NAVISTAR MPAPS S-W-4 101-GS PL-2015 Ball Joints C English Series (Noun Code C 4770).pdf

1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 8 NAVISTAR, INC. Material, Parts, and Process Specifications (

2、MPAPS) NUMBER: MPAPS S-W-4.101-GS/PL Former Designation: ESP-W-4.101-GS TITLE: Ball Joints English Series (Noun Code 4770) CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-W-4.101-GS - August 2006 PRINTED COPIES OF THIS

3、 DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices a

4、nd to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format; Combined GS, PP, NPP. 1.0 GENERAL: This standard conforms to the latest issue of the SAE standard on Ball Joints. It covers the general and dimensional data for those types of ball joints

5、 commonly used on control linkages in automotive, construction, and industrial applications. The inclusion of dimensional data in this standard is not intended to imply that all the products described are stock production sizes. Users are requested to consult with manufacturers concerning stock prod

6、uction parts. 2.0 CONTENTS: Page General 1 Policy for Selecting Parts for New Design 1 Dimensions and Tolerances 1 Threads 2 Material 2 Finishes 2 Restricted Chemical Substances 2 Lubrication 2 Workmanship 2 Ball Joints 3 Part List 7 Technical Information 8 3.0 POLICY FOR SELECTING PARTS FOR NEW DES

7、IGN: For new design, parts shall be selected from “Approved“ part list only. Threads - Class 2A Fine Pitch Finish Zinc Trivalent (ZN6A) 4.0 DIMENSIONS AND TOLERANCES: Tabulated dimensions will apply to the finished parts, plated or otherwise processed as specified by the user. Limits on hexagon or r

8、ound bar shapes will be within the commercial tolerance of the bar stock material from which the components are produced. All dimensions are shown in decimal-inch. NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Joints REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. o

9、r reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 2 of 8 5.0 THREADS: Unified Series, Class 2A external threads and Class 2B internal thread will apply to plain finish (unplated) parts. For

10、 externally threaded components with additive finish, the maximum diameters of Class 2A may be exceeded by the amount of the allowance; that is, the basic diameters (Class 2A maximum diameters plus the allowance) apply to an externally threaded part after plating. For internally threaded components

11、with additive finish, the Class 2B diameters apply after plating. External threads will be chamfered to a diameter 0.01 inch less than the minor diameter to produce a length of chamfered or partial thread equivalent to 3/4 to 1-1/4 times the pitch (rounded to a three-place decimal). Internal threads

12、 will be countersunk 90 degree included angle to a diameter 0.01 inch greater than the major diameter of the thread (rounded to a two-place decimal). 6.0 MATERIAL: Ball joints are to be made from low carbon free machining steel. The ball screw and mating plug components of Types A, AL, B and C and f

13、or ball screws for Types F, G, and S will be case hardened to a core depth of .003 - .005 for sizes up to and including 3/8 inches, and .005 - .007 for sizes over 3/8 inches. Hardness is to be R15N 89 min or file hard. Cushioning discs will be Neoprene, Buna N rubber, or equivalent material Dust cov

14、ers will be Neoprene, Buna N rubber, or equivalent material of such construction as to prevent dirt and dust from entering the ball cavity. 7.0 FINISHES: Unless otherwise specified, carbon steel ball joints will be placed in accordance with International Engineering Material Specification and class

15、listed below: Zinc Trivalent (ZN6A) MPAPS G-20, Class 6A. Hardened carbon steel components of ball joints which are plated are subject to hydrogen embrittlement and will be baked or otherwise processed to obviate such embrittlement. 8.0 RESTRICTED CHEMICAL SUBSTANCES: Effective January 1, 2007, all

16、product supplied to the requirements of this specification must comply with the requirements of the MPAPS B-50 specification. 9.0 LUBRICATION: Unless otherwise specified by user, ball joints will be supplied with ball sockets suitable lubricated in accordance with manufacturers practice. 10.0 WORKMA

17、NSHIP: Ball joints must be free from burrs, loose scale, sharp edges, and any other defects which might affect their serviceability. NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Joints REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission

18、 from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 3 of 8 11.0 BALL JOINTS (NOUN CODE 4770): 11.1 Type A, AL, B, C: *These dimensions are given for design purposes only and are not intended for inspection. DIMENSIONS OF T

19、YPES A, AL, B, and C BALL JOINTS Nominal Ball Joint Size And Thread Diameter, A Thrds Per Inch B C D E F G J J1 K K1 L L1 M N * P * Stud Ball Full Full Dia Diameter, Ref* Thd Thd +.01 Ref, .02 .02 Max Hex Min Dia .03 .03 .03 .03 Min Min -.00 Ref Max Max Min No. 10 (.190) 32 .44 .44 .06 .312 .12 .38

20、.88 1.47 1.25 1.81 .44 .56 .20 .50 .65 .255 .250 No. 12 (.216) 32 .44 .44 .06 .312 .12 .38 .88 1.47 1.25 1.81 .44 .56 .23 .50 .65 .255 .250 1/4 (.250) 28 .47 .56 .06 .375 .12 .44 .97 1.81 1.38 2.25 .50 .88 .27 .50 .72 .305 .300 5/16 (.312) 24 .53 .69 .09 .438 .16 .50 1.12 1.94 1.56 2.38 .56 1.00 .33

21、 .50 .81 .350 .345 3/8 (.375) 24 .69 .88 .09 .500 .19 .62 1.38 - 1.94 - .75 - - - 1.03 .424 .419 7/16 (.438) 20 .88 1.12 .12 .625 .25 .75 1.94 - 2.62 - 1.00 - - 1.28 .555 .550 1/2 (.500) 20 .88 1.12 .12 .625 .25 .75 1.94 - 2.62 - 1.00 - - - 1.28 .555 .550 NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Jo

22、ints REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 4 of 8 11.2 Type D, DS: DIMENSIONS OF TYPES D a

23、nd DS BALL JOINTS Nominal Ball Joint Size and Thread Diameter, A B C C D E F G H J K L P* Thrds Per Inch .03 .02 .02 Full Thd Min Max Max Min Dia .03 .03 .03 Ref Max No. 10 (.190) 32 .53 .44 .56 .06 .375 .19 .28 .33 1.03 2.03 .50 .70 No. 10 (.190) 32 .53 .44 - .06 .375 .19 .28 .33 .78 - .38 .70 No.

24、12 (.216) 24 .53 .56 .56 .06 .375 .19 .28 .33 1.03 2.03 .50 .70 No. 12 (.216) 32 .53 .56 .56 .06 .375 .19 .28 .33 1.03 2.03 .50 .70 1/4 (.250) 28 .56 .56 .56 .06 .438 .19 .31 .35 1.06 2.09 .56 .75 5/16 (.312) 24 .69 .69 .69 .09 .562 .28 .44 .45 1.31 2.59 .69 .94 * These dimensions are given for desi

25、gn purposes only and are not intended for inspection. 11.3 Type DC: NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Joints REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to as

26、sume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 5 of 8 DIMENSIONS OF TYPE DC BALL JOINTS C D E F G H J K L L P Nominal Ball Joint Size Thrds and Thread Per Dia Diameter, A Inch .02 Max Hex Min Dia .005 .03 .03 .02 .01 .005 STYLE 1 No. 10 (.190) 32 .31 .06 .438 .19 .50 .328 .75 1.12

27、- - - 1/4 (.250) 20 .44 .09 .438 .19 .50 .328 .75 1.12 - - - 1/4 (.250) 20 .56 .09 .438 .19 .50 .328 .75 1.12 - - - 1/4 (.250) 28 .44 .06 .438 .19 .50 .328 .75 1.12 - - - 1/4 (.250) 28 .56 .06 .438 .19 .50 .328 .75 1.12 - - - 5/16 (.312) 24 .62 .09 .438 .19 .50 .328 .75 1.12 - - - 5/16 (.312) 24 .75

28、 .09 .438 .19 .50 .328 .75 1.12 - - - 3/8 (.375) 24 .62 .09 .438 .19 .50 .328 .75 1.12 - - - STYLE 2 No. 10 (.190) 32 .50 .06 .375 .09 .44 .197 .62 .78 .40 .12 .250 1/4 (.250) 20 .44 .09 .438 .09 .50 .328 .78 1.02 .34 .12 .250 1/4 (.250) 28 .44 .06 .438 .09 .50 .328 .78 1.02 .34 .12 .250 5/16 (.312)

29、 24 .62 .09 .438 .11 .56 .380 .75 1.03 .53 .19 .344 11.4 Type F: DIMENSIONS OF TYPE F BALL JOINTS B C D E F G K J L Nominal Ball Joint Size Thrds Across and Thread Per Flats Diameter, A Inch .03 .02 Max Max Min Dia .03 Min No. 10 (.190) 32 .438 .438 .062 .312 .125 .375 1.125 .875 .438 No. 12 (.216)

30、32 .438 .438 .062 .312 .125 .375 1.125 .875 .438 1/4 (.250) 28 .469 .562 .062 .375 .125 .438 1.312 .969 .500 5/16 (.312) 24 .531 .688 .094 .438 .156 .500 1.500 1.125 .562 3/8 (.375) 24 .688 .875 .094 .500 .188 .625 1.812 1.375 .750 NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Joints REVISION: 1506 This

31、 document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 6 of 8 11.5 Type G: Nominal Ball B C D E F G G1J K L P* Joint Size Thrd

32、s Across Full and Thread Per Flats Thread Ref Diameter, A Inch .02 .02 Max Hex Min Min .02 .02 Min Max STYLE 1 No. 10 (.190) 32 .44 .44 .06 .312 .12 .38 .31 .88 1.16 .47 .65 (.250) 28 .47 .56 .06 .375 .12 .44 .38 .97 1.31 .53 .72 5/16 (.312) 24 .53 .69 .09 .438 .16 .50 .44 1.12 1.56 .59 .81 3/8 (.37

33、5) 24 .69 .88 .09 .500 .19 .62 .56 1.38 1.81 .81 1.03 7/16 (.438) 20 .88 1.12 .12 .625 .25 .75 .69 1.94 2.50 1.12 1.28 1/2 (.500) 20 .88 1.12 .12 .625 .25 .75 .69 1.94 2.50 1.12 1.28 STYLE 2 No. 10 (.190) 32 .44 .44 .06 .312 .12 .38 - .88 1.06 .47 .65 (.250) 28 .47 .56 .06 .375 .12 .44 - .97 1.22 .5

34、0 .72 5/16 (.312) 24 .53 .69 .09 .438 .16 .50 - 1.12 1.41 .56 .81 3/8 (.375) 24 .69 .88 .09 .500 .19 .62 - 1.38 1.69 .75 1.03 7/16 (.438) 20 .88 1.12 .12 .625 .25 .75 - 1.94 2.38 1.00 1.28 1/2 (.500) 20 .88 1.12 .12 .625 .25 .75 - 1.94 2.38 1.00 1.28 5/8 (.625) 18 1.00 1.12 .12 .750 .31 .88 - 2.06 2

35、.58 1.00 1.47 3/4 (.750) 16 1.06 1.12 .12 .875 .31 1.00 - 2.12 3.00 1.12 1.59 STYLE 4 No. 10 (.190) 32 .47 .44 .06 .375 .12 .44 - .97 1.22 .44 .72 (.250) 28 .47 .56 .09 .375 .12 .44 - .97 1.22 .50 .72 5/16 (.312) 24 .53 .69 .09 .438 .16 .50 - 1.12 1.41 .56 .81 3/8 (.375) 24 .69 .88 .09 .500 .19 .62

36、- 1.38 1.69 .75 1.03 7/16 (.438) 20 .88 1.12 .12 .625 .25 .75 - 1.94 2.38 1.00 1.28 1/2 (.500) 20 .88 1.12 .12 .625 .25 .75 - 1.94 2.38 1.00 1.28 5/8 (.625) 18 1.00 1.12 .12 .750 .31 .88 - 2.06 2.58 1.00 1.47 * These dimensions are given for design purposes only and are not intended for inspection.

37、*Style 4 ball joints in all sizes are furnished with both ball studs and ball studs hardened to assure longer wear. NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Joints REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate T

38、echnical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 7 of 8 11.6 Type S: 12.0 PART LIST: 12.1 Approved: Nominal Size TPI and Class Type Dust Cover Finish Part Number 1/4 28-2A-2B G Yes ZN6A 27258R1 5/16 24-2A-2B G Yes ZN6A 310673R91 1/2 20-

39、2A-2B G Yes ZN6A 333805R1 B C D E F G G1 H J K L P* Nominal Ball Joint Size Thrds Full and Thread Per Dia Dia Dia Dia Thrd Ref Diameter, A Inch .02 .02 Max Hex Min .010 .010 .01 .02 .02 Min Max STYLE 1 No. 10 (.190) 32 .47 .44 .06 .312 .12 .312 .312 .44 .91 1.09 .44 .72 No. 12 (.216) 32 .47 .44 .06

40、.312 .12 .312 .312 .44 .91 1.09 .44 .72 1/4 (.250) 28 .47 .56 .06 .312 .12 .312 .312 .44 .91 1.09 .50 .72 5/16 (.312) 24 .59 .69 .09 .438 .16 .438 .438 .62 1.25 1.56 .56 .93 3/8 (.375) 24 .78 .88 .09 .500 .19 .562 .562 .75 1.56 1.94 .75 1.19 7/16 (.438) 20 .97 1.12 .12 .625 .25 .750 .750 1.00 2.03 2

41、.53 1.00 1.50 1/2 (.500) 20 .97 1.12 .12 .625 .25 .750 .750 1.00 2.03 2.53 1.00 1.50 5/8 (.625) 18 1.12 1.12 .12 .750 .31 .875 .875 1.12 2.31 2.88 1.00 1.71 STYLE 2 1/4 (.250) 28 .47 .56 .06 .375 .12 .562 .438 .53 .97 1.25 .53 .78 5/16 (.312) 24 .53 .69 .09 .438 .16 .625 .500 .59 1.12 1.45 .59 .87 3

42、/8 (.375) 24 .69 .88 .09 .500 .19 .750 .625 .75 1.38 1.75 .81 1.09 1/2 (.500) 20 .88 1.12 .12 .625 .28 .938 .750 .89 1.94 2.38 1.12 1.39 NUMBER: MPAPS S-W-4.101-GS/PL TITLE: Ball Joints REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permis

43、sion from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 8 of 8 13.0 TECHNICAL INFORMATION: For further information related to the technical content of this specification, contact: Suppliers may purchase controlled copies of this specification by contacting: Materials Engineering and Technology Dept. 10400 W. North Avenue Melrose Park, IL 60160 E-mail: MaterialsEngineeringN IHS Global Inc. 15 Inverness Way East Englewood CO 80112-5776 Phone: 1-800-854-7179 E-mail: AutomotiveIHS.com Website: http:/