NAVISTAR CEMS A-8-2015 VOID - Steel Wire (Includes Appendix).pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. AUGUST 2015 Page 1 of 1 INTERNATIONAL TRUCK AND ENGINE CORPORATION CEMS (CORPORATE

2、 ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS A-8 TITLE: Steel Wire CURRENT REV No. DATE: 1508 August 2015 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This sp

3、ecification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits

4、prior to use. Change Notice: Made Void This specification is VOID, and is replaced by MPAPS A-8. For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are

5、 required to assume all patent liability. 2015 by Navistar, Inc AUGUST 2015 Page 1 of 1 INTERNATIONAL TRUCK AND ENGINE CORPORATION CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS A-8, APPX TITLE: Steel Wire Appendix CURRENT REV No. DATE: 1508 August 2015 WRITTEN/REVIEWED BY: Materia

6、ls Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: October 2001 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety is

7、sues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made Void This specification is VOID, and is replaced by MPAPS A-8. For questions, contact MaterialsEngineeringN VOID