ITU-T Q 824 0-1995 Stages 2 and 3 Description for the Q3 Interface - Customer Administration - Common Information - Specifications of Signalling System No 7 (Study Group 11)《第二阶段和第.pdf

1、INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 Qm824.0 (1 0/95) STAGES 2 AND 3 DESCRIPTION FOR THE Q3 INTERFACE - CUSTOMER ADMINISTRATION - COMMON INFORMATION ITU-T Recommendation Q.824.0 (Previously “CCITT Recomm

2、endation”) ITU-T RECMN*Q.BZ4. O 95 4862571 Ob12178 bL5 FOREWORD The ITU-T (Telecommunication Standardization Sector) is a permanent organ of the International Telecommunication Union (). The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommen- dations on

3、them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The approv

4、al of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, March 1-12, 1993). IT-T Recommendation Q.824.0 was prepared by IT-T Study Group 11 (1993-1996) and was approved under the WTSC Resolution No. 1 procedure on the 17th of October

5、 1995. NOTE In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. O ITU 1996 Ail rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, el

6、ectronic or mechanical, including photocopying and microfilm, without permission in writing from the IT. ITU-T RECMN+Q.BZ4. O 95 W 4862593 Ob12179 551 W CONTENTS 1 Introduction 1.2 Cross-reference . 1.4 General overview 1.1 Purpose and scope 1.3 Application . 1.5 Managed object naming and attribute

7、syntax . 2 References 3 Basic customer administration object classes . 3.1 Access Channel . 3.3 Access port profile 3.2 Access Port . 3.4 Administered Circuit Endpoint Subgroup 3.5 Bearer Service . 3.6 Customer Profile . 3.7 Directory Number . 3.8 Directory Number E.164 3.9 Directory Number X.121 3.

8、11 Routing Block . Auxiliary Managed Object Classes 4.1 Catalogued Optional User Facilities . 4.2 Catalogued Supplementary Service 4.4 Customized Resource . 4.5 Optional User Facilities 4.6 Supplementary Service Service Dependent 4.7 Supplementary Service Service Independent 4.8 Teleservice Operatio

9、ns support managed object classes . 5.1 Service Manager . 5.2 Service Package 6 Package templates 6.1 Bearer Signalling Package 6.2 Catalogued Optional User Facilities Package . 6.3 Catalogued Supplementary Service Pointer Package . 6.4 Catalogued Teleservice Package 6.5 Intercept Treatment Originat

10、ing Package . 6.6 Layer Info Package . 6.7 Number of B-Channel Package 6.8 Office Equipment Package . 6.9 Routing Block Pointer Package 3.10 Layer Entity 4 4.3 Catalogued Teleservice . 5 Recommendation Q.824.0 (10/95) Page 1 1 1 1 1 2 8 9 9 9 10 10 11 12 12 13 13 14 14 14 14 15 15 16 16 17 18 18 19

11、19 19 20 20 20 20 20 20 21 21 21 21 i ITU-T RECMN*Q*824. O 95 4862593 0632380 273 Page 7 Attribute templates . 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22 7.23 7.24 7.25 7.26 7.27 7.28 7.29 7.30 7.31 7.32 7.33 7.34 7.35 7.36 7.37 7.38 7.39 7.4

12、0 7.41 7.42 7.43 7.44 7.45 7.46 7.47 7.48 7.49 7.50 7.51 7.52 Access Channel Pointer List . Access Port Profile Id . Access Port Profile Pointer . Access Port Profile Pointer List Bearer Service Id Bearer Service Pointer Bearer Service Pointer List . Catalogued Optional User Facilities Id . Catalogu

13、ed Optional User Facilities Pointer . Catalogued Supplementary Service Id Catalogued Supplementary Service Pointer Catalogued Teleservice Id Catalogued Teleservice Pointer Circuit Endpoint Subgroup Ordered Pointer List . Circuit Endpoint Subgroup Pointer List . Customer Profile Id . Customer Profile

14、 Pointer Customer Profile Pointer List . Customized Resource Id . Customized Resource Pointer List Directory Number Id . Directory Number Pointer List . E . 164 Directory Number Intercept Treatment Originating . Intercept Treatment Terminating Layer 2 Signalling Entity Pointer . Layer 3 Signalling E

15、ntity Pointer . Layer 4 Entity Pointer . Layer 4 Entity Type Layer 5 Entity Type Layer 6 Entity Type Layer 7 Entity Type Layer Entity Id Number Of E-Channels Office Equipment Office Equipment List Optional User Facilities Id Layer 5 Entity Pointer . Layer 6 Entity Pointer . Layer 7 Entity Pointer .

16、Routing Block Id . Routing Block Pointer Routing Block Pointer List . Sensitive Circuit Service Manager Id . Service Package Id Service Pointer List . Supplementary Service Id . Supported By Access Port Pointer List . Teleservice Id Teleservice Pointer List X . 12 1 Directory Number 21 21 22 22 22 2

17、2 22 23 23 23 23 23 24 24 24 24 24 25 25 25 25 26 26 26 26 27 28 28 28 28 28 29 29 29 29 29 29 30 30 30 30 30 31 31 31 31 31 32 32 32 32 33 33 ii Recommendation Q.824.0 (10195) ITU-T RECMN*QmB24 . O 95 m 4862591 OhL2LBL LOT m . Name . 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.1 1 8.12 8.13 8.14 8.1

18、5 8.16 8.17 8.18 8.19 accessChanne1-accessport Name Binding administeredCircuitEndPointSubgroup-customerProfile Name Binding . bearerservice-customerProfile Name Binding . accessPortProfile-managedElement Name Binding . cataloguedOptionalUserFacilities-managedElement Name Binding cataloguedSupplemen

19、taryService-managedElement Name Binding cataloguedTeleservice-managealement Name Binding . customerProfile-managedElement Name Binding customizedResource-customerProfile Name Binding directoryNumber-managedElement Name Binding 1ayerEntity-customerProfile Name Binding . optionalUserFacilities-bearers

20、ervice Name Binding routingBlock-customerProfile Name Binding serviceManager-managedElement Name Binding servicepackage-managedElement Name Binding supplementaryServiceServiceDependent-bearerService Name Binding supplementary ServiceServiceDependent-teleservice Name Binding . supplementaryServiceSer

21、viceIndependent-customerProfile Name Binding teleservice-customerl?rofile Name Binding 9 Actions . Insert Circuit Subgroups Action . Insert CSG Channels Action . Modify Circuit Subgroup Action Remove Circuit Subgroups Action . Remove CSG Channels Action . 10 Type definitions . 11 Service definitions

22、 1 i . 1 Conventions 11.2 Insert CSG Channels . 11.3 Remove CSG Channels 11.4 Insert Circuit Subgroups . 11.5 Remove Circuit Subgroups . 11.6 Modify Circuit Subgroup 9.1 9.2 9.3 9.4 9.5 Appendix I - Combinations of services with resources . Recommendation Q.824.0 (10/95) Page 33 33 33 33 34 34 34 34

23、 34 35 35 35 35 35 36 36 36 36 37 37 37 37 31 38 38 38 38 40 40 40 42 43 44 45 46 . 111 SUMMARY The purpose of this Recommendation is to provide the common Stages 2 and 3 description of the Q3 interface between a local exchange and the Telecommunications Management Network (TMN) for the support of c

24、onfiguration management functions in support of customer administration. Customer administration is a management activity that the network operator performs in order to exchange with the customer ail the customer related management data and functions required to offer a telecommunications service, a

25、nd to exchange with the network all the customer related management data and functions necessary for the network to produce that telecommunications service. This Recommendation supports the administration of the customer configuration in the local exchange by the TMN. This Recommendation is part of

26、a series of Recommendations. In this Recommendation the common non-technology specific managed objects are defined. iv Recommendation Q.824.0 (10/95) ITU-T RECMNUQ-824- O 95 m 4662591 Ob12183 T82 m Recommendation Q.824.0 STAGES 2 AND 3 DESCRIPTION FOR THE Q3 INTERFACE - CUSTOMER ADMINISTRATION - COM

27、MON INFORMATION (Genevn, 1995) 1 Introduction 1.1 Purpose and scope Customer administration is a management activity that the network operator performs in order to exchange with the customer all the customer related management data and functions required to offer a telecommunications service and to

28、exchange with the network all the customer related management data and functions necessary for the network to produce that telecommunications service. The purpose of this Recommendation is to provide the common Stages 2 and 3 description of the Q3 interface between a local exchange and the Telecommu

29、nications Management Network (TMN) for the support of configuration management functions. The Q3 interface is the TMN interface between network elements or Q-adapters which interface to Operations Systems (0%) without mediation and between OSs and mediation devices as described in Recommendation M.3

30、100. 1.2 Cross-reference This Recommendation is based on the Stage i management service description given in the M.3000-Series Recommendations including Recommendation M.3400. This Recommendation provides the Stages 2 and 3 descriptions for handling Customer Administration services either over a 43

31、interface or over the ISDN UNI as described in Recommendation Q.942. 1.3 Application The management information included in this Recommendation may be exchanged by implementations of the Common Management Information Service Element (CMISE). The Transaction-Oriented class of OAM in relationships imp

32、lemented via pointers the pointer value will be null if an instance cannot or does not participate in the relationship. See Figures la, lb and IC. 1.4.1.2 Inheritance hierarchy See Figure 2. 1.5 Throughout this Recommendation, all attributes are named according to the following guidelines: Managed o

33、bject naming and attribute syntax - The name of an attribute is composed of the name of an object class followed by the string “Ptr” if and only if the attribute value is intended to identify a specific object class. If an attribute value is intended to identify different object classes, a descripti

34、ve name is given to that attribute and a description is provided in the attribute behaviour. The name of an attribute is composed of the name of an object class followed by the string “Id” if and only if the attribute value is intended to identify the name of the object class holding that attribute.

35、 - - See Figure 3. 2 Recommendation Q.824.0 (10/95) ITU-T I I 3 Recommendation Q.824.0 (10/95) Managed Element I I I customer Access Port Profile Directory Number (Note 1 ) I I T11727009Y602 I3 I I NOTES 1 as indicated for Directory Number. Directory Number has 2 Subclasses. Directory Number E. 164

36、and Directory Number X. 121. These subclasses are used 2 Additional relationships are defined for the same subclasses of these objects. See the remainder of the Q.824-series Recom- mendations. Except for Managed Element, only managed object classes defined in Recommendation Q.824.0 are shown in this

37、 figure. FIGURE 1 WQ. 824.0 Entity-Relationship model - Part B 4 Recommendation Q.824.0 (10/95) ITU-T RECMN*Q.824. O 95 W 4862571 Ob12187 628 Managed Element Service Service Manager Package T1172710Wd03 NOTE - Except for Managed Element, only managed object classes defined in Recommendation 4.824.0

38、are shown in this figure. Additional relationships are defined for the same subclasses of these objects. See the remainder of the Q.824-Series Recommendations. FIGURE 1dQ.824.0 Entity-Relationship model -Part C Recommendation Q.824.0 (10195) 5 X721: LLk ITU-T RECflN*Q*82LI* 0 95 4862591 0612188 564

39、customer Profile -Eil l- 4 terminationpoint M.3100“: 1 M.3100: 4 managedElment -czIl teleservice SUpplementary-Cenii- I 1 I I I M.3100: I I connection- Termination- PointCource - II accesschannel M.3100: connection- Termination- Point- Bidireconal M.3100: Termination- Pointsink I M.3100: I Teminatio

40、n- PointCource I I I I I M.3100“: trail-Termination- Point-Bidirectional M.3100: trail-Termination- Pointsink routingBlcc k 3 3 layer Entity directow umber- -+ E.164 directotyblumber- 4 serviceManager I ceMcePackage -EI FIGURE 2/Q.824.0 Inheritance hierarchy circuitEnd- PointSugrwp administered- Cir

41、cuitEnd- PointSubgroup catalogued- TdeseMce catalogued Supplementary SeMce Supplementary SerieceService -Independent catalogued- OptionalUserFacilities T1172720-95IdO4 6 Recommendation Q.824.0 (10195) ITU-T managedElernent REC MN*Q custornerProfile 0 I I l cataloguedsupple- -I rnentaryservice cataio

42、guedTeleservice i_z? UserFaciliiies -c? directoryNumber E serviceManager 7 service Package adrninictered- CircuitEndPoint- i Subgroup routing Block supplernentaryService- ServiceDependent - - bearerservice - - optionalkerfacilities Resource IayerEntity i supplernentaty- ServiceSeNice- 1 Independent

43、supplernentaryService- SeNiceDependent teleservice I I T11727.? all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid IT-T Recommendations is

44、 regularly published. - CCITT Recommendation E. 164 (1991), Numbering plan for the ISDN era. - IT-T Recommendation 1.210 (1993), Principles of telecommunication services supported by an ISDN and the means to describe them. - CCITT Recommendation 1.240 (1988), Definition of teleservices. - CCITT Reco

45、mmendation M.3010 (1992), Principles for a telecommunications management network. - CCITT Recommendation M.3020 (1992), TMN integ5ace specification methodology. - IT-T Recommendation M.3100 (1993, Generic network information model. - CCIT Recommendation M.3400 (1992), TMN management functions. - ITU

46、-T Recommendation Q.8 1 1 (1993), Lower layer protocol profiles for the Q3 interface. - IT-T Recommendation 4.812 (1993), Upper layer protocol profiles for the Q3 interface. - IT-T Recommendation Q.931 (1993), Digital subscriber Signalling System No.1 (DSS i) - ISDN user-network integ5ace layer 3 sp

47、ecification for basic call control. - IT-T Recommendation X.2 (1 993), International data transmission services and optional user facilities in public data networks and ISDNs. - CCITT Recommendation X. 121 (1992), International numbering plan for public data networks. - CCITT Recommendation X.700 (1

48、992), Management framework for Open Systems Interconnection (OSI) for CCIT applications. - CCITT Recommendation X.701 (1992), Information technology - Open Systems Interconnection - Systems management overview. - CCITT Recommendation X.710 (1991), Common management information service definition for

49、 CCI7T applications. - CCITT Recommendation X.711 (1991), Common management information protocol specijkation for CClT applications. - CCITT Recommendation X.720 (1992), Information technology - Open Systems Interconnection - Structure of management information: Management information model. - CCITT Recommendation X.721 (1992), Information technology - Open Systems Interconnection - Structure of munagement information: Definition of management information. - CCITT Recommendation X.722 (1992), Information technology - Open Systems Interconnection - Structure