NAVY MIL-C-29431-1987 CAPS GARRISON WOMEN-S《女士守卫帽》.pdf

1、MIL-C-29431 4 m 9999906 0497794 9 m mkc- 29431 (MC) 4 JUNE 1987 MILITARY SPECIFICATION This specification is approve3 for use by U. S. Karine corps, Conmandant of the Marine Corps (JW-2) , Headquarters U. 6. Marine Corps, Vash-: ington, n. C. 20380, by using the self-addressd Standardization Docment

2、. Improvement proposal (DD mnn 1426) appearing at the end of this docurtent or by letter. AMSC N/A ESC 8410 Distribution Statement A. Approved for public release, distribution is dimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-27431 84

3、 m 777770b 0477775 O m MIL-C- 3943 1 (MC) SPECIFICATIONS FEDERAL . V-“-276 . v-T-30 1 NN-p.7 1 , DDD-L-20 MILITARY . MIL-C-368 8 MIM-10176 . MIL-E15011 MIbB-17757 .MILroIREMENTs 3.1 Stardard smple. Standard samples, when furnished, are solely for quid- ance and information to the contractor (see 6.3

4、). Variation from this specifi- cation may appear in the sample, in which case this specification shall govern. 3.2 First article. When specified (see 6.2), contractor shall furnish sample caps for first article inspection and approval. 3.3 Materials 3.3.1 Basic material. Ihe basic material for each

5、 class of caps shall be as follows: (a) Class 1. Cloth, plyester/mol gabardine, 10.6 ounce, gren shde (b) Class 2. Cloth, mol gabardine, 14.5 ounce, qreen shade 2210 con- 2212 confonniw to type II, class 12 of MIM-10176 (see 6.3). forming to type I, class 5 0f-MIL-C-10176 (see 6.3). I) 3 Provided by

6、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3.2 Liniq. nie material for lining the caps shall be cloth, rayon twill 3.7 ounce, conforming to class 1 of MIL-C-368, green shade 2208. 3.3.3 Sweatband. The material for the sweatband shall be cloth, twill, cot

7、- ton, 5.7 to 6.3 ounces, conforming to MIM-29118, except the calor shall be green shade 2224. 3.3.4 Thread All outside seaming and stitching shall be perfoned With silk thread, mnforming to type I of V-T-301 and other seaming and stitching with cotton thread conforming to type I of V-T-276. As an a

8、lternate to the Cotton thread, a polyester, cUtton-mered thread conforming to MIL*-43548, ticket No. 50, 3 ply or ticket No. 70, 2 ply may be used. Ihe proper threads for the vari- ous operations shall be as follawc: peration Type Ticket No. Ply Material Needle/I3obbin Inside seaming and IC2 A 3 Cot

9、ton Both stitching Topstitching tap I A 3 Silk Both crown hamning cur- tain and tacking curtain 3.3.4.1 Color and mlorfastness. The thread shall be ye alive drab shade T-1 cable No. 66023 (See DOD Standard Color Card of officiai Stanardize Shades for Sewing Threads 1968). Ihe rnlored threads, men te

10、sted in acoordance with the applicable thread specification shall shcw good fastness to wet (dry) clean- ing, an in addition, the thread shall show 406d fastness to light. a 3.3.5 Eyelets. The eyelets shall be brass, rolled flange type, with the bar- rel scoired mth 6 to 8 scores. me flange of the e

11、yelet shall be enameled a shade to closely match the shade of the basic material (see 3,3.1), or the entire eyelet may be enameled. .he eyelets, when tested as specified in Section 4, Table III shall anply with the requirements specified herein. Eyelets with a washer may be used. The eyelets shall m

12、nfonn to the followinq dimensions: uitside diameter of barrel, inch: 0,185 + 0,004 Outside diameter of flange, inch: 0.312 ?: 0.005 Length of barrel under flange, inch: 0.145 0.004 0.008 T 0.001 Metal thickness, inch: - 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without l

13、icense from IHS-,-,-i- - - shall cover the raw bottom edge of the curtain arid side crown: and the laver edge shall be 1/8 to 3/16 inch above the bottan finished edge of cap. fie ends of the sweatbawl shall finish to the right or let, but not on, the back seam of cap, aw3 shall lap each other not le

14、ss than 1 inch. The combination identification-size label shall be properly positioned . a. Proprly position the 1-1/4 in incorrect; illegible; of improper size, loca- tion, sequence or method of application. 17 Provided by IHSNot for ResaleNo reproduction or networking permitted without license fro

15、m IHS-,-,-MIL-C-29431 84 9979906 0497811 5.-E MIkC- 2943 1 (MC) 5.1 mesemation and packag ing. Preservation and packaging shall be level A, or ccnmrcia as specified (see 6.2). 5.1 .I kvel A. Each cap shall be placed in an individual polyethylene bag measuring appmxmately 6 inches wide by 15 inches l

16、ong with a 1-inch lip at the open end along the 6-inch dhnsion. Te polyethylene flexible film shall be 0,00125 inch thickness (+ - 25 percent tolerance). Each bag shall contain a label (see 5.3.1). - 5.1.2 oamercial. Caps shall be packaged to afford adequate protection against physical danage during

17、 shipnent from the contractor to the first receiv- ing activity. The package anSI the quantity per package shall be the same as that nonnaly used by the antractor for retail distribution. 5,2 Packirq. Packing shall be level A, i3 or cumvm2ial as specified (see 6.2) . 5.2.1 &vel A 5.2.1.1 Method 1 .

18、One hundred twenty five (1 25) caps of one size only, pack- aged as specified in 5.1 , shall be packed in a fiberboard shipping container, confonnirg to veather-resistant class, size No.2A of MfbB-17757, asserrhle3, closed and reinformced as specified in the Appendix thereto. Wards the end of the cl

19、ontract, or when there is less than the required amount per container of the same size, mixed sizes may be packed within the same shipping container (5.32). 5.2.1 02 (750 caps conformina Method 2. %en specified (see 6.2), six level B shipping containers of one size only) shall he packed in a fiberbo

20、ard shipping container to eather-resistant class, size No. 4 of MTL-3-17757, assenkled, closed ah reinforced as specified in the Appendix thereto. mards the end of the contract, or when there is less than the required munt per container of the saw size, mixed sizes may be packed within the same ship

21、ping container (see 5.3.2) . 5.2.2 kvel . One hundred twenty five (125) caps of one size only, packaged as specified in 5.1, shall be packed in a fiberboard shipping container mnform- irig to domestic class, size No. 2A of YIGB-17757, assenbled and closed as speci- fied in the pgpndix thereto. Wards

22、 the end of the contract, or when there is less than the required munt per container of the same size, mixed sizes may be packed within the same shipping container (see 5.3.2). S.2.3 Comnercial, Caps, ,packaged as specif i& in 5 1, shall be packed in a manner to insure carrier acceptance an safe del

23、ivery at destination at the low- est transprtation rates for such supplies. The quantity oer shipping container shall be the simte as that normally usecl by the contractor for retail distribu- tion. Containers skall carply with the U. S. Festal Service Manual, Uniform Ereight Classification Rule or

24、National Motor Ereight Classiication Rules, as applicable. 18 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-291.13L 81.1 W 9999706 01.197832 7 Es 5-3 Markiw. In addition to any special marking required by the mtract or purchase order, inter

25、ior packages and shipping containers shall be marked in accordance with MfGS“P129 . a 5.3.1 polyethylene bagged packqes. Folyethylene bagged packages shall have the following intormation leqibly printed or stanpd in black directly on the bag across the center face or on a white paper label inserted

26、within the bag so as to permit ready identification. “he bag or label shall indicate the following in- formation, 5.3.2 Mhed sizes. Each chiping container packed with mixed sizes shall have a 5 X 4 inch white paper label securely attached to the end and side directly under the printing or stenciling

27、. The mrds “MIXED SIZES“ shall be plainly stanped or printed thereon and uniler these mrds shall be legibly starriped or printed the mrrect guankity and sizes contained therein. 5.4 Pailetization. men specified (see 6.2), caps packed as specified shall be palletized on a 4-way entry pallet in accord

28、ance with load type 1A of %IL- STD-147. Each prepared load shall be bonded with primary and secondary straps in acoordance with bonding means C,K, and E or O or P. Pallet pattern shall be in accordance with the amndix of MIIr!Xb147. Ihe pallet shall be 4-way, Type I, Class 1 , Style 1, Size A, Wx Gr

29、oup I, If, III or IV of MGP.15011, or 4-WaV, Type IV, V or VIII, Class 1, Style A, Size 2, Wxd Group I, II, TI1 or IV, Grade A of NN-P-71. Interlocking of lo&s shall be effected by reversing the pattern of each course. If the container is of a size which &es not conform to any of the patterns specif

30、ied in ML-STD-147, the pallet pattern used shall be approvd by the contracting officer, 6. N.YII3.s 6.1 Intended use, !he caps described herein are intended for wear by women personnel of the U. S. Marine Corps. 6.2 Ordering data . 6.2.1 Acquisition requirments. Acquisition docmepits should specify

31、the following: (a (b) Class and size (see 1-2)* (c) Whether first article is required (see 3.2). (d) Selection of applicable levels of packaging and packinq (see 5.1 and 5.2). (e) When level A, ythcd 2, nacking is required (see 5.2.1.2) (f) ?hen palletization is required (see 5.4) Title, nmhr and da

32、te of this specification. 19 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-23431 84 333330b 04-77813 3 I MTGC- 29431 (MC) 6.2.7. Data requirements. when this specification is used in an acquisition ar data are require to be delivered, the dat

33、a requirements identified below shall be developed as specified by an approved Data Item Description (M) Rxm 1664) and delivered in accordance with the approved Contract ata Requirements List (CDIRL), incorporated into the contract. Wen the pmvisions of DOD FAR SuFplement, Part 27, Sub-part 27.410-6

34、 (Dn Fbn 1423) are invoked and the W Ebnn 1423 is not used, the data specified below shall be deliver& by the amtractor in accordance with the contract or purchase oder requirements. Deliverable data required by this specification are cited in the follming paragraghs. Paragraph no. Data Requirerrren

35、ts Applicable DID no. wtions (a) 4.2 Inspection System Program DI-R-4803 Plan PrCKiedures (b) 4.4 First Article Inspection DI-1L49 1 - (c) 4.4 first Article Inspection kprt DI-54902 - (Data iten descriptions related to this specification, and identified in section 6 will be aped and listed as such i

36、n DoD 5000.19L, Vol. II, AMSDL. mpies of data item descriptions required by the contractors in connection with specific acquisition functions should be obtained from the Naval mblications and Forrris Center or as directed by the contracting officer.) 6.3 Standard sanple and patterns. Fcir informatio

37、n regarding the availability of standard sanple and patterns, address inquiry to the acquiring activity issu- ing the invitation for bids. 6.4 First article. Exanhatiom, tests and approval shall be as specified by the contracting officer (see 3.2). 6.5 Figures. Figure 1 is furnished for information

38、purpoces only. Tb the extent of any inconsistencies between the written specification ancl the figure, the written specification shall control. 6.6 Subject term (key wr) listing e cap Garrison Wmen s 20 Preparing Activity Navy - MC mject No 84100N629 a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C- 2 9 4 3 1 ( KC) -. . LINING - CROWN CROWN SECTION A-A FIGURE 1: CAP,GARRlSON,NOMANS . .*.-, , rir*., . 4. I .- -. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-