/Amd.4 (01/2006) iii CO

18、NTENTS Page 1) Clause 0.4 Abbreviations. 1 2) Clause 3.11 Calling partys category . 1 3) Table 5 1 4) New clause 3.103 IEPS call information. 1 5) Tables 32. 3 ITU-T Rec. Q.763 (1999)/Amd.4 (01/2006) 1 ITU-T Recommendation Q.763 Signalling System No. 7 ISDN User Part formats and codes Amendment 4 Su

19、pport for the International Emergency Preference Scheme 1) Clause 0.4 Abbreviations Insert the following new abbreviation alphabetically: IEPS International Emergency Preference Scheme 2) Clause 3.11 Calling partys category Change the following in Figure 12, which had been a spare value: 0 0 0 0 1 1

20、 1 0 spareIEPS call marking for preferential call set up 3) Table 5 Modify Table 5 in order to introduce the following new IEPS call information parameter (3.103) alphabetically: Table 5/Q.763 Parameter name Reference (subclause) Code IEPS call information 3.103 1 0 1 0 0 1 1 0 4) New clause 3.103 I

21、EPS call information Add new clause 3.103 as follows: 3.103 IEPS call information The format of the IEPS call information parameter field is shown in Figure 96-a. 8 7 6 5 4 3 2 1 1 Country/International network of call origination 2 Priority levelFigure 96-a/Q.763 IEPS call information parameter fie

22、ld 2 ITU-T Rec. Q.763 (1999)/Amd.4 (01/2006) The following codes are used in the subfields of the IEPS call information parameter field: a) Country/International network of call origination 8 7 6 5 4 3 2 1 1 O/E spare Numbering plan indicator Length of country/international network of call originati

23、on 1a 2nd digit 1st digit 1b 1m Filler (if necessary) Nth digit Figure 96-b/Q.763 Country/International network of call origination subfield 1) Odd/even indicator (O/E): as in 3.9 a). 2) Numbering plan indicator 000 spare 001 numbering plan according to ITU-T Rec. X.121 010 numbering plan according

24、to ITU-T Rec. E.164 3) Length of country/international network of call origination Number of octets to follow that contain the digits identifying the country or international network of call origination. 4) Digits Digit string of flexible length in BCD encoding identifying either the country or inte

25、rnational network of call origination. To identify a specific country of call origination, the digit string will consist of the X.121 country code (3 digits). To identify an international network of call origination, the digit string will consist of an E.164 country code for international networks (

26、3 digits) followed by an identification code (1 to 4 digits) to identify the international network. 5) Filler In case of an odd number of digits, the filler code 0000 is inserted after the last digit. b) Priority level 8 7 6 5 4 3 2 1 2 spare Priority level Figure 96-c/Q.763 Priority level subfield

27、This subfield carries national priority level of an IEPS call according to bilateral agreements. The priority level is signalled in inverse order of the numerical value. i.e., the lower the numerical value is, the higher the priority. For example, numerical value 0 indicates the highest priority pos

28、sible. ITU-T Rec. Q.763 (1999)/Amd.4 (01/2006) 3 5) Table 32 Add new IEPS call information parameter prior to the “End of optional parameters“: Table 32/Q.763 Message Type: Initial address Parameter Reference (subclause) Type Length (octets) IEPS call information 3.103 O 6-8 Printed in Switzerland G

29、eneva, 2006 SERIES OF ITU-T RECOMMENDATIONS Series A Organization of the work of ITU-T Series D General tariff principles Series E Overall network operation, telephone service, service operation and human factors Series F Non-telephone telecommunication services Series G Transmission systems and med

30、ia, digital systems and networks Series H Audiovisual and multimedia systems Series I Integrated services digital network Series J Cable networks and transmission of television, sound programme and other multimedia signals Series K Protection against interference Series L Construction, installation

31、and protection of cables and other elements of outside plant Series M Telecommunication management, including TMN and network maintenance Series N Maintenance: international sound programme and television transmission circuits Series O Specifications of measuring equipment Series P Telephone transmi

32、ssion quality, telephone installations, local line networks Series Q Switching and signalling Series R Telegraph transmission Series S Telegraph services terminal equipment Series T Terminals for telematic services Series U Telegraph switching Series V Data communication over the telephone network Series X Data networks, open system communications and security Series Y Global information infrastructure, Internet protocol aspects and next-generation networks Series Z Languages and general software aspects for telecommunication systems