NAVY A-A-1898 D-2012 CUSHIONING MATERIAL CELLULOSIC PACKAGING.pdf

1、FSC 8135 COMMERICAL ITEM DESCRIPTION CUSHIONING MATERIAL, CELLULOSIC, PACKAGING The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This document covers cushioning material in roll and multifold unit forms used for packin

2、g applications. 2. CLASSIFICATION. The cushioning material shall be of the following grades, classes, styles, and sizes. 2.1 Grade. Grade I - Water Absorbent Grade II - Water Resistant 2.2 Class. Class A - Low Tensile Strength Class B - Medium Tensile Strength Class C - High Tensile Strength 2.3 Sty

3、le. Style 1 - Rolls, plain Style 2 - Rolls, perforated Style 3 - Multifold units, longitudinally compressed Style 4 - Multifold units, longitudinally compressed and perforated A-A-1898D 15 October 2012 SUPERSEDING A-A-1898C 22 February 1994Comments, suggestions, or questions on this document should

4、be addressed to: Commander, Naval Air Warfare Center Aircraft Division, Code 4L8000B120-3, Highway 547, Lakehurst, NJ 08733-5100 or emailed to michael.sikoranavy.mil . Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online databa

5、se at https:/assist.dla.mil. METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-1898D 2 2.4 Size. Size Compressed Length Width Nominal Thickness Size A 10.7 meters (35) 30.5 cm (12) 19.1 mm (0.75) Size B 10.7 meters (35) 61.0 cm (24) 19.1 mm

6、75) Size C 7.9 meters (26) 61.0 cm (24) 25.4 mm (1.00) Size D 50.3 meters (165) 101.6 cm (40) 9.4 mm (0.37) Size E 50.3 meters (165) 91.4 cm (36) 9.4 mm (0.37) Size F 39.6 meters (130) 76.2 cm (30) 12.7 mm (0.50) Size G 31.7 meters (104) 50.8 cm (20) 12.7 mm (0.50) Size H 18.3 meters (60) 50.8 cm

7、20) 25.4 mm (1.00) Size I 61.0 meters (200) 50.8 cm (20) 6.4 mm (0.25) Size J 30.5 meters (100) 91.4 cm (36) 25.4 mm (1.00) Size K 91.4 meters (300) 61.0 cm (24) 5.1 mm (0.20) Size L 61.0 meters (200) 61.0 cm (24) 6.4 mm (0.25) Size M 76.2 meters (250) 61.0 cm (24) 6.4 mm (0.25) 3. SALIENT CHARACTE

8、RISTICS. 3.1 Construction and workmanship. The cushioning material shall be composed of cellulosic material and shall be constructed in any manner which ensures compliance with all the requirements of this Commercial Item Description. Material shall be perforated or nonperforated, made in rolls or i

9、n longitudinally compressed multifold units. The material shall be clean and free from any defects which might affect its utility. 3.2 Length and width. The rolls or multifold units of the cushioning material shall have a length not less than 98 percent of the specified length. The width shall be as

10、 specified with a tolerance of 6.35 mm (1/4inch). Unless otherwise specified in the contract or purchase order, the distance between rows of perforations shall be 76.2 mm (30 inches) with a tolerance of 2.54 cm (1 inch). Provided by IHSNot for ResaleNo reproduction or networking permitted without li

11、cense from IHS-,-,-A-A-1898D 3 3.3 Physical properties. The cushioning material shall meet all of the requirements of this commercial item description. All tests, except the expansion test, shall be performed on fully expanded cushioning material. 3.3.1 Thickness. The measured thickness shall be not

12、 less than 85 percent of the nominal thickness (see 2.4) when tested as specified in 5.2.2. 3.3.2 Strain. The strain limit shall be not less than 50 or greater than 75 percent when tested as specified in 5.2.3. 3.3.3 Expansion. The cushioning material when longitudinally compressed shall expand not

13、less than 4.8 times its compressed length without rupture of the plies when tested as specified in 5.2.4. 3.3.4 Absorbency capacity. The grade I cushioning materials water/fiber ratio shall be not less than 14 when tested as specified in 5.2.5. The grade II cushioning materials water/fiber ratio sha

14、ll be not greater than 3, when tested as specified in 5.2.5. 3.3.5 Tensile Strength. The tensile strength in each direction shall be not less than that specified in table I, when tested as specified in 5.2.6. TABLE I. Tensile strengths. Nominal Thickness Low Strength Tensile Medium Strength Tensile

15、High Strength Tensile 25.4 mm (1.00) 4.448N (1.00 lb) 26.689N (6.00 lb) 177.929N (40.00 lb) 19.1 mm (0.75) 3.336N (0.75 lb) 20.017N (4.50 lb) 133.447N (30.00 lb) 12.7 mm (0.50) 2.224N (0.50 lb) 13.345N (3.00 lb) 88.964N (20.00 lb) 9.4 mm (0.37) 1.646N (0.37 lb) 9.875N (2.22 lb) 65.834N (14.80 lb) 6.

16、4 mm (0.25) 1.112N (0.25 lb) 6.672N (1.50 lb) 44.482N (10.00 lb) 5.1 mm (0.20) 0.890N (0.20 lb) 5.338N (1.20 lb) 35.586N (8.00 lb) * N - Newtons 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials in accordance with Paragraph 23.403 of the Federal Acquisition

17、Regulation. 5. PRODUCT CONFORMANCE. 5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale i

18、n the commercial market. The Government reserves the right to require proof of such conformance. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-1898D 4 5.2 Inspection requirements. 5.2.1 Sampling. Samples shall be selected for inspection in acco

19、rdance with ASQ Z1.4, using the plans specified in table II (see 7.4). A lot shall consist of a number of sample units manufactured by the same process from the same components at the same time. Random samples shall be drawn from each lot for the end item inspection. Unless otherwise specified in th

20、e contract or purchase order every lot shall be tested. TABLE II. Sampling. Inspection Type Inspection Level Sample Unit Required Paragraph Construction, Workmanship, Length width 30.5 cm (12); Nominal thickness 19.1 mm (0.75) B- Size B - Compressed length 10.7 meters (35); width 61.0 cm (24); Nomin

21、al thickness 19.1 mm (.075) C- Size C - Compressed length 7.9 meters (26); width 61.0 cm (24); Nominal thickness 25.4 mm (1.00) D- Size D - Length 50.3 meters (165); width 101.6 cm (40); Nominal thickness 9.40 mm (0.37) E- Size E - Length 50.3 meters (165); width 91.4 cm (36); Nominal thickness 9.40

22、 mm(0.37) F- Size F - Length 39.6 meters (130); width 76.2 cm (30); Nominal thickness 12.7 mm (0.50) G- Size G - Length 31.7 meters (104); width 50.8 cm (20); Nominal thickness 12.7 mm (0.50) H- Size H - Length 18.3 meters (60); width 50.8 cm (20); Nominal thickness 25.4 mm (1.00) I- Size I - Length

23、 61.0 meters (200); width 50.8 cm (20); Nominal thickness 6.4 mm (0.25) J- Size J - Length 30.5 meters (100); width 91.4 cm (36); Nominal thickness 25.4 mm (1.00) K- Size K - Length 91.4 meters (300); width 61.0 cm (24); Nominal thickness 5.1 mm (0.20) L- Size L - Length 61.0 meters (200); width 61.

24、0 cm (24); Nominal thickness 6.4 mm (0.25) M- Size M - Length 76.2 meters (250); width 61 cm (24); Nominal thickness 6.4 mm (0.25) 1- Style 1 - Rolls, plain 2- Style 2 - Rolls, perforated 3- Style 3 - Multifold unit, longitudinally compressed 4- Style 4 - Multifold unit, longitudinally compressed an

25、d perforated A- Class A - Low Tensile Strength B- Class B - Medium Tensile Strength C- Class C - High Tensile Strength 1- Grade I - Water Absorbent 2- Grade II - Water Resistant 3- Grade III - Fire Retardant, Water Resistant Provided by IHSNot for ResaleNo reproduction or networking permitted withou

26、t license from IHS-,-,-A-A-1898D 7 7.2 Source of documents. 7.2.1 Federal Acquisition Regulation (FAR) 23.403 can be obtained online at www.acquisition.gov/far. Code of Federal Regulation 29 CFR 1910.1200 is available from www.gpoaccess.gov/cfr/ . Both the FAR and CFR can also be obtained from the S

27、uperintendent of Documents, U.S. Government Printing Office, Washington, DC, 20402. 7.2.2 Federal Standards are available online at https:/assist.dla.mil/quicksearch/ or https:/assist. dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-50

28、94. 7.2.3 ASTM Standards are available online at http:/www.astm.org or from the American Society for Testing and Materials, 100 Barr Harbor Dr., Conshohocken, PA, 19428-2959. 7.2.4 American Society for Quality (ASQ) documents are available at http:/www.asq.org or from the American Society for Qualit

29、y, 600 Plankinton Avenue, Milwaukee, WI 53203. 7.3 National Stock Numbers (NSNs). NSN Grade Class Style Size8135-00-664-6948 2 B 1 G8135-00-849-7847 2 A 1 J8135-00-989-9889 2 B 1 C8135-01-507-7923 2 C 3 F7.4 Ordering data. The contract or order should specify the following: a) Grade, class, style an

30、d size required. b) Packaging, packing and marking required. c) Addresses for submission of MSDSs (see 7.5). d) An Acceptable Quality Level of 2.5 percent defective. 7.5 Material Safety Data Sheets. Contracting Officers shall identify those activities requiring copies of completed MSDS prepared in a

31、ccordance with FED-STD-313 and 29 CFR 1910.1200. The pertinent Government mailing addresses for submission of data sheets are listed in Appendix B of FED-STD-313. 7.6 Subject term (key word) listing. Packing Water Absorbent Water Resistant Provided by IHSNot for ResaleNo reproduction or networking p

32、ermitted without license from IHS-,-,-A-A-1898D 8 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AR Navy-AS Navy - AS Air Force - 69 (Project 8135-2010-003) Review activities: Army - AT, CR4, GL, MI, SM Air Force - 99 DLA - SS Other - DS NOTE: The activities listed above were interested

33、in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-