ITU-T Q 824 5 CORR 1-2000 Stage 2 and Stage 3 Description for the Q3 Interface - Customer Administration Configuration Management of V5 Interface Environments and Associated Customng.pdf

1、INTERNATIONAL TELECOMMUNICATION UNION ITU=T TE LEC0 MM U N CATION STAN DARD IZATION SECTOR OF ITU Q.824.5 Corrigendum 1 (02/2000) SERIES Q: SWITCHING AND SIGNALLING Specifications of Signalling System No. 7 - Q3 interface Stage 2 and stage 3 description for the Q3 interface - Customer administration

2、: Configuration management of V5 interface environments and associated customer profiles Corrigendum I ITU-T Recommendation Q.824.5 - Corrigendum 1 (Formerly CCITT Recommendation) STDsITU-T RECMN Qm824.5 CORR II-ENGL ZOOU 48b259L Ob89034 140 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SI

3、GNALLING IN THE INTERNATIONAL MANUAL SERVICE FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4 AND No. 5 SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 SPECIFICATIONS OF SIGNALLING SYSTEM R1 SPECIFICATIONS OF SIGNALLING SYSTEM R2 DIGITAL EXCHANGES INTERWO

4、RKING OF SIGNALLING SYSTEMS SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WOlUUNG CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS General Message transfer part (MTF) Signalling connection control part (SCCP) Telephone user part (TUP) ISDN supplementary services Da

5、ta user part Signalling System No. 7 management ISDN user part Transaction capabilities application part Q. 14.3 4.4-4.59 Q .604.99 Q.100-Q.119 Q. 120-4.249 4.250-4.309 4.310-4.399 Q.40W.499 4.500-4.599 Q .60O-Q. 699 4.700-4.849 4.700 4.701-4.709 4.711-4.719 4.720-4.729 4.730-4.739 Q.74Q-Q.749 4.750

6、-4.759 4.760-4.769 4.770-4.779 Test specification Q.780-Q.799 Q.SSO-Q.999 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 PUBLIC LAND MOBILE NETWORK INTERWORKING WITH SATELLITE MOBILE SYSTEMS INTELLIGENT NETWORK SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 BROADBAND ISDN Q. 1000-Q. 1099 Q.1100-Q. 1

7、 199 Q.1200-4.1699 Q. 1700-4. 1799 Q.200Q-Q.2999 For further details, please refer to the list of ITU-T Recommendations. STD-ITU-T RECMN 12.824.5 CORR 1-ENGL 2000 m 4862593 0b89035 O7 = ITU-T Recommendation Q.824.5 Stage 2 and Stage 3 description forthe 43 interface - Customer administration: Config

8、uration management of V5 interface environments and associated customer profiles CORRIGENDUM 1 Summary This corrigendum corrects defects identified in Recommendation 4.824.5 (1997). It includes a table providing the relation between the defects and the corrections. These corrections are specified as

9、 changes to existing clauses of Recommendation Q.824.5 (1997). Source Corrigendum 1 to ITU-T Recommendation Q.824.5 was prepared by ITU-T Study Group 4 (1997-2000) and approved under the WTSC Resolution 1 procedure on 4 February 2000. ITU-T Recommendation 4.824.5 DR-Q824.5-2 Definition of package mi

10、ssing DR-Q824.5-3 Unrecognized superclass reference DR-0824.54 Unrecognized abstract syntax reference Stage 2 and stage 3 description forthe 43 interface - Customer administration: Configuration management of V5 interface environments and associated customer profiles 2,24 3 17 CORRIGENDUM 1 DR-Q824.

11、5-1 O DR-Q824.5-11 DR-Q824.5- 12 DR-Q824.5-13 DR-Q824.5-14 DR-Q824.5-15 1 Introduction This comgendum corrects a number of defects to Recommendation 4.824.5 that have previously been documented and resolved in the Q.830-series Plus Implementors Guide. This corrigendum replaces the hplementors Guide

12、as the authoritative source. However, the defects corrected in this comgendum will be reflected in the Implementors Guide until this corrigendum has been published. Additional defects and resolutions will again be recorded in the Implementors Guide and finally be published in an additional corrigend

13、um or a revision of Recommendation 4.824.5. Identifiermissing in ASN. 1 type RkeaseReciprocalPointerZesult Identifier missing in ASN. 1 type SetReciprocalPointersResult missing Name of ASN.1 type already assigned in ITU-T Rec. X.711 ASN. 1 type pointer defined in different ASN. 1 modules Statement i

14、n contradiction with G.965 32 32 11 30,32 32 1 Package “ITU-T Rec. M.3 100“ : stateChangeNotificationPackage 2 Resolved defects This comgendum corrects the following defects reported against Recommendation 4.824.5 (1 997): DR-Q824.5-17 DR-Q824.5-18 Defect number I Issue 1 Correction NO. Attribute na

15、me already assigned in ITU-T Rec. G.774 13,31 2,3,5, 9, 10, 12, 13, 16, 18, 22, 23,25,26 Misalignment in references to supporting Recs. DR-Q824.5-1 I Illegal GDMO 12 DR-Q824.5-5 I Duplicate template name I 27 DR-Q824.5-6 I Inconsistency with the name of the attribute peeruserlabel I2,21,28 DR-Q824.5

16、-8 I Illegal character in ASN. 1 type FrotocolVersion 132 DR-Q824.5-9 I Illegal character in ASN. 1 type ProtocolVersion I32 DR-Q824.5-16 I Attribute name already assigned in ITU-T Rec. G.774 I 12, 13,29 DR-Q824.5-19 I Misalignment in references to supporting Recs. I 8, 26 DR-Q824.5-20 I Misalignmen

17、t in references to supporting Recs. 16, 8, 14, 15 Defect number DR-Q824.5-21 DR-Q824.5-22 DR-Q824.5-23 “Protection group 1 and its contained protection unit(s) are to be instantiated for the V5.2 case even if there is only one 2048 kbits link.“ with the following: “Protection group 1 and its contain

18、ed protection unit(s) need not to be instantiated for the V5.2 case if there is only one 2048 kbits link.“ 2) Subclause 6.1.1.2.1 “V5 interface“ Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: Issue Correction No. Remove cross-references from several behaviours Illegal GDMO

19、19 Illegal GDMO 20 3,4,6, 7, 9, 10 “ITU-T Recommendation X.721“: top; Correct the GDMO definition related to the v5Identijkation attribute to read: v5Identification GET, Correct the GDMO definition related to the peerUserLabelPackage package to read: PeerManagedElementPackage PRESENT IF “an instance

20、 supports it“, Correct the GDMO definition related to the supportedByObjectListPackage package to read: SSupportedByObjectListPackage PRESENT IF “the information model is not only used for provisioning“, 3) Subclause 6.1.1.2.2 “V5 TTP“ Correct the reference to ITU-T Recommendation M.31 O0 in the GDM

21、O to read: “ITU-T Recommendation M.3100“:trailTerminatonPointBidirectional; Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: “ITU-T Recommendation X,72l“:administrativeStatePackage, Replace the following words in the behaviour: “as described in CCITT Rec. X.731 1 ISODEC 10164

22、-2 22“ with the following ones: “as described in CCITT Rec. X.731 I ISO/IEC 10164-2“ Replace the following words in the behaviour: “specified in ITU-T Recommendation Q.831 12.“ with the following ones: “specified in ITU-T Recommendation 4.831 .“ STD-ITU-T RECMN Q.424-5 CORR 2-ENGL 2000 W 48b2572 Ob8

23、7038 87b = 4) Replace the following words in the behaviour: Subclause 6.1.1.2.3 “V5 time slot“ “specified in ITU-T Recommendation Q.831 12.“ with the following ones: “specified in ITU-T Recommendation 4.831.“ 5) Subclause 6.1.1.2.4 “V5 provision“ Correct the reference to ITU-T Recommendation X. 721

24、in the GDMO to read: “ITU-T Recommendation X.721 “:top; 6) Correct the reference to ITU-T Recommendation Q.824. O in the GDMO to read: Subclause 6.1.1.3.1 “Virtual access port“ “ITU-T Recommendation Q.824.0“:accessPort; Replace the following words in the behaviour: “specified in ITU-T Recommendation

25、 4.831 12.“ with the following ones: “specified in ITU-T Recommendation Q.831.“ 7) Replace the following words in the condition for the instantiation of the conditional package actingRoleFkg: Subclause 6.1.1.3.4 “Virtual primary rate access“ “ITU-T Recommendation 1.310 6.“ with the following ones: “

26、ITU-T Recommendation 1.31 O.“ 8) Correct the reference to ITU-T Recommendation Q. 824. O in the GDMO to read: Subclause 6.1.1.3.6 “Virtual access channel“ “ITU-T Recommendation Q.824.0“:accessChannel; Correct the reference to ITU-T Recommendation M.31 O0 in the GDMO to read: “ITU-T Recommendation M.

27、3100“:ctpInstancePackage, 9) Correct the references to ITU-T Recommendation X. 721 in the GDMO to read: Subclause 6.1.1.4.1 “V5 communication channel“ “ITU-T Recommendation X.721 “:top; “ITU-T Recommendation X.721“ :objectcreation, “ITU-T Recommendation X.721 “:objectDeletion; Replace the following

28、words in the behaviour: “are given in ITU-T Recommendations G.964 141 and 6.965 SI. STD.ITU-T RECMN Q.824-5 CORR 3-ENGL 2000 4862593 Ob89037 722 with the following ones: “are given in ITU-T Recommendations G.964 and G.965.“ 10) Subclause 6.1.1.4.2 “Communication path“ Correct the references to ITU-T

29、 Recommendation X 721 in the GDMO to read: “ITU-T Recommendation X.721“:top; “ITU-T Recommendation X.721 “:objectCreation, “ITU-T Recommendation X.721 “:objectDeletion; Replace the following words in the behaviour: “are given in ITU-T Recommendations G.964 141 and G.965 5.“ with the following ones:

30、“are given in ITU-T Recommendations G.964 and G.965.“ 11) Add the following new subclass commChannelR1 managed object class definition in a new subclause 6.1.1.4.9: New subclause 6.1.1.4.9 “V5 communication channel R1“ commChannelR1 MANAGED OBJECT CLASS DERIVED FROM commChannel; CHARACTERIZED BY com

31、mChannelRlPackage PACKAGE NOTIFICATIONS “IT-T Recommendation X.721“:stateChange; REGISTERED AS managedObjectClass 29); 12) Correct the references to ITU-T Recommendation X. 721 in the GDMO to read: Subclause 6.1.1.5.1 “V5 protection group“ “ITU-T Recommendation X.721 “:top; Replace the following wor

32、d in the behaviour: “reliableResourcePointer “ with the following one. “v5ReliableResourcePointer“ 13) Correct the references to ITU-T Recommendation X 721 in the GDMO to read: Subclause 6.1.1.5.2 “V5 protection unit“ “ITU-T Recomrnenda tion X.72 1 “:top; Correct the GDMO definition related to the r

33、eliableResourcePointer attribute to read: v5ReliableResourcePointer GET, Correct the GDMO definition related to the unreliableResourcePointer attribute to read: v5UnreliableResourcePointer GET, Replace the following word in the behaviour: “reliableResourcePointer“ “v5ReliableResour cePoin ter“ 14) C

34、orrect the reference to ITU-T Recommendation Q.824.0 in the GDMO to read: Subclause 6.1.1.6.1 Y5 bearer channel reservation“ “ITU-T Recomrnenda tion 4.824.0“ :supplementaryServiceServiceIndependent; 15) Correct the reference to ITU-T Recommendation Q.824. O in the GDMO to read: Subclause 6.1.1.6.2 “

35、V5 leased line reservation “ITU-T Recommendation Q.824.0“:supplementaryServiceServiceIndependent; 16) Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: Subclause 6.1.2.3.1 “User port TTP“ “ITU-T Recommendation X.721“ :administrativestatepackage, 17) Subclause 6.1.2.3.4 “PSTN u

36、ser port“ Correct the ASN. 1 module reference in the default value specipcation of the specialFeatures attribute to read: specialFeatures DEFAULT VALUE ASN1 CMANTypeModule.defau1tSpecialFeature.s GET-REPLACE ADD-REMOVE; 18) Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: Sub

37、clause 6.1.2.3.6 “User port bearer channel CTP“ “ITU-T Recommendation X.721“:administrativeStatePackage PRESENT IF “an instance supports it“, 19) Subclause 6.2.1.1 O “virtualAccessChanne1-virtualAccessPort“ Correct the reference to the superior object class in the GDMO to read: SUPERIOR OBJECT CLASS

38、 virtualAccessPort AND SUBCLASSES; 20) Subclause 6.2.2.4 “userPortBearerChannelCtp-userPortTtp“ Correct the reference to the subordinate object class in the GDMO to read: SUBORDINATE OBJECT CLASS UserPortBearerChanneiCtp AND SUBCLASSES; 21) Redefine the subclause to read: Subclause 6.3.12 “Peer user

39、 label 6.3.12 Peer managed element peerManagedElementPackage PACKAGE ATTRIBUTES peerManagedElement GET-REPLACE; REGISTERED AS package 13); STD-ITU-T RECMN 9-824.5 CORR 1-ENGL 2000 4862593 Ob89043 380 22) Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: Subclause 6.3.14 “Relat

40、ionship change notification“ “ITU-T Recommendation X.721 “:relationshipChange; 23) Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: Subclause 6.3.15 “V5 availability status“ “ITU-T Recommendation X.721 “:availabilityStatus GET; 24) Add the following new SSupportedByObjectList

41、Package package definition in a new subclause 6.3.x following existing subclause 6.3.1 7: New subclause 6.3.x “V5 supported by object list“ v5SupportedByObjectListPackage PACKAGE ATTRIBUTES “ITU-T Recommendation M3100“:supportedByObjectList GET SET-BY-CREATE; REGISTERED AS package 21; 25) Correct th

42、e reference to ITU-T Recommendation X. 721 in the GDMO to read: Subclause 6.3.18 “V5 time slot administrative state“ “ITU-T Recommendation X.721 “:administrativeState GET-REPLACE; 26) Correct the reference to ITU-T Recommendation M.31 O0 in the GDMO to read: Subclause 6.3.1 9 “V5 TMN communications

43、alarm information“ “ITU-T Recommendation M.3100“:alarmStatus GET, “ITU-T Recommendation M.3100“:currentProb1emlist GET; Correct the reference to ITU-T Recommendation X 721 in the GDMO to read: “ITU-T Recommendation X.721 “:communicationsAlarm 27) Subclause 6.5.2 “Acting role“ Correct the GDMO defini

44、tion related to the actingRole behaviour to read: actingRoleBehaviour BEHAVIOUR 28) Correct the GDMO definition related to the peerUserLabe1 attribute to read: Subclause 6.5.32 “Peer managed element“ peerManagedElement ATTRIBUTE Correct the GDMO definition related to the peerUserLabelBehaviour behav

45、iour to read: PeerManagedElementBehaviour BEHAVIOUR 29) Subclause 6.5.35 “Reliable resource pointer“ Correct the subclause header to read: 6.5.35 V5 reliable resource pointer Correct the GDMO de$nition related to the reliableResourcePointer attribute to read: v5ReliableResourcePointer ATTRIBUTE STD.

46、1TU-T RECflN 8.824.5 CORR 1-ENGL 2000 48b2591 Ob87042 217 Correct the GDMO de$nition related to the reliableResourcePoiterBehaviour behaviour to read: SReliableResourcePointerBehaviour BEHAVIOUR 30) Correct the ASN. 1 module reference of the supportedProtoco1 Version attribute to read: Subclause 6.5

47、.38 “Supported protocol version“ WITH ATTRIBUTE SYNTAX ASN1 CMLETypeModule.V5SupportedProtocolVersion; 31) Correct the subclause header to read: Subclause 6.5.39 “Unreliable resource pointer“ 6.5.39 V5 unreliable resource pointer Correct the GDMO definition related to the UnreIiableResourcePointer a

48、ttribute to read: v5UnreliableResourcePointer ATTRIBUTE Correct the GDMO definition related to the unreliableResourcePointerBehaviour behaviour to read: v5unreliableResourcePointerBehaviour BEHAVIOUR 32) Modzfi: Subclause 6.8 “ASN.1 defied types module“ Pointer := CHOICE objectInstance O ObjectInsta

49、nce, null i NULL to read: Pointer := PointerOrNull Modifi: ProtocolVersion := ENUMERATED v5.1 (i), v5.2 (2), .) to read: V5SupportedProtocolVersion := ENUMERATED v5dotl (i), v5dot2 (2), . Modifi: ReleaseReciprocalPointersResult := SEQUENCE OriginalPointerInfo OriginalPointerInfo, CHOICE failed O Failed, released i NULL STD-ITU-T RECMN Q-824.5 CORR II-ENGL 2000 4862592 Ob89043 153 M to read: ReleaseReciprocalPointersResult : := SEQUENCE OriginalPointerInfo OriginalPointerInfo, res