NAVISTAR CEMS B-26-2011 Miscellaneous Lubricants.pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2011 Navistar, Inc. AUGUST 2011 Page 1 of 3 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICA

2、TION) NUMBER: CEMS B-26 TITLE: Miscellaneous Lubricants CURRENT ISSUE DATE: August 2011 WRITTEN/REVIEWED BY: Material Engineering APPROVED BY: Material Engineering SUPERSEDES ISSUE OF: August 2006 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve ha

3、zardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notic

4、e: Replaced “International Truck and Engine Corporation” with Navistar, Inc. per corporate directive; editorial changes. 1.0 SCOPE This specification covers the Companys requirements for miscellaneous product lubricants. 2.0 INTRODUCTION Miscellaneous and special lubricants are used in applications

5、where more common lubricants have not provided satisfactory service. 2.1 Restricted Chemical Substances Effective January 1, 2007, all product supplied to the requirements of this specification must comply with the requirements of the CEMS B-50 specification. 3.0 CONTENTS PAGE REFERENCE DOCUMENTS 1

6、PROPERTY REQUIREMENTS 1 QUALITY 2 METHODS OF TEST 2 SOURCE APPROVAL AND QUALITY CONTROL 2 DESIGNATION ON DRAWINGS AND PURCHASE ORDERS 3 PACKING AND SHIPPING 3 4.0 REFERENCE DOCUMENTS Quality System Standard ISO 9001 or TS-16949 ASTM D 88 NAVISTAR CEMS B-50 ASTM D 1500 CFR Title 29, Part 1910 ASTM D

7、92 NAVISTAR Manufacturing Standard MS-D-13 ASTM D 97 ASTM D 445 ASTM D 287 5.0 CLASSIFICATION Lubricants are classified by their viscosity. NUMBER: CEMS B-26 TITLE Miscellaneous Lubricants CURRENT ISSUE DATE: August 2011 This document is restricted and may not be sent outside Navistar, Inc. or repro

8、duced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2011 Navistar, Inc. AUGUST 2011 Page 2 of 3 6.0 PROPERTY REQUIREMENTS The material purchased to this specification will conform to the requirements shown in Table 1. TABLE 1 LUBRICANT

9、REQUIREMENTS Property Navistar Grade Test Method (ASTM) 610H 620H 621H* Application Vacuum Pump Twine Base Twine Oil Blend - Viscosity at 100 F SUS 80-84 110-115 72-76 D 88 Kinematic, cSt 15.7-16.7 22.8-24.0 13.6-14.6 D 445 Pour Point, F, Max -20 0 0 D 97 Flash Point, F, Min 285 320 270 D 92 Fire Po

10、int, F, Min 315 - - D 92 Gravity, AP1 20-27 23 Max 26 Max D 287 Weight per Gallon at 60 F, lbs, Min - 7.65 7.48 - Color, ASTM, Max 2 3 2 D 1500 *Will be produced by blending 80% of Navistar Grade 620H oil by volume with 20% of distillate. 7.0 QUALITY All product supplied shall be clean and free of v

11、isible water, abrasives, coarse fillers, or other defects harmful to product performance. The supplier should be capable of providing statistical evidence that the material has been manufactured within process control limits established by the supplier for this product and that the process is capabl

12、e of meeting the requirements of this specification. 8.0 METHODS OF TEST All tests will be performed in accordance with the ASTM test requirements given in Table 1. 9.0 SOURCE APPROVAL AND QUALITY CONTROL 9.1 Supplier Requirements All suppliers to Navistar are required to be registered to ISO 9001 Q

13、uality System Requirements. Navistar will also accept TS-16949 registration as long as the supplier can also fulfill all AIAG PPAP (Production Part Approval Process) documentation and approval requirements. Suppliers must maintain their certification with an accredited registrar and must furnish cop

14、ies of registration certificates to their Navistar Corporate Buyer upon request . 9.2 Approval Parts supplied against contracts or purchase orders citing this specification shall be equivalent in all respects to those samples which were approved by the purchaser. No changes in formulation or process

15、ing practices are permitted without approval. In the event that changes in material, properties, processing practices, construction, color, or labeling of the product are required, the supplier shall notify Materials Engineering, TDTC, and Purchasing and Supplier Development of the proposed change(s

16、). Test data indicating conformance to all requirements of this specification, test samples, and new or amended or updated Material Safety Data Sheet(s) (MSDS), in accordance with CFR Title 29, Part 1910 shall be submitted with the request for change. NUMBER: CEMS B-26 TITLE Miscellaneous Lubricants

17、 CURRENT ISSUE DATE: August 2011 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2011 Navistar, Inc. AUGUST 2011 Page 3 of 3 9.3 Process Control The supp

18、lier shall either perform and report results of tests on specific lots of parts produced using ISO 9001 or TS-16949 guidelines, or provide statistical evidence of the lot having been produced in a state of statistical control and with a process capable of providing all required properties. The part

19、supplier and the plant metallurgist and/or the quality control manager of the using Navistar plant may determine testing and reporting requirements on specific products. 10.0 DESIGNATION ON DRAWINGS AND PURCHASE ORDERS Material designation on purchase orders for the appropriate lubricant will be as

20、follows: Vacuum Pump Oil, Grade 610H, CEMS B-26 Twine Oil Base, Grade 620H, CEMS B-26 Twine Oil Blended, Grade 621H, CEMS B-26 11.0 PACKING AND SHIPPING Shipping, packing and identification shall be in accordance with Manufacturing Standard MS-D-13. 12.0 TECHNICAL INFORMATION For further information

21、 related to the technical content of this specification, contact: Suppliers may purchase copies of this specification by contacting: Materials Engineering and Technology Dept. Truck Development and Technology Center 2911 Meyer Road Fort Wayne, IN 46803 E-mail: MaterialsEngineeringN IHS Global Inc. 15 Inverness Way East Englewood CO 80112-5776 Phone: 1-800-854-7179 E-mail: AutomotiveIHS.com Website: http:/