NAVISTAR CEMS E-6-2016 VOID - Gray Iron Castings (Includes Appendix).pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2016 by Navistar, Inc. APRIL 2016 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFI

2、CATION) NUMBER: CEMS E-6 TITLE: Gray Iron Castings CURRENT REV. No.: 1604 DATE: Apr. 2016 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: Rev. 0202 February 2002 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may invol

3、ve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change

4、Notice: Made VOID. This specification is VOID, and is replaced by MPAPS E-6 For questions, contact MaterialsEngineeringN VOID This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume a

5、ll patent liability. 2016 by Navistar, Inc. APRIL 2016 Page 1 of 1 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS E-6, APPX TITLE: Gray Iron Castings - Appendix CURRENT REV. No.: 1604 DATE: Apr. 2016 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Eng

6、ineering SUPERSEDES: Rev. 0202 February 2002 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: Made VOID. This specification is VOID, and is replaced by MPAPS E-6 For questions, contact MaterialsEngineeringN VOID