NAVISTAR CEMS A-0 PART I SEC A-2014 VOID - Chemical Composition of Standard Steels - Part I Section A - North American Steels (Includes Appendix February 2012).pdf

1、 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2014 by Navistar, Inc. FEBRUARY 2014 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPE

2、CIFICATION) NUMBER: CEMS A-0, PART I, SEC. A TITLE: Chemical Composition of Standard Steels Part I, Section A North American Steels CURRENT ISSUE DATE: February 2014 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: October 2012 PRINTED COPIES OF THIS

3、 DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices a

4、nd to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and has been replaced by MPAPS A-0 Part I, Section A For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or

5、reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2012 by Navistar, Inc. FEBRUARY 2012 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS A-0, PART I, APPX TITLE: Chemical Composition of I

6、nternational Standard Steels North American and Global Steels - Appendix CURRENT ISSUE DATE: February 2012 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specif

7、ication may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. For questions, contact MaterialsEngineeringN VOID