KS W ISO 9738-2008 Aerospace－Turnbarrels for aircraft control wire rope－Dimensions and loads《航空航天 飞行器控制金属丝绳用转筒 尺寸及荷载》.pdf

1、 KSKSKSKS KSKSKSK KSKSKS KSKSK KSKS KSK KS KS W ISO 9738 KS W ISO 9738:2008 2008 5 26 http:/www.kats.go.krKS W ISO 9738:2008 ： ( ) ( ) () ( ) : (http:/www.standard.go.kr) ： ：2003 12 30 ：2008 5 26 20080267 ： ： ( 025097270) (http:/www.kats.go.kr). 10 5 , . KS W ISO 9738:2008 Aerospace Turnbarrels, for

2、 aircraft control wire rope Dimensions and loads 2000 ISO 9738, Aerospace Turnbarrels, for aircraft control wire rope Dimensions and loads . 1 , , . 2 . . ( ) . KS A ISO 13715, KS W 1134, KS W 1551, MJ 2： KS W ISO 2020 1, 1： KS W ISO 9761, KS W ISO 10955, ISO 426 2： 1983, Wrought copper-zinc alloys

3、Chemical composition and forms of wrought productsPart 2： Leaded copper-zinc alloys ISO 1637： 1987, Wrought copper and copper alloys rod and bar Technical conditions of delivery EN 2101, Aerospace series Chromic acid anodizing of aluminium and wrought aluminium alloys EN 2133： 1998, Aerospace series

4、 Cadmium plating of steels with specified tensile strength1 450 MPa, copper, copper alloys and nickel alloys EN 2284, Aerospace series Sulphuric acid anodizing of aluminium and wrought aluminium alloys EN 2704：1), Aerospace series Aluminium alloy 2024-T3511 Bars a 75 mm2)EN 3487：1), Aerospace series

5、 Steel FE-PA 3601 Softened 500 MPaRm700 MPa Bars for 1) 2) AECMA(European Association of Aerospace Industries) KS W ISO 9738:2008 2 machining De100 mm2)SAE AMS 2431/6A, Peening Media, Glass Shot SAE AMS 4339, Aluminium Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu 1.5 Mg 0.60 Mn, Solution Heat

6、Treated, Cold Worked, and Artificially Aged SAE AMS 5635D, Steel, Corrosion Resistant, Bars, Wire and Forgings 18Cr 9Ni 0.21Pb Free-Machining, Solution Heat Treated SAE AMS 6370K, Steel Bars, Forgings, and Rings 0.95Cr 0.20Mo(0.28 0.33C) MIL A 8625, Anodic coatings, for aluminium and aluminium alloy

7、s QQ P 416F, Plating, Cadmium(Electrodeposited) 3 , , , , 1 1 . 4 A： ( A .) B： ISO 426 2 ISO 1637 ( A .) C： ( A .) D： ( A .) 5 ： KS W 1134 ( P) (peening： G)( A .) ： ( N) ( G)( A .) ： ( A)( A .) ： ( A .) 6 . KS W ISO 9738 A 06 S P KS (4. ) ( 1 ) ( 1 ) (5. ) 7 1 . , 6. . . KS W ISO 9738:2008 3 8 KS W

8、ISO 10955 . ： mm, ： m a b c d e f 0.4 mm 0.8 mm g h KS W ISO 9761 ( 04 .) 1 KS A ISO 13715 KS W ISO 9738:2008 4 1 ： mm aD4L1P D1h11 D2 10+D3 03.0 0.5L2L30.25L40.8 bg/ ckN c04 MJ40.74H6H 7 5.5 5.2 4.18 4.78 S 44 20 4 4.36 4.45 5.3 2.15 1.6 S5425 9.4 05 MJ50.84H6H 9 6.8 6.2 5.2 5.8L84405 5.29 5.4914.2

9、 4.45 2.4 S 64 30 18.3 06 MJ61 4H6H 11 8.5 7.5 6.24 7.04L 100 486 6.16 6.3628 8.9 3.2 S 74 35 26.3 07 MJ71 4H6H 12 9.8 8.8 7.24 8.04L 114 5587 7.16 7.3640.1 12.45 4 08 MJ81 4H6H 13 11.5 10.5 8.24 9.04 S 85 40 8 8.16 8.36 41.4 18.6 4.8 10 MJ101.25 4H6H 15 13.5 12 10.28 11.08 S 10 9.83 10.04 69 24.9 5

10、.6 12 MJ121.25 4H6H 17 15.8 14 12.29 13.09 S110 521012 11.83 12.04 89.3 31.2 6.4 aKS W 1551 . b cKS W ISO 2020 1 . KS W ISO 9738:2008 5 A ( ) . . A.1 A.2 . A.1 (passivation) ISO 8074 (KS W 1134) A EN 3487 (peening) SAE AMS 2431/6A B ISO 426 2 ISO 1637 (peening) SAE AMS 2431/6A C EN 2704 EN 2101 EN 2

11、284 D EN 2207 EN 2133 A.2 (passivation) ISO 8074 (KS W 1134) A SAE AMS 5635 (peening) SAE AMS 2431/6A B ISO 426 2 ISO 1637 (peening) SAE AMS 2431/6A C SAE AMS 4339 MIL A 8625 II, 1 D SAE AMS 6370 QQ P 416 II, 2 KS W ISO 9738： 2008 6 KS W ISO 9738:2008 , . 1 1.1 2000 ISO 9738 . 1.2 KS ISO . , , 2000

12、ISO TC 20 SC 12 . A . 2 , , . . 3 02 300 0108 02 3158 2191 042 868 6210 042 860 2506 02 450 3548 02 300 0136 02 300 0167 135513 7017 (02)60094114 (02)600948878 http:/ Korean Agency for Technology and Standards http:/www.kats.go.kr KS W ISO 9738:2008KSKSKS SKSKS KSKS SKS KS SKS KSKS SKSKS KSKSKS Aerospace Turnbarrels, for aircraft control wire rope Dimensions and loads ICS 49.035