NAVY MIL-C-85123-1978 CONTAINER SHIPPING AND STORAGE GUIDED MISSILE CNU-159 E《CNU-159 E型导弹运输和组装容器》.pdf

1、This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE curement of one type of reusable shipping and storage container for the.PHOENIX Missile AIM-54A Propulsion

2、Section. 2. APPLICABLE DOCUMENTS fication to the extent specified herein. STANDARDS : I FED-STD-101 Preservation, Packaninn NWHC 7796 provided by WPNSTA Earle (NWHC) to verify the contour of missile section supports item 4, 30003-67A246F24 and straps 30003- 67A246D16. figuration shall be such that n

3、o clearance greater than 0.060 5 .005“ shall exist between supports/straps and gage. Each container shall be inspected utilizing a GFE gage, P/N Contour of support and strap in the closed (latched) con- 4.5.3 design and configuration, manufactured under the same conditions and pre- sented for accept

4、ance at one time, shall be considered an inspection lot for quality conformance tests. Inspection shal1,be conducted in accordance with MIL-STD-105 at Level II with an Acceptable Quality Level (AQL) of 1.0. Lot and Acceptable Quality Level. All containers of the same -4- Provided by IHSNot for Resal

5、eNo reproduction or networking permitted without license from IHS-,-,-MIL-C-85123 81 9 7999706 0290005 b XIIrc-85123 (AS) 4.5.4 Test and Equipment and Test Facilities. Unless otherwise specified the manufacturer (see 4.1) shall furnish and maintain all nor- mal test equipment, facilities and personn

6、el necessary for performing all quality conformance tests. The test equipment shall be adequate in quantity, and unless definite requirements are specified, they shall be of sufficient accuracy and quality to permit performance of the required quality conformance test. 4.5.5 Test Conditions. Unless

7、otherwise specified in a particular test, all tests shall be performed at a temperature between 50F and 90F with ambient humidity. Tests. 4.5.6 the pressure (leak) test of 4.4.0 except containers shall show zero leakage for 5 minutes. 5, PREPARATION FOR DELIVERY / Each container manufactured shall b

8、e subjected to - 5.1 Preservation. Twenty-four (24) units of fresh Desiccant, MIL-D-3464, shall be placed in each container and the container cover secured. 5.2 Packing. The container requires no packing for delivery. However, all loose interior pieces and all latches shall be tightly secured. 5.3 I

9、n addition to any special marking required by the contract or purchase order, containers shall be marked in accordance with the applicable marking drawing and MIL-STD-129. 6. NOTES Marking. 6.1 Intended Use. Containers supplies under this this specif ica- tion are intended for use in the shipment an

10、d storage of PHOENIX Missile AIM-54A Propulsion Sections. 6.2 Ordering Data. Procurement documents shall specify: a. Title, number and date of this specification. b. First Article sample size, if different (see. 4.3.1). c. Activity designated to perform testing (see 4.4). Preparing activity : Navy-AS Project 8140- N422 *US. GOVERNMENT PRINTING OFFICE: 1978 - 703-122/2286 -5- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-