1、 Standard Practice Inspection of Lining Application in Steel and Concrete Equipment This NACE International standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. Its acceptance does not in any respect preclude anyone, whether he or sh
2、e has adopted the standard or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not in conformance with this standard. Nothing contained in this NACE International standard is to be construed as granting any right, by implication or otherwise, to manufacture
3、, sell, or use in connection with any method, apparatus, or product covered by Letters Patent, or as indemnifying or protecting anyone against liability for infringement of Letters Patent. This standard represents minimum requirements and should in no way be interpreted as a restriction on the use o
4、f better procedures or materials. Neither is this standard intended to apply in all cases relating to the subject. Unpredictable circumstances may negate the usefulness of this standard in specific instances. NACE International assumes no responsibility for the interpretation or use of this standard
5、 by other parties and accepts responsibility for only those official NACE International interpretations issued by NACE International in accordance with its governing procedures and policies which preclude the issuance of interpretations by individual volunteers. Users of this NACE International stan
6、dard are responsible for reviewing appropriate health, safety, environmental, and regulatory documents and for determining their applicability in relation to this standard prior to its use. This NACE International standard may not necessarily address all potential health and safety problems or envir
7、onmental hazards associated with the use of materials, equipment, and/or operations detailed or referred to within this standard. Users of this NACE International standard are also responsible for establishing appropriate health, safety, and environmental protection practices, in consultation with a
8、ppropriate regulatory authorities if necessary, to achieve compliance with any existing applicable regulatory requirements prior to the use of this standard. CAUTIONARY NOTICE: NACE International standards are subject to periodic review, and may be revised or withdrawn at any time in accordance with
9、 NACE technical committee procedures. NACE International requires that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of initial publication and subsequently from the date of each reaffirmation or revision. The user is cautioned to obtain the la
10、test edition. Purchasers of NACE International standards may receive current information on all standards and other NACE International publications by contacting the NACE International FirstService Department, 1440 South Creek Dr., Houston, Texas 77084-4906 (telephone +1 281-228-6200). Revised 2011-
11、28-10 Reaffirmed 2004-03-31 Revised October 1994 Approved November 1998 NACE International 1440 South Creek Dr. Houston, TX 77084-4906 +1 281-228-6200 ISBN 1-57590-180-3 2011, NACE International NACE SP0288-2011 (formerly RP0288) Item No. 21039 SP0288-2011 NACE International i _ Foreword Inspection
12、is an integral part of the lining application process. The purpose of inspection is to verify compliance to the lining application specifications and work procedures, not to question the integrity of the lining applicator. Many lining applicators perform their own inspection or hire an independent i
13、nspection agency. The NACE International Coating Inspector Training and Certification Program provides exposure to knowledge and skills pertaining to inspection of lining application. The intent of this NACE standard is to provide appropriate inspection requirements to verify compliance to a lining
14、application specification. It is not intended to address the selection of the lining material(s) or to specify surface preparation and lining application requirements. This standard is intended for use by facility owners and their representatives, lining applicators, lining material suppliers, and i
15、nspectors involved with the inspection of lining application in steel and concrete equipment such as tanks, vessels, sumps, and basins. For further information on linings for concrete, refer to NACE No. 6/SSPC(1)-SP 131 and NACE Publication 02203/ICRI(2) Technical Guideline 03741/SSPC-TR 5.2 For fur
16、ther information about selecting and specifying surface preparation methods for concrete before application of linings, refer to ICRI Technical Guideline 03732.3 For further information on the design, installation, and inspection of linings, refer to NACE No. 10/SSPC-PA 64 and NACE No. 11/SSPC-PA 8.
17、5 This standard was originally prepared in 1988 by NACE International Task Group (TG) T-6-2, “Inspection of Linings on Steel and Concrete.” It was revised in 1994 by TG T-6-4, “Review of NACE Standard RP0288-88.” It was reaffirmed in 2004 by Specific Technology Group (STG) 03, “Coatings and Linings,
18、 ProtectiveImmersion and Buried Service,” and revised in 2011 by TG 448, “Review and Revise as Necessary NACE Standard RP0288-2004.” This standard is issued by NACE International under the auspices of STG 03. In NACE standards, the terms shall, must, should, and may are used in accordance with the d
19、efinitions of these terms in the NACE Publications Style Manual. The terms shall and must are used to state a requirement, and are considered mandatory. The term should is used to state something good and is recommended, but is not considered mandatory. The term may is used to state something consid
20、ered optional. _ (1) The Society for Protective Coatings (SSPC), 40 24th Street, 6th Floor, Pittsburgh, PA 15222-4656. (2) International Concrete Repair Institute (ICRI), 10600 West Higgins Road, Suite 607, Rosemont, IL 60018. SP0288-2011 ii NACE International _ NACE International Standard Practice
21、Inspection of Lining in Steel and Concrete Equipment Contents 1. General 1 2. Prejob Conference 1 3. Inspection Equipment 2 4. Inspection Requirements . 3 References 4 Bibliography 5 _ SP0288-2011 NACE International 1 _ Section 1: General 1.1 This standard practice provides inspection requirements t
22、o verify compliance to a specification for application of a lining in steel or concrete equipment such as tanks, vessels, sumps, and basins. 1.1.1 This standard is applicable to the application of a new or replacement lining, but is not applicable to the routine inspection of an existing lining. 1.1
23、.2 This standard does not address the selection of the lining material(s) or specify surface preparation and lining application requirements. 1.1.3 This standard does not apply to inspection of exterior coatings on steel or concrete such as atmospheric coatings or external coatings on pipelines or o
24、ther buried or submerged structures. 1.2 Successful lining application is usually the result of a well-prepared lining application specification, properly selected high-quality lining materials, a competent, experienced, knowledgeable lining applicator, and an inspector knowledgeable, and preferably
25、 certified, in lining inspection procedures. Adherence to a well-prepared lining application specification that clearly details industry-accepted requirements and procedures for quality lining application should result in a satisfactory application. The inspector relies on a well-prepared lining app
26、lication specification, which should include methods, specification standards, and acceptance criteria. 1.3 Specifications should be written with the purpose of designating materials and methods that result in high-quality linings appropriate for the user. Attention must be given to relevant details
27、 in a lining application specification. The specification should refer to industry standards whenever possible to minimize confusion or disputes over methodology and to reflect the latest technology that satisfies engineering and design principles for a particular application and environment. The sp
28、ecifications should include the acceptance criteria for the owner/user. 1.4 Inspectors shall have previously performed the functions outlined in this standard and be proficient in the use of inspection equipment. When required, inspectors shall provide necessary documentation and evidence demonstrat
29、ing suitable qualifications. 1.5 The inspector shall maintain a detailed report that outlines observations and measurements of surface preparation, ambient conditions, mixing techniques, application procedures, curing, final inspection, and other information requested at the prejob conference. 1.6 W
30、hen agreed to by the owner, an inspector shall have the authority to suspend lining application work if the work being performed is not in accordance with the lining application specification. Inspector responsibility and authority shall be agreed on by the owner and the contractor. _ Section 2: Pre
31、job Conference 2.1 A prejob conference shall be arranged by the owner and shall be attended by representatives of the owner, lining applicator, and the inspector. 2.2 The parties shall review the specification, procedures, latest lining material manufacturers data sheets, and inspection standards, a
32、nd shall define details of the lining application, review safety practices, and resolve any ambiguities or conflicts. 2.3 All actions that are taken and agreed upon at the prejob conference shall be documented. 2.4 The following items shall be reviewed at the prejob conference: 2.4.1 Acceptable leve
33、ls and methods or procedures for determining moisture content, alkalinity, and cure time required for concrete surfaces for the lining being applied; SP0288-2011 2 NACE International 2.4.2 Acceptable methods for repairing concrete defects such as laitance, bug holes, rock pockets, fins, and structur
34、al cracks, and acceptable methods for treating construction and expansion joints; 2.4.3 Acceptable methods for the removal of curing membranes and release agents; 2.4.4 Degree of surface preparation required for welds, attachments, and surface imperfections, including those illustrated in NACE SP017
35、86 (see Section 4); 2.4.5 Degree of surface cleanliness and depth of surface profile specified, and the agreed-upon standard(s) to be used for the verification of these factors; 2.4.6 Acceptable methods of removing dust and abrasive and the test procedure for verifying degree of surface cleanliness;
36、 2.4.7 Lining material designation(s), including the number of coats to be applied, and method of lining application; 2.4.8 Method of inspection for discontinuities and, if other than a holiday-free lining application is required, the number of allowable holidays or discontinuities and acceptable ma
37、rking materials for highlighting discontinuities; 2.4.9 Acceptable lining repair procedures as supplied by the lining material manufacturer; 2.4.10 The nominal, minimum, and maximum dry film thickness (DFT) to be obtained for each coat, the final cured lining DFT, and the agreed-upon instrument to b
38、e used to measure the DFT; 2.4.11 Number and frequency of DFT measurements to be taken; 2.4.12 Procedure for verifying the degree of cure of the lining; 2.4.13 Requirements for proper ventilation of solvent fumes and drying time between coats; 2.4.14 Work sequence and scheduling, including estimated
39、 interim and final completion dates; 2.4.15 Inspection points in the project beyond which work shall not progress until inspection has been completed and the work has been accepted; 2.4.16 Responsible contact personnel of all parties; 2.4.17 The extent of documentation, job control records, and numb
40、er and distribution of copies required of the inspector; 2.4.18 Inspection instrument calibration procedures; and 2.4.19 The use of destructive inspection instruments. _ Section 3: Inspection Equipment 3.1 Inspection equipment commonly used by the inspector for inspecting lining application includes
41、 the following: 3.1.1 Psychrometer (sling or automatic fan type); 3.1.2 National Weather Service(3) relative humidity-psychrometric tables; 3.1.3 Surface thermometer; 3.1.4 Hypodermic needle abrasive blasting air pressure gauge; 3.1.5 Surface cleanliness standards (written specifications, visual com
42、parators, and/or panels); (3) National Oceanic and Atmospheric Administration, National Weather Service, 1325 East West Highway, Silver Spring, MD 20910. SP0288-2011 NACE International 3 3.1.6 Weld preparation standard and replica; 3.1.7 Surface profile replica tape or comparator; 3.1.8 pH paper; 3.
43、1.9 Wet film gauge; 3.1.10 DFT gauge (nondestructive) and calibration standards; 3.1.11 DFT gauge (destructive), (e.g., Tooke gauge); 3.1.12 Holiday detector (low- or high-voltage); 3.1.13 Magnifying glass (10X); and 3.1.14 Moisture meter. 3.2 Inspection equipment shall be calibrated before, during,
44、 and after use when applicable. The frequency of calibration shall be as specified in the lining application specification. 3.3 Inspection equipment that is destructive or detrimental to the integrity of an applied lining shall not be used for routine inspection. If a destructive test is necessary t
45、o verify degree of surface preparation, number of coats applied, adhesion, or total DFT achieved, the damaged area resulting from the test shall be repaired in accordance with procedures agreed upon during the prejob conference and as specified in the lining application specification. _ Section 4: I
46、nspection Requirements 4.1 Surface Preparation 4.1.1 The abrasive shall be examined periodically for cleanliness and proper grade size. 4.1.2 The cleanliness of blasting air at the nozzle shall be determined in accordance with ASTM(4) D42857 or other applicable standards. 4.1.3. The pressure achieve
47、d at the blast nozzle shall be measured. 4.1.4 The surface temperature of the substrate to be blasted and lined shall be verified to be a minimum of 3 C (5 F) above the dew point or at the temperature determined in the prejob conference in accordance with ASTM E337.8 4.1.5 All steel surfaces to be l
48、ined shall be inspected immediately prior to the application of the first coat to verify compliance with the specified degree of surface cleanliness and surface profile in accordance with NACE No. 1/SSPC-SP 5,9 NACE No. 2/SSPC-SP 10,10 NACE No. 3/SSPC-SP 6,11 NACE No. 4/SSPC-SP 7,12 NACE Standard RP0287,13 SS
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1