ITU-T SERIES P SUPP 16-1988 Guidelines for Placement of Microphones and Loudspeakers in Telephone Conference Rooms [1] and for Group Audio Terminals (GATs) - Series P Telephone Traa.pdf

1、INTERNATIONAL TELECOM MUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Series P Supplement 16 (1 1 /88) SERIES P: TELEPHONE TRANSMISSION QUALITY, TELEPHONE INSTALLATIONS, LOCAL LINE NETWORKS Guidelines for placement of microphones and loudspeakers in telephone conference rooms

2、I and for Group Audio Terminals (GATS) ITU-T P-series Recommendations Supplement 16 (Previously CCITT Recommendations) ITU-T P-SERIES RECOMMENDATIONS TELEPHONE TRANSMISSION QUALITY, TELEPHONE INSTALLATIONS, LOCAL LINE NETWORKS Vocabulary and effects of transmission parameters on customer opinion of

3、transmission quality Subscribers lines and sets Transmission standards Objective measuring apparatus Objective electro-acoustical measurements Measurements related to speech loudness Methods for objective and subjective assessment of quality Audiovisual quality in multimedia services Series Series S

4、eries Series Series Series Series Series P. 10 P.30 P.300 P.40 P.50 P.500 P.60 P.70 P.80 P.800 P.900 For further details, please refer to ITU-T List of Recommendations. FOREWORD ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommuni- cations.

5、 The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunica

6、tion Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Re

7、solution No. 1. In some areas of information technology which fall within ITU-T?s purview, the necessary standards are prepared on a collaborative basis with IS0 and IEC. NOTE In this Recommendation the term recognized operating agency (ROA) includes any individual, company, corporation or governmen

8、tal organization that operates a public correspondence service. The terms Administration, ROA and public correspondence are defined in the Constitution of the ITU (Geneva, 1992). INTELLECTUAL PROPERTY RIGHTS The ITU draws attention to the possibility that the practice or implementation of this Recom

9、mendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of

10、 approval of this Recommendation, the ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult

11、 the TSB patent database. O ITU 1999 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. Supplement 16 - Series P (11/88) i CONTENTS Pag

12、e 1 General . 1 2 Conference room acoustics - General requirements 1 3 Ambient noise level considerations 2 4 Reverberation considerations . 3 5 Microphone type and placement . 4 6 Loudspeaker placement 5 Reference . 5 11 Supplement 16 - Series P (11/88) Supplement 16l to P-series Recommendations GU

13、IDELINES FOR PLACEMENT OF MICROPHONES AND LOUDSPEAKERS IN TELEPHONE CONFERENCE ROOMS i AND FOR GROUP AUDIO TERMINALS (GATS) (Malaga-Torremolinos, 1984; amended Melbourne, 1988) (Quoted in Recommendations G.172 and P.30) 1 General The following guidelines provide basic rules for assessing the acousti

14、cs of telephone conference rooms and for installing group audio terminals consistent with maximum speech intelligibility and easy talker recognition. 2 The design and installation of a telephone conferencing system or group audio terminals which meet reasonable cost and performance specifications in

15、volve numerous judgements and trade-offs. These guidelines will enable the planner and installation engineer to assess the acoustics of a room, to make the necessary choices and decisions, to install the appropriate equipment properly and thereby provide satisfactory service. The audio portion of a

16、group audio terminal consists of terminal equipment with microphones and loudspeakers installed in conference rooms and interconnected by an audio transmission facility. This transmission facility may be either public switched telephone connections or private line facilities. In both public and priv

17、ate systems, transmission is frequently interconnected via a multipoint conference bridge so that each room can communicate simultaneously with any of the other locations. When this is done, it is most important that the bridge be located at the electrical loss center of the network in order to mini

18、mize level contrast between the speech originating in the different rooms. Unlike telephony between handsets, the acoustic properties of the conference room and the placement of microphones in the room critically determine the level, the speech signal-to-ambient-noise ratio and the reverberant quali

19、ty (rain-barrel effect) of the transmitted speech. Particularly in multipoint conferences, these three factors are easily judged and critically commented upon by users. In general, the larger, noisier and more reverberant a room is, the less suitable it will be for group communication. The presence

20、of noise and/or reverberation in the transmitted speech results in a system whose performance is unsatisfactory. In extreme cases, experience has demonstrated that excess noise in one room, e.g. from overflying aircraft, can temporarily block transmission between all rooms of a multipoint system. Ex

21、cess reverberation results in such hollowness to the received speech that talkers become difficult to recognize and understand, causing users to fatigue easily and refuse to use the system. In principle, any room is suitable for group communication if these guidelines are followed. However, the guid

22、elines will dictate that in a noisy or reverberant room, talkers must speak so close to microphones that they might as well use handsets. The user requesting the installation must then choose one or more of the following options: i) select another conference room; 2) 3) Several very important criter

23、ia must be fulfilled simultaneously to assure satisfactory audio performance of a telephone conference system. The balance of this section describes the determination of these criteria. Briefly, these criteria are: i) 2) Conference room acoustics - General requirements acoustically treat the room; o

24、r accept the close microphone/talker distances dictated by the guidelines. A room suitable for a normal face-to-face conference must be selected. A noise dependent microphone/talker distance must be determined. Formerly supplement No. 25 to Fascicle III.1 (Red Book). 3) 4) A reverberation dependent

25、microphone/talker distance must be determined. The microphones and loudspeakers must be positioned in accordance with both these distances. Conference room for 20 people Conference room for 10 people 3 Ambient noise level considerations 40 Quiet, satisfactory for conferences at tables 4.5 m in lengt

26、h 45 Satisfactory for conferences at tables 1.5-2.5 min length The ambient noise level requirements for conference rooms of increasing size and number of conferences are given in Table 1. As the room size and number of conferences increase, the participants will sit further apart. Consequently, for

27、comfortable talking and listening, the ambient noise level in the room must decrease as the group size increases. Table 1 - Ambient noise level limits for conference rooms Room description Maximum sound level meter reading Acoustic environment 35 Very quiet, suitable for large conferences at tables

28、6-9 m in length 50 Satisfactory for conferences at tables 1.0-1.5 min length Noise measurements as stipulated in Table 1 should be performed at the conference table with the room in normal operation but unoccupied. These noise measurements should be performed at least 0.6 m away from any surface. No

29、ise measurements in dl3A can be made with a sound level meter employing A-weighting, a reference pressure level of 20 p Pascal and otherwise conforming to Recommendation P.54. A-weighting is used in these guidelines since it approximates the annoyance level of noise to the human ear. The maximum mic

30、rophone/talker distance is limited by ambient noise. Figure 1 shows the maximum distance between a talker and a microphone which ensures a marginally acceptable signal-to-noise ratio of 20 dl3 in the transmitted speech. No attempt should be made to ignore or increase this distance beyond that determ

31、ined in Figure 1. As an example, with an ambient noise level of 50 where V is the volume of the room in cubic meters, TR is the reverberation time of room in seconds. As the ratio of direct-to-reverberant sound energy decreases with increasing microphone/talker separation, reproduced speech becomes

32、less intelligible, of poorer quality, difficult to recognize and fatiguing to listen to. It acquires a hollowness which sounds as if the person were speaking from the bottom of a rain-barrel. For good performance, microphones should be placed at no more than half the critical distance (0.5 O,) from

33、talkers. This usually requires installing multiple microphones on the conference table or lavaliere microphones2 on conferees, and definitely rules out placing microphones in the ceiling. Many installations for group communication have failed because microphones were installed in ceilings without re

34、gard to the above acoustic requirements. Microphones with an attached, adjustable strap which can be hung around the neck of the user. 4 Supplement 16 - Series P (11/88) When directional (cardioid or bidirectional) microphones are used, the distance between microphones and talkers may be increased b

35、y 50 percent, to three-quarters of the critical distance (0.75 D,). For best results, talkers must sit in front of cardioid (heart shape) microphones; they may sit on either side of a vertically mounted bidirectional microphone with a cosine (figure-eight shape) sensitivity pattern. Table 2 gives ty

36、pical microphone/talker separation distances for small (60-300 m2 of wall, ceiling and floor surface area) and large (300-1000 m2) rectangular conference rooms, together with the estimated critical distance (D,). Areas in square meters are used in these guidelines, since they are much more relevant

37、to conference room acoustics than are the often quoted room volumes. Table 2 - Typical microphone/talker separation (meters) Conference room Small room (60-300 m2) moderate room treatment a) Large room (300-1000 m2) some room treatment a) considerable room treatment a) Omnidirectional microphone 0.3

38、 0.6 0.9 Directional microphone 0.5 0.9 1.4 Critical distance 0.6 1.2 1.8 a) In this context, a room with moderate treatment might have an accoustic ceiling and a carpet on the floor; one with some treatment might have either an accoustic ceiling or a carpet; while a room with considerable treatment

39、 might have heavy, lined drapes covering half the wall area in addition to a high-quality suspended acoustic ceiling and a thick carpet with underfelt. 5 Microphone type and placement As stated earlier, when omnidirectional microphones are used the microphone/talker distance must be less than the ma

40、ximum distance (LI,) determined from Figure 1 to ensure adequate signal-to-noise ratio. When directional microphones are used, the microphone/talker distance can be increased but must be less than 1.5 D,. Also stated earlier, when using omnidirectional microphones, the microphone/talker separation m

41、ust be less than half the critical distance to ensure highly-intelligible, easily-recognizable, nonreverberant speech. When directional microphones are used, the microphone/talker distance can be increased but must be less than 0.75 D,. Microphones must be placed to satisfy both the above rules; in

42、other words the microphone/talker distance must not exceed the smaller distance. So that all talkers can satisfy the above microphone/talker criteria, more than one microphone is usually required. Typically one microphone for every 3 talkers is necessary. For each doubling of the number of microphon

43、es, the effective noise level in the room will increase by 3 dl3. Thus, in the example of Q 3 if four microphones were used, the Supplement 16 - Series P (11/88) 5 reading of 50 dBA would be raised to an effective value of 56 dBA. The noise determined, D, from Figure 1 would thus be reduced to 25 cm

44、. Clearly, lavaliere microphones would provide a practical solution to keeping talkers within 25 centimeters of a microphone. 6 Loudspeaker placement The requirements for placing loudspeakers in a conference room are much less critical than those for microphones. It is generally considered good prac

45、tice to limit the distance from any listener in the room to the nearest loudspeaker to not more than twice the critical distance. Loudspeakers should be distributed in the ceiling, on the walls, or on the conference table to ensure a minimum sound pressure level of 65 dBA at listener positions. If t

46、here is significant noise, the sound pressure level should be at least 20 dB above the ambient noise level. More “presence” and less “voice-on-high” effect is achieved when the loudspeakers are placed on or in the edge of the conference table. Ceiling mounted loudspeakers are usually simpler to inst

47、all and less conspicuous. Generally, loudspeakers installed in a visible grid, suspended, acoustic panel ceiling should be placed approximately 0.6 meters outside the edge of the conference table. Best results are obtained when the loudspeakers are not installed symetrically but somewhat randomly. T

48、his prevents exciting pronounced room modes of vibration. Reference il Teleconference center construction guidelines, Bell System Technical Reference, PUB 42903, May 1980, American Telephone and Telegraph Co. 6 Supplement 16 - Series P (11/88) ITU-T RECOMMENDATIONS SERIES Series A Series B Series C

49、Series D Series E Series F Series G Series H Series I Series J Series K Series L Series M Series N Series O Series P Series Q Series R Series S Series T Series U Series V Series X Series Y Series Z Organization of the work of the ITU-T Means of expression: definitions, symbols, classification General teleconlmunication statistics General tariff principles Overall network operation, telephone service, service operation and human factors Non-telephone telecommunication services Transmission systems and media, digital systems and networks Audiovisual and multimedia systems Integrated