NAVISTAR CEMS G-18-2007 VOID - Cadmium Plating (Includes Appendix).pdf

1、INTERNATIONAL TRUCK and ENGINE CORPORATION CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS G-18 TITLE: Cadmium Plating CURRENT ISSUE DATE: June 2007 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: April 2002 PRINTED COPIES OF THIS D

2、OCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and

3、 to determine the applicability of regulatory limits prior to use. Change Notice: VOID VOID For assistance in determining a replacement coating, contact TDTC Materials Engineering at: MaterialsEngineeringNav-I This document is restricted and may not be sent outside International Truck and Engine Cor

4、poration or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2007 International Truck and Engine Corporation. JUNE 2007 Page 1 of 1 This document is restricted and may not be sent outside International Truck and Engine Corporati

5、on or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2007 International Truck and Engine Corporation. INTERNATIONAL TRUCK and ENGINE CORPORATION CEMS (CORPORATE ENGINEERING MATERIAL SPECIFICATION) NUMBER: CEMS G-18, APPX TITLE

6、: Cadmium Plating - Appendix CURRENT ISSUE DATE: June 2007 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: April 2002 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment

7、, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change Notice: VOID VOID JUNE 2007 Page 1 of 1