JEDEC JESD236-C-1986 Color Coding of Discrete Semiconductor Devices.pdf

1、JEDEC STANDARD Color Coding of Discrete Semiconductor Devices JESD236-C (Revision of EIA-236-B) MARCH 1986; Reaffirmed November 1999, September 2009 JEDEC SOLID STATE TECHNOLOGY ASSOCIATION NOTICE JEDEC standards and publications contain material that has been prepared, reviewed, and approved throug

2、h the JEDEC Board of Directors level and subsequently reviewed and approved by the JEDEC legal counsel. JEDEC standards and publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improveme

3、nt of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for use by those other than JEDEC members, whether the standard is to be used either domestically or internationally. JEDEC standards and publications are adopted without regard to whether or

4、 not their adoption may involve patents or articles, materials, or processes. By such action JEDEC does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the JEDEC standards or publications. The information included in JEDEC standards and pu

5、blications represents a sound approach to product specification and application, principally from the solid state device manufacturer viewpoint. Within the JEDEC organization there are procedures whereby a JEDEC standard or publication may be further processed and ultimately become an ANSI standard.

6、 No claims to be in conformance with this standard may be made unless all requirements stated in the standard are met. Inquiries, comments, and suggestions relative to the content of this JEDEC standard or publication should be addressed to JEDEC at the address below, or call (703) 907-7559 or www.j

7、edec.org Published by JEDEC Solid State Technology Association 2009 3103 North 10th Street Suite 240 South Arlington, VA 22201-2107 This document may be downloaded free of charge; however JEDEC retains the copyright on this material. By downloading this file the individual agrees not to charge for o

8、r resell the resulting material. PRICE: Please refer to the current Catalog of JEDEC Engineering Standards and Publications online at http:/www.jedec.org/Catalog/catalog.cfm Printed in the U.S.A. All rights reserved PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by JEDEC and may not be r

9、eproduced without permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: JEDEC Solid State Technology Association 3103 North 10th Street Suite 240 South Arlington, VA 22201-2107 or call (703) 907-75

10、59 JEDEC Standard No. 236-C Page 1 COLOR CODING OF DISCRETE SEMICONDUCTOR DEVICES (From EIA Standards Proposal No.1819, formulated under the cognizance of the JC-10 Committee on Terms, Definitions, and Symbols.) 1 Scope This Standard details the rules to be followed if color coding is used to identi

11、fy JEDEC-assigned type numbers or for cathode identification of discrete semiconductor devices. The use of color coding shall be guided by the following general principles: If an end color marking coincides with the device body color, or if the color coding is otherwise not sufficiently distinctive,

12、 color coding shall not be used. This does not preclude the use of a single color mark to identify a cathode in accordance with clause5. 2 Prefix identification The prefix identification consisting of a first number symbol and the letter “N“ shall not be indicated in the color coding. 3 Type-number

13、coding The sequence number consisting of a two-, three-, or four-digit number after the letter “N“ shall be color coded as follows: 3.1 Two-digit sequence numbers shall consist of a first black mark and the sequence number in second and third marks of the colors indicated in Table 1. If a suffix let

14、ter is required, it shall be indicated with a fourth color mark as indicated in Table 1. 3.2 Three-digit sequence numbers shall consist of the sequence number in the first, second, and third marks of the colors indicated in Table 1. If a suffix letter is required, it shall be indicated with a fourth

15、 color mark as indicated in Table 1. 3.3 Four-digit sequence numbers shall consist of the sequence number in four marks of colors indicated in Table 1 with a fifth black mark. If a suffix letter is required, it shall be indicated as the fifth color mark and shall replace the black mark. JEDEC Standa

16、rd No. 236-C Page 2 4 Color marks 4.1 On cylindrical bodies the color marks shall be circumferential and unbroken bands. 4.2 Color bands shall be not less than 1/64“ (0.4 mm) wide and separated from each other by the same minimum distance. If other color marks are used, their minimum dimension shall

17、 be increased to ensure identification of the colors. 4.3 The sequence numbers of the type numbers and suffix letter shall be indicated by the colors in Table 1. TABLE 1 Number Color Suffix Letter 0 Black Not applicable 1 Brown A 2 Red B 3 Orange C 4 Yellow D 5 Green E 6 Blue F 7 Violet G 8 Gray H 9

18、 White J 4.4 The colors used shall conform to the latest issue of Recommended Standard EIA-359 for “Colors for Color Identification and Coding”. 4.5 If the body color of a device is the same as that of a mark, the mark may be indicated by a blank space between adjacent marks. The width of the blank

19、space shall be equal to the mark width plus the width of its adjacent separations. If this marking is not deemed sufficiently distinctive, or if the particular mark appears at the beginning or the end of the number, color coding shall not be used. JEDEC Standard No. 236-C Page 3 5 Cathode identifica

20、tion and reading sequence 5.1 On cylindrical bodies the bands shall clearly be grouped closer to one end of the device and shall be read starting with the band closest to the end of the device. 5.2 On cylindrical diode and rectifier devices for which it is necessary to indicate polarity, the bands s

21、hall be closer to the cathode end. If color coding is not used for type-number identification, a single band may be placed at the cathode end to identify that electrode. 5.3 For cylindrical devices on which it is difficult to group bands closer to one end than the other, the first band shall be doub

22、le width. JEDEC Standard No. 236-C Page 4 This page intentionally left blank. Standard Improvement Form JESD236-C The purpose of this form is to provide the Technical Committees of JEDEC with input from the industry regarding usage of the subject standard. Individuals or companies are invited to sub

23、mit comments to JEDEC. All comments will be collected and dispersed to the appropriate committee(s). If you can provide input, please complete this form and return to: JEDEC Attn: Publications Department 3103 North 10thStreet Suite 240 South Arlington, VA 22201-2107 Fax: 703.907.7583 1. I recommend

24、changes to the following: Requirement, clause number Test method number Clause number The referenced clause number has proven to be: Unclear Too Rigid In Error Other 2. Recommendations for correction: 3. Other suggestions for document improvement: Submitted by Name: Phone: Company: E-mail: Address: City/State/Zip: Date: