NAVY A-A-59610-2004 CABLE COMMUNICATIONS SPECIAL PURPOSE [Superseded NAVY MIL-C-915 61 D CANC NOTICE 1 NAVY MIL-C-915 61 D NAVY MIL-C-915 61 C NAVY MIL-C-915 61 B NAVY MIL-C-915 61.pdf

1、INCH-POUND A-A-59610 02 June 2004 SUPERSEDING MIL-C-915/61D 29 September 1989COMMERCIAL ITEM DESCRIPTION CABLE, COMMUNICATIONS, SPECIAL PURPOSE The General Services Administration has authorized the use of this commercial item description, for all federal agencies. 1. SCOPE. 1.1 Scope. This Commerci

2、al Item Description covers a flexible, single conductor, rated at 600 volts. This cable is intended for shipboard use in areas suitable for watertight applications. 2. SALIENT CHARACTERISTICS. 2.1 Product certification. This product shall be certified by a nationally recognized testing laboratory (N

3、RTL) accredited for testing cable by the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor for compliance with Underwriters Laboratories (UL), Inc. Standard for Electrical Wires, Cables, and Flexible Cords, UL 1581 and the requirements specified herein. 2.2 Materials. Ma

4、terials shall be as specified herein. 2.3 Physical requirements. 2.3.1 Conductor. The conductor shall be 18 AWG stranded, per ASTM B286 and tin-coated copper per ASTM B33. Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document sho

5、uld be sent to: Commander, Naval Sea Systems Command, ATTN: SEA 05Q, 1333 Isaac Hull Avenue, SE, Stop 5160, Washington Navy Yard DC 20376-5160 or emailed to commandstandardsnavsea.navy.mil, with the subject line “Document Comment”. Since contact information can change, you may want to verify the cur

6、rency of this address information using the ASSIST Online database at www.dodssp.daps.mil. FSC 6145 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59610 2.3.2 Insulation. The insulation shall be a type of synthetic rubber per NEMA WC 70 or cross

7、linked polyethylene per NEMA WC 7, with a 0.060-inch maximum wall thickness. 2.3.3 Assembly. The cable shall be insulated with cross-linked polyethylene or synthetic rubber having a 0.055-inch wall thickness. The cable shall be covered with an overall braided shield (individual ends of 34 AWG tin c

8、oated copper, 16 carriers and 6 ends). The shield shall provide a minimum of 88 percent coverage and shall be insulated with a synthetic tape. 2.3.4 Jacket. The cable shall be jacketed with black hypalon having a wall thickness of 0.033 inch with a nylon reinforcing braid (210 nylon 12 carrier, 2 en

9、ds, and 3 picks) and arctic polyvinyl chloride with a 0.030-inch wall thickness. The maximum cable OD is 0.500 inch. 2.4 Performance requirements. 2.4.1 Conductor. The conductor resistance shall not exceed 7.05 ohms per 1000 feet at 25 oC. 2.4.2 Conductor insulation. The conductor to shield insulati

10、on shall have a minimum resistance of 500 megohms per 1000 feet and a minimum voltage withstand of 1500 VAC. 2.4.3 Bend radius. The bend radius of the cable shall be at least 3.0 inches. 2.4.4 Shielding. The shielding shall be removable from the conductor without damage to the insulation or conducto

11、r. 3. REGULATORY REQUIREMENTS. 3.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent possible, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4. PRODUCT CONFORMANCE PROVISIONS. 4.1 Product conformance. The pro

12、ducts provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to r

13、equire proof of such conformance. 4.2. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-3

14、76 and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request shall be made to the contracting officer to determine if the product is acceptable. The

15、 contracting officer has the option of accepting or rejecting the product. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59610 5. PACKAGING. 5.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in t

16、he contract or order. 6. NOTES. 6.1 Ordering data. Purchaser shall specify the following: (a) Title, number and date of this commercial item description. (b) Amount, footage required (continuous length). 6.2 Source of documents. 6.2.1 FED-STD-376 is available from the Standardization Document Order

17、Desk, 700 Robbins Avenue, Building 4/D, Philadelphia, PA 19111-5094, or http:/assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil. 6.2.2 NEMA Standards WC 7 and WC 70 are available from National Electrical Manufacturers Association, 1300 North 17thStreet, Suite 1847, Rosslyn, VA 22209, or www.ne

18、ma.org. 6.2.3 UL Standard 1581 is available from Underwriters Laboratories, Inc., 12 Laboratory Drive, Research Triangle Park, NC 27709-3995, or . 6.2.4 ASTM B33 and B286 are available from ASTM International, 100 Barr Harbor Dr., West Conshohocken, PA 19428, or www.astm.org. 6.3 National stock numb

19、ers (NSNs). The following is a list of NSNs assigned that correspond to this CID. The list may not be indicative of all possible NSNs associated with the CID. 6145-00-155-3526 6.4 Potential sources. Based on information available at the time this document was developed, the following companies manuf

20、acture products that are believed to comply with the salient characteristics of this Commercial Item Description. Manufacturers BICC Brand-Rex 1600 West Main Street Willimantic, CT 06226-1128 BIW Cable Systems, Inc. 22 Joseph E. Warner Blvd. 3 Provided by IHSNot for ResaleNo reproduction or networki

21、ng permitted without license from IHS-,-,-A-A-59610 4 No. Dighton, MA 02764 The Okonite Company P.O. Box 340 Ramsey, NJ 07446 6.5 Key words. Cable Communications Special Purpose Single Conductor 18 AWG 600 Volts Watertight Shipboard Use MILITARY INTERESTS CIVIL AGENCY COORDINATING ACTIVITY: GSA-FSS Custodians: Army - MI Preparing activity: Navy - SH Navy - SH (Project 6145-2319-009) Review activities: Army - CR Navy - CG, EC DLA CC, IS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-