NAVY A-A-55131-1992 LIGHT CHEMILUMINESCENT 6 IN - 8HR - A G《6 IN - 8HR - A G化学发光灯》.pdf

1、A-A-55131 - 9999974 0120831 bT4 Beneficial comments, recommendations, additions, deletions, clarifications, etc, and any data which may improve this document should be sent to: Commander, Space and Naval Warfare Command, ATTN: SPAWAR 003-114/031, Washington, DC 20363. - ! e t INCH- POUND A-A-55 13 1

2、 I December 10, 1992 I COMMERCIAL ITEM DESCRIPTION LIGHT, CHEMILUMINESCENT, 6 IN - 8 HR - A, G The General Services Administration has authorized the use of this commercial item description. Abstract. This description covers 8 hour 6 inch chemiluminescent lights (commonly known as a light wand) used

3、 for a variety of lighting, marking, and identification purposes. Salient characteristics, 1. Color. The colors of the chemiluminescent lights described in this CID are blue and white. The color wand required shall be identified in the Part Identification Number (PIN) paragraph of this CID. DISTRIBU

4、TION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5513% m 9999974 0320832 530 m A-A-55 13 1 2. Desian. The chemiluminescent light shall be elongated having an overall length

5、of 6 inches plus 0.043 minus 0.375 inches. point diameter shall be no less than .SOO inches and the wand shall have a flat base on one end. The diameter of the flat end shall not exceed -750 inches. The end opposite the flat base shall have a hole .188 inches nominal. Lightsticks shall have a tapere

6、d shape and shall be compatible with the following accessory items; Lightstick Shield (NSN 6260-01-196-0637), Ground Stake (NSN 6260-01-230-8555), Flare, Surface Trip (NSN 6260-01-247-2937), Handle, six (6) inch (NSN 6260-01-255-3345), and Magnetic Base (NSN 6260-01-255-3346). Lightsticks shall be i

7、ndividually wrapped in an airtight wrapper. The mid 3. Interior. The chemiluminescent lights specified in this Commercial Item Description shall produce a level of light intensity as specified in Table I for a specified length of time (8 hours). The chromaticity of the emitted light must also meet t

8、he requirements in Table I. 4. Material Safety Data Sheet. Manufacturer shall provide evidence in the form of a Material Safety Data Sheet (MSDS) (Fed-Std-313) that the components shall not be highly toxic, toxic, corrosive or irritant in terms of the definitions and tests in Code of Federal Regulat

9、ions, Title 16, Part 1500 (Federal Hazardous Substances Act). 5. Test criteria. Illuminance must meet or exceed the data presented in Table I. minutes starting 5 seconds after activation measured at 75 F on lightsticks a minimum of 30 days after manufacture, but not more than 90 days, must meet or e

10、xceed 4,6 foot lambert-hours. Emits white color light, After Ageing Test, illuminance must meet or exceed data in Table II. Activated by manually flexing the plastic tube, breaking the inner vial and shaking to combine components. tube shall not leak and vial. will not break when subjected to an ext

11、ernal pressure equivalent to 30,000 feet at 75 degrees F in a vacuum chamber. Must withstand a free fall, while still in wrapper, from a height of 8.5 feet on a hard surface (concrete) without activating or leakage. 6. Test conditions. The integrated luminance over the first 15 Plastic a. Meter: Dig

12、ital Photometer, TEKTRONIX, Model J16, Sensor Probe J6501. All meters traceable to NIST. b. Wand to Tektronix J16 Meter Distance: 1.50 0.02 inches. C. Temperature stabilization: Wands, while still in sealed foil wrappers, will be placed in a water bath at test temperature for a minimum of one (1) ho

13、ur before activation, d. Remove wand from sealed foil wrapper immediately before activation. Light wand shall be handled by cap end during testing. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55131 9999974 0120833 477 A-A-55 13 1 e. Activat

14、ion method: Bend; agitate for ten (10) seconds. f. Wands shall be agitated for ten (10) seconds before each - I reading. - 1 O g. Wands kept under cover or in darkness; may be exposed to light during movement to and from light meter. h. All meter readings made in darkness. i. Meter kept at 75 degree

15、s F for all tests. j. Temperature tolerances: plus or minus 2 F. . k. Holder, wand test fixture in accordance with DGSC drawing, DGSCV-91-03, Part Number 3. (Enclosure i) 1. Chemiluminescent lights shall be held in a vertical position with cap end down when light output measurement is made, m. Agein

16、g Test - test conditions to be added at a future revision date. Contractor certification. The contractor shall certify, and maintain objective quality evidence that the product offered to the Government meets the salient characteristics of this description and that the product conforms to the produc

17、ers own drawings, specifications, standards, and quality assurance practices and is the same produced as the manufacturers current product offered by the contractor in the commercial marketplace for at least one year preceding the solicitation. The Government reserves the right to require proof of s

18、uch conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within spe

19、cified tolerances using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound uni

20、ts, a request should be made to the contracting officer to determine if the product is acceptable. accepting or rejecting the product. The contracting officer has the option of 3 , Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55131 qqqq974 032

21、0834 303 A-A-5 5 13 1 m rn O d rD O O O o; X a) O O O o . O I- O . CD O I- W O O &o X O . ao I- In O ao O O o O -r r-i r( QI O r( O p: X rn O O O . . N O rl . ab I- 4 O rl -3 O O O E O N .-I . . I- N 4 o tA W H O Z I- N O m O O Qo m . O H W u w H O I- m r( ao O 8-4 . . n- ias ww m r-i w a) r-i 4 O r

22、-i O E r( I- rn . . . d r( ln m rr: O E v) W B 8 a (Y +I E- W Wl4 EU OH Wl4 al m4 4- W HW uw zw OQ i2 na, e H2 nu sf$ *d m +I OU H tA tnW HW Wrr: WE3 HW n 4: . cy I- N In In O cv r( 2 z cv e . o, 4 m Q O -rl -rl ? n m J o, k 7 4 7 E ia 4 ia a o) a a 4 o, a O 4 4 ia o, rl m H m n sa hl m m rn O . r-i

23、 rl rl o 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55131 D 9999974 0320835 24T A-A-55131 I R Li C c 5 Enclosure 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55131 Requlatorv reaui

24、rements. recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. The offeror/contractor is encouraged to use Quality assurance. Foil leakacre. Samples will be tested for foil leakage by application of 6 psi air pressure into the inside of the foil wrap while subme

25、rged under water. A steady stream of air bubbles coming from any portion of the foil, except where the foil has been penetrated by the air supply shall be classified as an airtight foil failure. Shelf life. Each chemiluminescent light shall have a minimum of 46.months life remaining at the time of d

26、elivery to the Government and must have been manufactured within 6 months of the date of delivery to the Government. Fluid Level, The vertical fluid level, when measured from the exterior of the flat base shall be no less than 3 1/4 inches. Preservation, packauinq, P ackins, labelinq, and markinq. T

27、he preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order. Foil wrapping and all other packaging shall be marked with manufacturers lot number and expiration date. Foil wrapping shall be color coded and contain operating instructions. CID based Part Id

28、entification Number. The following Part Identification Numbering procedure is for Government purposes and does not constitute a requirement for the contractor. A-A-55131-X L - A=BLUE CID NUMBER G=WHITE 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-

29、,-A-A-55131 W 9999974 0120837 O12 = A-A-5 5 13 1 Notes. Orderins data. Acquisition documents must specify the following: O a. Title, number, part identification number with applicable color code letter, and date of this document. b. Material Safety Data Sheet (MSDS) shall be provided to Contracting

30、Officer prior to award (FAR 52.233-3 and MSDS Page 2). c. Contracting Officer may request proof of certification of commercial item prior to first contract delivery (See Contractor Certification, Page 3). MILITARY INTEREST: CIVIL AGENCY COORDINATING ACTIVITY: MILITARY COORDINATING ACTIVITY: Custodians Navy-EC Air Force-99 Reviewinq Activities DLA-GS User Activities Navy-YD GSA-FSS PREPARING ACTIVITY Navy-EC AGENT: DLA-GS PROJECT NO. 6260-1012 FSC 6260 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-