NAVY A-A-50538-1992 APPLICATOR BAIT INSECTICIDE《杀虫剂毒饵撒布机》.pdf

1、A-A-50538 37 W 9999974 0093766 378 = I NOT MEASUREMENT I I SENSITIVE I A-A- 50538 September 14, 1992 COMMERCIAL ITEM DESCRIPTION APPLICATOR, BAIT, INSECTICIDE The General Services Administration has authorized use of this commercial item description. Abstract. This commercial item description (CID)

2、covers an applicator for applying controlled amounts of insecticide bait. operated with one hand and operates on the same principle as the construction caulking gun. The applicator is manually Salient characteristics. 1. Reauirements. The applicator shall meet the requirements specified herein. It s

3、hall be capable of applying viscous or paste bait formulations. The applicator shall as a minimum consist of a body with a handle, a pumping lever (trigger), and a plunger attached to a guide rod for pushing the bait material out of the reservoir. The body shall provide for attaching the bait reserv

4、oir. The applicator shall use removable prefilled or refillable bait reservoirs. applicator shall be made of durable material and provide sufficient leverage to easily dispense the bait material. dripping or oozing is required. when specified. The Clean shutoff of the bait material without A carryin

5、g case and holster shall be provided O 2. Material. The applicator shall be constructed of corrosion-resistant metal for durability and strength. electrically non-conductive material. The reservoirs shall be constructed of 3. Reservoir. Five reservoirs shall hold at least 30 milliliters (mL) each of

6、 bait material and shall be provided with the applicator. The reservoir shall be easily removable from the applicator body to allow reloading the applicator with another type of bait material on site. provided containing 30 mL each of bait material when the holster is provided for a total of 210 mL

7、of bait material. Two additional reservoirs shall be /Beneficial comments (recommendations, additions, deletions) and any pertinent Idata which may be of use in improving this document should be addressed to: I ICommanding Officer (Code 156), Naval Construction Battalion Center, 1 1621 Pleasant Vall

8、ey Road. Port Hueneme. CA 93043-4300. I FSC 3740 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50538 37 9999974 0093767 204 A-A-50538 4. m. Tips shall be suitab

9、le to apply bait material in discrete quantities as little as 1 drop (0.05 mL) or capable of laying a strip or bead 2.381 millimeters wide. Tips shall be provided in 2 types; metal for normal use and plastic (non-conductive material) for use around electrical circuits and equipment. 5. Carrving case

10、 and holster. When specified, each applicator shall be provided with a transport case and a belt-mounted holster. tips, five reservoirs with a volume of 150 mL, shall fit into the transport case; the holster does not. applicator and 2 reservoirs of 30 mL each minimum of bait material. shall be desig

11、ned for mounting on a 2-inch wide belt. with the kit. The applicator, with The belt-mounted holster shall holster the The holster The belt is not provided 6. Color. To reduce the chances of the mistaken appearance of a firearm the applicator and reservoirs shall be of bright colors other than black,

12、 brown, green or silver as specified in the contract. 7. Workmanship. The finished applicators shall be clean and free from burrs, slivers, sharp edges, or rough die, tool gouge or grind marks. Holes for bolts screws, rivets, or threaded fasteners shall be accurately punched or drilled. Rivets shall

13、 be tight with the heads in full contact with riveted members. The parts shall mate properly without excessive play. that affect appearance or serviceability. There shall be no defects 8. Comvarabilitv. Applicators and reservoirs provided shall be equal and comparable to products provided by Special

14、ity Products, Inc., a Division of EFD, Inc . Qualitv assurance provisions. 1. Responsibility for inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Unless disapproved by the Government, except

15、as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein. 2. Responsibilitv for compliance. The inspection requirements specified herein are classified as quality conformance inspection

16、 for compliance. 3. Qualitv conformance inspection. The quality conformance inspection shall be performed on sample applicators and reservoirs selected in accordance with the inspection lot and sampling requirements specified in the contract. inspection shall include examination and operational test

17、s as specified herein. This 4. Inspection lot. All units offered to the Government at one time shall be considered a lot for purposes of inspection. A sample unit shall be one complete applicator with reservoirs with a combined volume of 200 mL of bait material. 5. Examination. Each sample selected

18、in accordance with the inspection lot and sampling requirements shall be examined for compliance with the salient characteristics requirements specified herein. This element of inspection shall 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50

19、538 37 m 9999974 0091768 140 m Holster with two 30 mL reservoirs - - - - - - - - - - - - - -B A-A-50538 encompass all visual examinations and dimensional measurements. Noncompliance with any specified requirements or presence of one or more defects preventing or lessening maximum efficiency shall co

20、nstitute cause for rejection. a 6. Operational test. When operated in various operating positions, the applicator shall dispense bait material and shut off as specified in the requirements section. Contractor certification. substantiating evidence that the product offered meets the salient character

21、istics of this CID and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisi

22、ons of the contract. The contractor shall certify and maintain Metric products. Products manufactured to inch-pound units will be considered on an equal basis with those manufactured using metric dimensions, provided they fall within specified tolerances using conversion tables concained in the late

23、st revision of FED-STD-376, and all other requirements of this CID are met. Note: If a product is manufactured to inch-pound units and those dimensions exceed the tolerances specified in the metric dimensions, a request should be made to the contracting officer to determine if the product is accepta

24、ble. The contracting officer has the option of accepting or rejecting the product. Regulatory requirements. materials in accordance with Public Law 94-580 to the maximum extent practicable. The offerer/contractor is encouraged to use recovered O PackaPinq. Unless otherwise specified in the contract

25、or order, the preservation, packing, and marking shall be in accordance with ASTM D3951. Part or identifying - number (PINl. purposes. The PIN consists of the document identifier (AA50538) and assigned PIN code letters for the different options when ordering. A PIN has been established for ordering

26、Ordering - option: PIN code letter: Basic kit (applicator with five 30 mL reservoirs) - - - - - -A Yellow applicator - - - Y O White applicator - - 3 W Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50538 37 9999974 0093769 087 A-A- 50538 Exampl

27、e : AA50538-A-B-C-R I IlII Red applicator I III Carrying case I II Holster with two 30 mL reservoirs I I Basic kit with five 30 mL reservoirs I Document identifier I III I II I I I NOTE: When any option is deleted from the PIN, place a zero (O) in lieu of the PIN code letter. References. FED-STD-376

28、 is available from Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. ASTM D3951 is available from ASTM, 1916 Race Street, Philadelphia, PA 19103. MILITARY INTERESTS: Custodians Army - MD Navy - YD Air Force - 99 PREPARING ACTIVITY: Navy - YD (Project 3740-0132) 4 Review Activities DLA - CS Navy - MS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-