JEDEC JEP130A-2006 Guidelines for Packing and Labeling of Integrated Circuits in Unit Container Packing (Tubes Trays and Tape and Reel)《多元容器包装中的集成电路包装与标签指南(导管 实验托盘 带 和盘)》.pdf

1、JEDEC PUBLICATION Guidelines for Packing and Labeling of Integrated Circuits in Unit Container Packing (Tubes, Trays, and Tape and Reel) JEP130A (Revision of JEP130, August 1997) FEBRUARY 2006 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that has

2、been prepared, reviewed, and approved through the JEDEC Board of Directors level and subsequently reviewed and approved by the JEDEC legal counsel. JEDEC standards and publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, f

3、acilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for use by those other than JEDEC members, whether the standard is to be used either domestically or internationally. JEDEC standards and publicati

4、ons are adopted without regard to whether or not their adoption may involve patents or articles, materials, or processes. By such action JEDEC does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the JEDEC standards or publications. The in

5、formation included in JEDEC standards and publications represents a sound approach to product specification and application, principally from the solid state device manufacturer viewpoint. Within the JEDEC organization there are procedures whereby a JEDEC standard or publication may be further proce

6、ssed and ultimately become an ANSI standard. No claims to be in conformance with this standard may be made unless all requirements stated in the standard are met. Inquiries, comments, and suggestions relative to the content of this JEDEC standard or publication should be addressed to JEDEC at the ad

7、dress below, or call (703) 907-7559 or www.jedec.org Published by JEDEC Solid State Technology Association 2006 2500 Wilson Boulevard Arlington, VA 22201-3834 This document may be downloaded free of charge; however JEDEC retains the copyright on this material. By downloading this file the individual

8、 agrees not to charge for or resell the resulting material. PRICE: Please refer to the current Catalog of JEDEC Engineering Standards and Publications online at http:/www.jedec.org/Catalog/catalog.cfm Printed in the U.S.A. All rights reserved PLEASE! DONT VIOLATE THE LAW! This document is copyrighte

9、d by JEDEC and may not be reproduced without permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: JEDEC Solid State Technology Association 2500 Wilson Boulevard Arlington, Virginia 22201-3834 or c

10、all (703) 907-7559 JEDEC Publication No. 130A -i- Guidelines for Packing and Labeling of Integrated Circuits in Unit Container Packing (Tubes, Trays, and Tape and Reel) Contents 1 Scope 1 2 Terms and definitions 1 3 Reference documents 2 4 Agreement 2 5 Guidelines 3 5.1 Unit pack container packing 3

11、 5.2 Intermediate packing 3 5.3 Date codes - for Distributors only 4 5.4 Intermediate container Tube, Tray, or Tape and Reel). Date code: Marking on device package that usually indicates device final seal or encapsulation date. PDIP: Plastic Dual-in-line package PLCC: Plastic Leaded Chip Carrier PLC

12、CR: Rectangular PLCC QFN (MLF): Plastic Quad Flat No-lead package (Plastic Micro Lead Frame Package) SON: Plastic Dual Flat No-lead package (Plastic Dual Micro Lead Frame Package) SOIC: Plastic Small Outline Package SSOP: Plastic Shrink Small Outline Package PSOP: Power Small Outline Plastic Package

13、 TSSOP: Plastic Thin Small Outline Package MSOP: Plastic Mini Small Outline Package QSOP: Plastic Quad Small Outline Package PQCC: Plastic Leadless Package PQFP: Plastic Quad Flat pack Package PBGA: Plastic Ball grid Array Package JEDEC Publication No. 130A Page 2 2 Terms and definitions (contd) CDI

14、P: Ceramic Dual-In-Line (Metal Seal) Package GDIP: Ceramic Dual-In-line (Glass Seal Package) CPGA: Ceramic Pin Grid Array Package CLCC: Ceramic Leadless Chip Carrier 3 Reference documents The following documents are related reference sources. CEA 556, Outer Shipping Container Bar Code Label Standard

15、 EIA 541, Packaging Material Standards for ESD Sensitive Items CEA 624, Product Package Bar Code label Standard for Non-Retail Applications JEP95, JEDEC Registered And Standard Outlines For Solid State And Related Products JESD30, Descriptive Designation System for Semiconductor-Device Packages 4 Ag

16、reement The formal legal agreement between the Manufacturer and the Distributor may delete, change, or add to the criteria defined by this publication. However these deletions, changes, or additions shall not impact the quality, reliability, or traceability of the product. JEDEC Publication No. 130A

17、 Page 3 5 Guidelines 5.1 Unit pack container packing a) Unit Pack Container configurations should be in accordance with existing industry practices; however, the specification for overall tube length should be 22 inches (56 cm.) maximum, excluding toppers or other cushioning materials inserted in th

18、e tube. b) Components should be oriented in the same direction, in all Unit Pack Containers. c) Partial Unit Pack Containers under the AUP of $5.00 (Distributor price) may not be accepted. All distributors should order all semiconductors in full Unit Pack Container quantities for parts less than $5.

19、00 AUP. d) When distributors return parts, those same parts that were originally shipped in full Unit Pack Container quantities should be in full quantities. Quality defects may be excluded. e) Unit Pack Containers are not required to be barcode labeled (as an industry practice or guideline), provid

20、ed they are contained inside of a barcode labeled intermediate product package (bag, box, or reel). 5.2 Intermediate packing a) Intermediate container packing process should be designed to eliminate the presence of partial quantities. b) Intermediate packing, which includes boxes, bags, reels, or ot

21、her intermediate containers, should have an overall length (outer dimensions) of 23.5 inches (60 cm.) maximum. (Tube Bags may be longer than 23.5 inches but must be folded to fit.) 5.3 Date codes - for distributors only a) Date codes on all commercial products should be 12 months old or less when sh

22、ipped by the manufacturer, excluding end of life product. b) As a preferred methodology, there should be no more than one date code per unit pack container. If this is not possible, then there should be no more than two (2) date codes in one unit pack container per intermediate packing container. If

23、 two (2) date codes are used, the unit pack container should be clearly identified as having mixed date codes and labels must indicate the quantity for each date code. c) If possible, there should be no more than three date codes per sealed intermediate container. The label on the intermediate conta

24、iner should list all date codes and quantities by date code. JEDEC Publication No. 130A Page 4 5 Guidelines (contd) 5.4 Intermediate container and shipping labels This standard reflects current EIA industry bar code specifications (Ref.: CEA 556, CEA 624), and should be used as an example when desig

25、ning a 1-Dimensional bar code or 2-Dimensional label. Intermediate Container Label Mandatory Fields: The following data fields constitute a minimum requirement for bar coding applications. a) Part Number (Customer) I. Data Identifier: P II. Fixed Length? No III. Ex: P1234567 b) Date code I. Data Ide

26、ntifier: 9D II. Fixed Length? Yes (4 characters) III. Ex: 9D9340 c) Quantity I. Data Identifier: Q II. Fixed Length? No III. Ex: Q2000 Optional Fields: Inclusion of optional data fields should be agreed upon between trading partners. (Example: traceability codes). d) Traceability Codes (optional) I.

27、 Data Identifier: IT II. Fixed Length? No III. Ex: 1TMA12345678 JEDEC Publication No. 130A Page 5 5.4 Intermediate container and shipping labels (contd) 3S Shipping Label Mandatory Fields: The following data fields constitute a minimum requirement for bar coding applications. a). Package ID I. Data

28、identifier: 3S II Fixed Length? No III Make up is UCC Vendor ID QFN, SON, SSOP, PSOP, TSSOP, MSOP, QSOP, PQCC, PQFP, PBGA, GDIP, CPGA, CLCC. 1 Redefined “intermediate container” and changed term to “intermediate package container”. 1 Redefined “unit container” and changed term to “unit package conta

29、iner”. 1 Remover term and definition for “rail” 2 Added reference documents, JEP95 and JESD30 2 Added new clause 4 “Agreement” 3 Changed clause 4 to clause 5 and renumbered accordingly. 3 Generally, in the new clause 5, the term “Tube” was changed to “Unit Pack”. 5 Subclause 4.4 was removed. 6 Subcl

30、ause 4.6 was removed. 7 Table 1 was deleted. Standard Improvement Form JEDEC JEP130A The purpose of this form is to provide the Technical Committees of JEDEC with input from the industry regarding usage of the subject standard. Individuals or companies are invited to submit comments to JEDEC. All co

31、mments will be collected and dispersed to the appropriate committee(s). If you can provide input, please complete this form and return to: JEDEC Attn: Publications Department 2500 Wilson Blvd. Suite 220 Arlington, VA 22201-3834 Fax: 703.907.7583 1. I recommend changes to the following: Requirement, clause number Test method number Clause number The referenced clause number has proven to be: Unclear Too Rigid In Error Other 2. Recommendations for correction: 3. Other suggestions for document improvement: Submitted by Name: Phone: Company: E-mail: Address: City/State/Zip: Date: