KS P ISO 7176-19-2012 Wheelchairs－Part 19：Wheeled mobility devices for use as seats in motor vehicles《轮椅 第19部分 用作汽车座椅的有轮易动性装置》.pdf

1、 KSKSKSKSKSKSKSK KSKSKS KSKSK KSKS KSK KS KS P ISO 7176 19 19： KS P ISO 7176 19:2012 2012 12 28 http:/www.kats.go.krKS P ISO 7176 19:2012 : ( ) ( ) ( ) : (http:/www.standard.go.kr) ： ：2003 12 13 ：2012 12 28 2012-0802 ： ： ( 02-509-7278) (http:/www.kats.go.kr). 10 5 , . KS P ISO 7176 19:2012 i ii 1 1

2、2 1 3 .1 4 .6 4.1 6 4.2 .7 5 .10 5.1 .10 5.2 12 5.3 4 14 5.4 .14 6 , , , 14 6.1 .14 6.2 15 6.3 15 7 .18 7.1 18 7.2 .18 7.3 , .18 A( ) .20 B( ) 4 .28 C( ) 4 30 D( ) 33 E( ) 38 F( ) (UDIG) 39 KS P ISO 7176 19:2012 ii 2008 2 ISO 7176 19, Wheelchairs Part 19： Wheeled mobility devices for use as seats in

3、 motor vehicles . KS P ISO 7176 19:2012 19： Wheelchairs Part 19： Wheeled mobility devices for use as seats in motor vehicles 1 22 kg . , , , . . 2 . . ( ) . KS B ISO 3795, KS P ISO 7176 5, 5： , , KS P ISO 7176 15, 15： , , KS P ISO 7176 22, 22： KS P ISO 7176 26, 26： KS P ISO 10542 1, 1： KS P ISO 1054

4、2 2, 2： 4 KS R ISO 6487, FMVSS 209:2004, Standard No. 209, Seat belt assemblies. Federal Motor Vehicle Safety Standards, 49 CFR 571.209, 1 October, 2004 ECE Regulation 16, Uniform provisions concerning the approval of safety belts and restraint systems for adult occupants of power-driven vehicles, R

5、evision 3, Amendment 2, 16 August 1993 3 . KS P ISO 7176 19:2012 2 3.1 (add-on components) / . . 3.2 (adult) 43 kg 3.3 (anchor point) , , , ( ) 3.4 (anchorage) , , 3.5 (Anthropomorphic Test Device) ATD 3.6 (belt) , . 3.7 (child) 22 kg 43 kg 3.8 (clamp-type tiedown) / 3.9 (docking-type tiedown) (dock

6、ing-type securement) . . 3.10 (docking tiedown device) (docking securement device) KS P ISO 7176 19:2012 3 . 3.11 (excursion) ATD . 3.12 (forward-facing) 10 3.13 4 (four-point tiedown) 4 4 3.14 4 (four-point strap-type tiedown) 4 4 3.15 H (H-points) (ATD) , ATD . 3.16 (head restraint) 3.17 (impact s

7、imulator) 3.18 (impact sled) 3.19 (occupant restraint) , 3.20 (pelvic-belt restraint) (lap-belt restraint) 1 KS P ISO 7176 19:2012 4 1 2 . 1 3 3.21 P (point P) 100 mm, 200 mm ( 0.5 kg) 2 ： mm 1 100 mm P P a b 2 P , KS P ISO 7176 19:2012 5 3.22 (postural support device) . 3.23 power(ed) 3.24 (securem

8、ent points) 3.25 (shoulder-belt restraint) (upper torso restraint) 1 3.26 (strap) , . 3.27 (surrogate tiedown) 3.28 3 (three-point belt restraint) 3 ( ) 3 1 3.29 (tilt seating) 3.30 (universal docking interface geometry) UDIG , , KS P ISO 7176 19:2012 6 3.31 (UDIG adaptor) F UDIG 3.32 (wheelchair fo

9、otprint) 3.33 (wheelchair ground plane) 2 3.34 (wheelchair reference plane) 2 3.35 (wheelchair-tiedown) (wheelchair securement) - . 3.36 (wheelchair tiedown adaptor) (wheelchair securement adaptor) 3.37 (Wheelchair Tiedown and Occupant-Restraint System) WTORS , 4 4.1 4.1.1 KS P ISO 10542 2 4 . B 5.

10、2 2 4 . . KS P ISO 7176 19:2012 7 4.1.2 / / F 5. . 4.2 4.2.1 - A ATD - . a) 3 3075 . b) 1 . 1 3 ( ) . 2 , 25 mm . 1 ： mm ATD a b b6 100 100 10 100 100 100 100 200 200 200 200 a A.1 b , 25 mm . KS P ISO 7176 19:2012 8 . 3 A ATD 4.2.2 - A ATD - . a) 4 A ATD 100 mm . b) A ATD . c) 3 ATD / . d) 4 . , 25

11、 mm . KS P ISO 7176 19:2012 9 ： mm 1 2 ( ATD ) 55 . ATD 2 . 4 2 ATD ： mm ATD a 6 275 10 325 353 406 432 a A.1 KS P ISO 7176 19:2012 10 3 ATD / ： mm ATD aATD 6 150 10 150 200 200 a A.1 4 ： mm ATD a b b6 250 150 10 250 150 250 150 300 200 300 200 a A.1 b , 25 mm . 4.2.3 D . 6.2 . - . . . . 50 mm . 5 5

12、.1 , , , 5 KS P ISO 7176 19:2012 11 6 , , ECE R 16 / FMVSS 209 . KS B ISO 3795 100 mm/min . 5 ECE Regulation No. 16 ECE Regulation No. 16 6.2.1.1 6.2.1.2 7.2 6.2.1.4 7.5.4 6.2.2.1 6.2.2.2 / 7.8.2 6.2.2.3 7.5.3 6.2.2.4 7.7 6.2.3.2 6.2.3.4 7.5.6 6.2.5 7.2, 7.6.1 7.6.4 6.2.6 7.2, 7.9.2 6.3.1 6.3.2 7.4.

13、1.1, 7.4.2 6.3.3 7.4.1, 7.4.2 6.3.4 7.4.1.6, 7.4.2, 7.5 6 FMVSS 209 FMVSS 209 S4.1(d) S4.1(e) S4.1(h) S4.2(a) S5.1(a) S4.2(b) S5.1(b) S4.2(c) S5.1(c) S4.2(d) S5.1(d), S5.3(c) S4.2(d) S5.1(d) S4.2(e) S5.1(e) S4.2(h) S5.1(h) S4.3(a) S5.2(a) S4.3(b) S5.2(b) S4.3(d) S5.2(d) S4.3(e) S5.2(e) KS P ISO 7176

14、 19:2012 12 6 FMVSS 209 ( ) ECE Regulation No. 16 S4.3(f) S5.2(f) S4.3(g) S5.2(g) S4.3(i) S5.2(i) S4.3(j) S5.2(j) S4.3(k) S5.2(k), S4.4 S4.4(a) S5.3(a) S4.4(b) 3 S5.3(b) 5.2 a) b) . a) KS P ISO 10542 2 4 A , 5.2.1 5.2.2 . b) A , 5.2.1 5.2.2 . 5.2.1 a) ATD 7 . b) P ( 7 ). Xknee/Xwc1.1 . c) 1) . 2) (

15、ATD ). KS P ISO 7176 19:2012 13 7 ： mm 6 ATD 10 ATD ATD ATD P Xwc150 175 200 200 ATD Xknee300 325 375 375 ATD XheadF450 500 550 650 ATD XheadR 350 400 400 400 Xwc： t0 P P P Xknee： t0 ATD - XheadF： t0 ATD XheadR： t0 ATD P P A.4.11 . 5.2.2 a) 45 ATD ATD . b) . c) 100 g , , . d) 2 mm . e) (backup system) . . f) . g) ATD ATD . h) . i) ATD H 20 % . KS P ISO 7176 19:2012 14 j) , WTORS . 5.3 4 C 4 a) 10 C.2 . , b) 10 . . 5.4 D , . 6 , , , KS P ISO 7176 15 6.1 6.3 . 6.1 a) / 5 4 . 12 mm , 10 %20 % , 1 m . b) 4 , / . c)