ITU-T T 416 CORR 1-1997 Information Technology - Open Document Architecture (ODA) and Interchange Format Character Content Architectures Technical Corrigendum 1 - Series T Terminal.pdf

1、 STDmITU-T RECMN T-41b CORR II-ENGL II997 m 486259II 0645499 5b9 m INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU T.416 Corrigendum I (1 0/97) SERIES T: TERMINALS FOR TELEMATIC SERVICES Information technology - Open Document Architecture (ODA) and interch

2、ange format: Character content archi tectu res Technical Corrigendum I ITU-T Recommendation T.416 - Corrigendum 1 (Previously CCITT Recommendation) STD-ITU-T RECMN T-Vlb CORR 1-ENGL 1997 D iBb259L O645500 O00 ITU-T T-SERTES RECOMMENDATIONS TERMINALS FOR TELEMATIC SERVICES For further details, please

3、 refer to ITU-TList of Recommendations. INTERNATIONAL STANDARD 8613-6 ITU-T RECOMMENDATION T.416 INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: CHARACTER CONTENT ARCHITECTURES TECHNICAL CORRIGENDUM 1 Source The ITU-T Recommendation T.416, corrigendum 1 was approved

4、 on the 16th of October 1997. The identical text is also published as ISODEC International Standard 86 13-6. ITU-T Rec. T.416 (1993)Kor.l (1997 E) 1 - STD-ITU-T RECMN T.4Lb CORR 1-ENGL 1997 48b2591 Ob45502 983 FOREWORD IT (International Telecommunication Union) is the United Nations Specialized Agen

5、cy in the field of telecommuni- cations. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a

6、worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is cover

7、ed by the procedure laid down in WTSC Resolution No. 1. In some areas of information technology which fall within ITU-T?s purview, the necessary standards are prepared on a collaborative basis with IS0 and IEC. NOTE In this Recommendation, the expression ?Administration? is used for conciseness to i

8、ndicate both a telecommunication administration and a recognized operating agency. INTELLECTUAL PROPERTY RIGHTS The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no positio

9、n concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, the ITU had not received notice of intellectual property, prot

10、ected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database. O ITU 1998 All rights reserved. No part of this publication may be rep

11、roduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. ii ITU-T Rec. T.416-(1993)/Cor.l (1997 E) - STD-ITU-T RECMN T=4Lb CORR 1-ENGL 1997 48b2591 Ob45503 BIT CONTENTS Page 1) General . 1 2) Clause 4

12、 1 3) Subclause 6.6 . 1 4) Subclause 6.8.2 1 5) Clause 6 2 Clause 8 Subclause 8.1 . Subclause 8.1.3 Subclause 8.1.4 Subclause 8.1.5 Subclause 8.2.2 Subclause 9.2.1 Subclause 13.1.1 Subclause 13.1.3 Subclause 13.1.4 Subclause 13.1.5 Subclause 13.1.6 Subclause 13.1.1 1 Subclause 13.1.12 Subclause 13.1

13、.13 Subclause 13.1.15 Subclause 13.1.16 Subclause 13.1.17 Subclause 13.2.1 Subclause 13.2.2 Subclause 13.2.3 Subclause 13.2.4 Subclause 13.3.1 Subclause 13.3.2 Subclause 13.3.3 Subclause 13.5 . Subclause 14.2.1.3.1.1 . Subclause 14.2.1.3.1.2 . Subclause 14.2.1.3.1.3 . Subclause 14.2.1.3.1.4 . Subcla

14、use 14.2.1.3.1.5 . Subclause 14.2.1.3.2 Table 8 Table B.2 Table B.4 Table B.6 Table C.l 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 . ITU-T Rec . T.416 (1993)Kor.l (1997 E) 111 STD-ITU-T RECMN T-416 CORR 1-ENGL 1997 tBb2.591 Ob45504 75b ISOAEC 8613-6 : 1994Kor.l : 1998

15、(E) INTERNATIONAL STANDARD ITU-T RECOMMENDATION INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: CHARACTER CONTENT ARCHITECTURES TECHNICAL CORRIGENDUM 1 1) General a) 13.1.16, 14.2.1.3.1.6 (two occurrences), 14.2.3, clause 16, andin Tables 3, 8and C.I. Replace Line P

16、osition Relative by Line Position Forward in clause 4, and in subclauses 8.3, 13.1.11, 13.1.15, b) 13.1.2andI4.2.1.3.1.8, andin Tables3, 8andC.l. Replace Graphic Character Composition by Graphic Character Combination in clause 4, and in subclauses 8.4, c) 14.2.1.2 and 14.2.3, and in clause 16, and i

17、n Tables 3, 8 and C.1. Replace Partial Line Up by Partial Line Backward in clause 4, and in subclauses 8.3, 13.1.5, 13.1.6, 13.1.11, d) and 14.2.3, and in clause 16, and in Tables 3, 8 and C.I. Replace Partial Line Down by Partial Line Forward in clause 4, and in subclauses 8.3, 13.1.5, 13.1.6, 13.1

18、.11 e) Replace Substitute Character by Substitute in clause 4, and in subclause 13.1.13, and in Table 3. B Replace Character Position Relative by Character Position Forward in clause 4, and in subclauses 8.1.7, 13.2.3, 14.2.1.3.1, 14.2.1.3.1.1, 14.2.1.3.1.2, 14.2.1.3.1.3, 14.2.1.3.1.4, 14.2.1.3.1.5

19、and 14.2.1.3.1.6 (two occurrences), and in Tables 3, 8 and C.l. 2) Clause 4 Add the following Note at the end of the clause: NOTE - For historical reasons the acronyms of some control functions do not correspond to their names. 3) Subclause 6.6 Reword the first paragraph as follows: The graphic char

20、acter SPACE has a graphical representation consisting of the absence of a graphic symbol. It also indicates a potential line break point (see 14.2.1.3.2). 4) Subclause 6.8.2 In the last sentence of the thirdparagraph, replace the character SPACE is regarded both as a graphic character and as a contr

21、ol function that indicates by the graphic character SPACE indicates. ITU-T Rec. T.416 (1993)Kor.l (1997 E) 1 - ISO/IEC 8613-6 : 1994Kor.l : 1998 (E) 5) Clause 6 Add a new clause 6.9 as follows: 6.9 Implementation dependent features The real effects of presentation features specified by character con

22、tent architecture attribc dependent and not defined in IT-T Rec. T.410-Series I ISO/IEC 8613. IS are implemer ation In interchange, if an originator specifies a particular attribute there is no guarantee that the corresponding feature will be presented correctly by the recipient system. The specific

23、ation of character content attributes is intended to provide capable recipient systems with sufficient information to achieve the correct presentation of corresponding features. Document application profiles may specify additional support requirements for character presentation attributes defined in

24、 this Specification. NOTE - How an implementation represents a particular imaging feature, or an alternative fall-back feature, is a local matter and is out of the scope of this Specification. Some examples are: - use of font selection for achieving some forms of emphasis (e.g. weight, posture, imag

25、e inversion); use of an alternative rendition for representing the blinking feature in printed text; replacement of underlining by a suitable emphasis in those writing systems which do not use a horizontal writing direction; selection of a replacement font when the font specified by the originator i

26、s not available to the recipient system. - - - 6) Clause 8 Remove Note 1 and replace current Note 2 by: NOTE - Document application profiles may define additional restrictions on the use of the character features defined in this clause. 7) Subclause 8.1 Remove the Note. 8) Subclause 8.1.3 Remove the

27、 Note. 9) Subclause 8.1.4 Remove the Note. 10) Subclause 8.1.5 Remove the Noie. 11) Subclause 8.2.2 Remove Note 1, and renumber current Note 2 to I and current Noie 3 io 2. 2 ITU-T Rec. T.416 (1993)/Cor.l (1997 E) ISOlEC 8613-6 : 1994Kor.l : 1998 (E) 12) Subclause 9.2.1 a) The specification of forma

28、tting indicator cannot be altered within the content of a basic component. b) Replace the Note by: character width for each character and the same pairwise kerning for each pair of characters. Replace the last paragraph before the Note by: NOTE - In interchange, a recipient system can take advantage

29、 of this attribute only if it has a character font with the same 13) Subclause 13.1.1 Replace the first paragraph by: A control function which specifies that the active position be moved to the line home position but not be moved in the direction of line progression. 14) Subclause 13.1.3 Replace the

30、 first sentence by: A control function with one optional selective parameter which specifies a subrepertoire of the graphic character repertoire of ISODEC 6937. 15) Subclause 13.1.4 Replace the first sentence by: A control function which specifies that the active position be advanced in the directio

31、n of line progression but not be moved in the direction of the character path. 16) Subclause 13.1.5 Replace the first paragraph by: A control function which specifies either the start of subscript rendition or the end of superscript rendition of graphic characters. 17) Subclause 13.1.6 Replace the f

32、irst paragraph by: A control function which specifies either the start of superscript rendition or the end of subscript rendition of graphic characters. 18) Subclause 13.1.11 Replace the first paragraph by: A control function with one optional selective parameter which specifies either the start or

33、end of a string of graphic characters that are to be imaged in the direction opposite to that of the immediately preceding text (see 7.2.4). 19) Subclause 13.1.12 Replace the first paragraph by: A control function with one optional selective parameter which specifies a reference to a tabulation stop

34、 position in an associated “line layout table” (see 9.1.13). ITU-T Rec. T.416 (1993)/Cor.l(1997 E) 3 ISODEC 8613-6 : 1994Kor.l : 1998 (E) 20) Subclause 13.1.13 Replace the paragraph by: A control function which specifies the occurrence of a character that has been found invalid or in error. 21) Subc

35、lause 13.1.15 Replace fhejrst paragraph by: A control function with one optional numeric parameter which specifies that the active position be moved in the opposite direction to the line progression the number of SMUs specified by the parameter. 22) Subclause 13.1.16 Replace the first pnragraph by:

36、A control function with one optional numeric parameter which specifies that the active position be moved in the direction of line progression the number of SMUs specified by the parameter. 23) Subclause 13.1.17 Replace the paragraph by: This is a category of control functions which specify the desig

37、nation and invocation of graphic character sets. The control functions are defined in ISOLEC 6429 and their use is defined in ISO/IEC 2022. 24) Subclause 13.2.1 Replace the first sentence by: A control function which specifies that the active position be moved, in the direction opposite to the chara

38、cter path, a distance specified by the most recent occurrence of either of the control functions Select Character Spacing (SHS) or Set Character Spacing (SCS), if any, or otherwise by the presentation attribute “character spacing”. 25) Subclause 13.2.2 Replace the first paragraph by: A control funct

39、ion with one optional numeric parameter which specifies that the active position be moved in the opposite direction to the character path the number of SMUs specified by the parameter. 26) Subclause 13.2.3 Replace the first paragraph by: A control function with one optional numeric parameter which s

40、pecifies that the active position be moved in the direction of the character path the number of SMUs specified by the parameter. 27) Subclause 13.2.4 Replace the first sentence by: A control function with one optional selective parameter which is placed at the beginning of a line to specify that the

41、 line shall not be justified. 4 ITU-T Rec. T.416 (1993)/Cor.l(1997 E) ISOBEC 8613-6 : 1994Kor.l : 1998 (E) 28) Subclause 13.3.1 Replace the paragraph by: A control function which specifies a point where a line break may occur when text is formatted (see 14.2.1.3.2). 29) Subclause 13.3.2 Replace the

42、first paragraph by: A control function which specifies a point where no line break may occur when text is formatted (see 14.2.1.3.2). 30) Subclause 13.3.3 Replace the first paragraph by: A control function with one optional selective parameter which specifies either the start or end of passages of t

43、ext which are interchanged one after the other, but which are intended to be presented in parallel with one another (see 7.2.5). 31) Subclause 13.5 Replace the current text by: 13.5 SPACE The graphic character SPACE is significant to the content layout process. It acts as a word delimiter and indica

44、tes a potential line break point except when it is immediately followed by another SPACE or by an occurrence of the control function NBH (No Break Here) (see 13.3.2). The graphic character SPACE specifies that the active position is to be advanced without a graphic symbol being imaged. However, any

45、graphic renditions that are in effect apply also to the graphic character SPACE, e.g. if underlining is in effect, an underline with no graphic symbol would result. Any SPACE graphic characters that follow a non-SPACE character and that precede a line terminator are ignored by the content imaging pr

46、ocess. 32) Subclause 14.2.1.3.1.1 Replace the last paragraph by: If pairwise kerning is performed by the content layout process, it will result in the insertion of a control function Character Position Backward (HPB) or Character Position Forward (HPR) between the two characters involved. 33) Subcla

47、use 14.2.1.3.1.2 Replace the last paragraph by: If first line offset is performed by the content layout process, it will result in the insertion of a control function Character Position Backward (HPB) or Character Position Forward (HFR). 34) Subclause 14.2.1.3.1.3 Replace the last paragraph by: If i

48、temization is performed by the content layout process, it will result in the insertion of a control function Character Position Backward (HFB) or Character Position Forward (HPR) before the text of the item identifier. ITU-T Rec. T.416 (1993)/Cor.l(1997 E) 5 STDsITU-T RECMN T.41b CORR 1-ENGL 1997 48

49、62591 0645509 238 ISODEC 8613-6 : 1994Kor.l : 1998 (E) 35) Subclause 14.2.1.3.1.4 4 Replace “start-aligned” by start-aligned (two occurrences), “end-aligned” by end-aligned (one occurrence), “centred” by centred (one occurrence), “no itemization” by no itemization (one occurrence) and tjustified” by justified (two occurrences). b) Replace the secondparagraph by: If alignment is performed by the content layout process, the line length for alignment is determined to be: Replace the last paragraph by. If the