NAVY MIL-DTL-16377 H-1996 FIXTURES LIGHTING AND ASSOCIATED PARTS SHIPBOARD USE GENERAL SPECIFICATION FOR《舷侧用照明固定装置和相关部件总说明书》.pdf

1、I,0MIL-DTL-16377HSHIM1L-F-16377G(SH)5 June 1981(See 6.13)DETAIL SPECIFICATIONFfXWRES, LIGHTING: AND ASSOCIATED PARTS:SHIPBOARD USE. GENERAL SPEC1FICATION FORThis specification IS approved for use by the Naval Sea Systems Command,Dep=tment of the Navy, and 1S available for use by all Dep=tments and A

2、genciesof the Department of Defense.1. SCOPE1.1 =. This specification covers fluorescent and incandescent lighting fL%tureslights) and associated parts. used for detail and general illumination on Naval shipsand boats.1.2 . Lighting fWures ae of the foliowing types and ciasses, asspecIiled see 6.2):

3、Type I - Fluorescent.Type 11 - Incandescent.Class 1 - Detail illuation.Class 2- General illumination.Beneficial comments recommendations. additions, deletions and any pertinentdata which may be of use in irnprovtng this document should be addressed to:Commander, SEA 03R42, Naval Sea Systems Command,

4、 2531 Jefferson DavisHwy. Arflngton, VA 22242-5160 by using the self-addressed StandardisationDocument bnprovement propossI (DD Form 1426) aPPe=g at the end of sdocument or by letter.AMSC NIA FSC 6210plSTFUBU.TION S. Approved for pubfic release: distribution is unfimited.Provided by IHSNot for Resal

5、eNo reproduction or networking permitted without license from IHS-,-,-2.ML-DTL-16377H(SH)APPLICABLE DOCUMENTS a712.1 . The documents listed in this section are specffled in sections 3 and 4 ofthis specification. This section does not include documents cited in other sections of thisspecification or

6、recommended for additional information or as examples. white every efforthas been made to ensure the completeness of this list. document users are cautioned thatthey must meet all spedfied requirements documents cited in sections 3 and 4 of thisspecification, whether or not they are lkted.2.2 2.2,1

7、. The foO*g specffl=ttons. sti-dards, and handbooks form a part of this document to the extent specirled herein. Unlessotherwise specified, the issues of these documents are those fisted in the issue of theDepartment of Defense Index of Specifications and Standards (DoDISS) and supplementthereto, ci

8、ted in solicitation (see 6.2.SPECIFICATIONSFEDERUJ-C-580W-F-406 -w-s-755 -Cord, Flexible, and Wire, Fixture, (Electrical, O- to 600-Volt Service).Fittings for Cable, Power, Elecrricaf and Conduit, Metal,Flexble.Starter, Fluorescent Lamp.DEPARTMENT OF DEFENSEMIL-M-14 - Molding Compounds, Thermosettin

9、g.MIL-V- 173 - Varnish, Moisture- and Fungus-Resistant For the Treat-ment of Comrnunlcations, Electronic, and AssociatedEquipment).MIL-S-901 - Shock Tests, H.I. High-Impact: Shipboard Machinery,Equipment and systems, Requirements for.MIL-C-915 - Cable and Cord, Electrical, for Shipbod Use, GeneralSp

10、ecitlcation for.MIL-E-917 - Electric Power Equipment, Basic Requirements (NavalShipboard Use).MIL-B-5423 - Boots, Dust and Water Seal (for Toggle and Push-buttonSwitches. Circuit Breakers. and Rotary- Actuated Parts),Generai Specification for.MIL-P-15024 - Plates, Tags and Bands for ldentiflcatlon o

11、f Equipment.MlL-P- 15024/5 - Plates. Identtilcation.MIL-S-19622 - Stuffing Tubes, Nylon: and Packing Assembles; GeneraISpecitlcation for.MfL-P-24191 - Plastic Sheet. Cast, AcryUc, Shipboard Application (IUumi-nation and Signal Lighttng).MIL-C-24643 - Cables and Cords. Electric, Low Smoke, for Shipbo

12、ardUse, General Specification for.2IProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-16377H(SH)I1!0DEPARTMENT OF DEFENSE (Continued)MIL-C-24643/26 - Cable. Electrical, 600 Volts. Types LSDPS. LSFPS, LSTPSand LS7PS.hlIL-I-24768 - Insulation, Pl

13、astics, Laminated, Thermosetting GeneratSpeclflcation for.MIL-1-24768/ 1 - Insulation, Plastic, Laminated, Thermosetting, Glass-Cloth. Melamine-Resin (GME).MIL-T-55164 - Terminal Boards, Molded, Barrier Screw and Stud es,and Associated Accessories, General Specitlcation for.(See Supplement 1 for lis

14、t of associated specilfcations. )STANDARDSFEDERALFED-STD-H28 -FED-STD-595 -Screw-Thread Stand=ds for Federal Services.Colors Used in Government Procurement.DEPARTMENT OF DEFENSEMIL-STD-108 -MIL-STD- 167-1 -MIL-STD-202 -MIL-STD-454 -MIL-STD-462 -MIL-STD-740 -MIL-STD-2175 -MS16569 -MS16656 -Definition

15、s of and Basic Requirements for Enclosures forElectric and Electronic Equipment.Mechanical Vibrations of Shlpboad Equipment (Type I -Environmental and Type II - Internally Excited).Test Methods for Electronic and Electrical ComponentParts.Standd General Requirements for ElectronicEquipment.Electroma

16、gnetic Interference Chacteristics, Measure-ment of.Airborne and Shuctureborne Noise Measurements andAcceptance Criteria of Shipboard Equipment.Castings, Classification and Inspection of.Switch, Toggle, Double Pole, Single Throw (For Use inLighting Fixtures).Switch, Toggle, Single Pole, Single Throw.

17、(Unfess otherwise indicated, copies of the above specffl.cations, stand=ds, and hand-books are available from the Standardization Documents Order Desk, BLDG. 4D, 700Robb!ns Avenue, Philadeiphta, PA 19111 -5094. 2.3 . The fotiowtng document(s) form a part of thisdocument to the extent specified herei

18、n. Untess otherwise spectffed, the issues of thedocuments which are DOD adopted are those listed in the issue of the DODISS cited in thesolicitation. Unless otherwise specified, the issues of documents not iisted in the DODISS arethe issues of the documents cited in the solicitation (see 6.2).AMERfC

19、AN NATIONAL STANDARDS INSTITUTE (ANSIB46. 1 - Surface Texture (Surface Roughness, Wavfness and Lay).(DoD adoptedY14.36 - Surface Texture Symbols. (DoD adopted)3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MfL-DTL-16377H(SH)Appficatlon for copies s

20、hould be addressed to the Arnerla NatiOnal Standards a71Ifnstitute. Inc., 11 West 42nd Street, 13th Floor, New York, NY 10036. )I AMERICAN SOCIETY FOR TESTING AND MATERfALS (ASTM)I A 342 . Stand=d Test Methods for PermeablllW of Feebly MagneticMaterials.D 635 - Standwd Test Method for Rate of Burnin

21、g and/or Extent and Timeof Burntng of Self-Supporting Plastics tn a Horlzontaf Position.(DoD adoptedD 2843- Standiwd Test Method for Density of Smoke from the Burntng orDecomposition of Plastics. DoD adoptedD 4802- Standard SpecUlcatlon for Poly (Methyl Methacrylate) AcrylicPlastic Sheet.Application

22、 for copies should be addressed to the American Society for Testing andMateriaIs, 1916 Race Street, Phffadelphia, PA 19103.1AMERfCAN WELDING SOCIETY (AWSIWHB - Weldlng Handbook.Application for copies should be addressed to the American Welding Society. Inc 55oN.W. LeJeune Road, P.O. Box 351040, Miam

23、i. FL 33135. )ILLUMINATION ENGINEERING SOCIETY OF NORTH AMERfCA (lESGeneral Guide to Photometry. a71Application for copies should be addressed to the IUumfnaUon Engineering Society ofNorth America. 345 East 47th Smeet, New York, NY 10017. )UNDERWRITERS LABOIWTORfES ULIUL-486 - UL Standard for Safety

24、 Wire Connectors and Soldering Lugs forUse with Copper Conductors.UL-496 - UL Standard for Safety Edison-Base Lampholders. (DoD adopted)UL-542 - UL Standard for Safety Lampholders. Starters. and Starter Holdersfor Fluorescent Lamps. DoD adopted)(Application for copies should be addressed to the Unde

25、rwriters Laboratories, Inc., 333Ptlngsten Road, Northbrook. IL 60062.12.4 . In the event of a conflict between the text of this documentand the references cited herelrr except for specfflcauon sheets, the text of this documentties precedence. Nothing in this document. however, supersedes applicable

26、laws andregulations urdess a specific exemption has been obtained.3. REQUIREMENTS3.1 . The Indlvlduat item requirements shafl be as specified herebrand in accordance with the applicable speclflcauon sheet. In the event of any confllct betweenthe requirements of thfs specification and the specificati

27、on sheet, the latter shall govern. a714Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a71MIL-DTL-16377H(SH)3.2 article. When specified (see 6.21. a sample shall be subjected to ffrst atlcleinspection in accordance wtth 4.3.3.3 . s A prerequisite to

28、submission of the first article for inspectionshall be evtdence satisfactory to the contracting activity that the Naval S= Systems Command(NAVSEAI (see 6.61 has revtewed ad accepted the msnufacring drawtngs for the ure.light, or p=t to be furnished under this specification (see appendix A).3.4 MaWla

29、lS.3.4.1 ts. The materials used in the construction of the tlxtures orparta shall be as specified herein and of a type, class. form. and grade which 1sreadilyavatfable from normal sources of supply without the necessity for additional tieatrnent orprocessing other than that which is normal to. or re

30、adily supplied by. the industry. Thecontractor shall ascertain compliance of all materiafs with the rninlrnum requirements andsuitability of each material for its specific use and for the service tntended. Material require-ments fall into three generat categories as specified hereinafter.3.4.1.1 gjn

31、eciflc XM quantity of fixtures from each lot In accordance with table IV andexarntne them as specffled in 4.6. Detection of any nonconforming characteristic in anysample shall result in the rejection of the entire lot. The contractor has the optton ofscreening 100 percent of the lot for the defectiv

32、e characteristic(s) or provtdlng a new lot whichshall be inspected tn accordance wtth the sampling plan contained herein.4.5 . Fixtures, Ilghts, or p=ts shall be examined as specified tn 4.5.1 and4.5.2.4.5.1 .listed in table V, as applicable.Fixtures, lights, or pats shall be examined for the defect

33、sI29Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-16377H(SH)TLE V. .Examine DefectFinish Finish not as specffled: blistered, peeled,chipped, or area of no film.Color not as specified.Materials MaterlsJs not as specilled.Construction and wor

34、kmanship, general Part rrdssing. ftactured, spilt, punctured,(applicable to all parts and assemblies) dented. deteriorated. Not in properalinement. Sharp burr or edge, silver orsplinter.Welding and brazing (where applicable Missing, incomplete, burn holes, cracked,r?actured, or otherwise not fused,

35、slagtnciusion. slight undercut, not smooth anduniform. scale or flux deposits notremoved.Soldering (when appUcable) Missing, not adherent or incomplete. Notclean flux or flux residue not removed: notsmooth (surface not finished neatly), orpinholes in solder.Bolts, nuts, screws, studs, pads, rivets,

36、and Missing, broken, stripped, fractured, loose,other types of fasteners bent, not peened or insufficiently peened.Electrical assembly Comections at screw terminals arrd spliceconnection not as specffled. Wiring notproperly jotned. loose at terminal, or notenclosed in specitled conduit whererequired

37、.Adequate slack not provided for wiring torelieve simltn or excessive insuiattonstripped from wiring.Gaskets (where applicable Not coated where required, missing, not asspecified.Marking for identification Missing, incomplete. not legible.Instruction manual, tag. or sheet where Missing, incomplete,

38、not legible.applicable45.2 . F- M&k or P* shw beexarnlned to determine compliance with weight and dimensional requirements. Weights ordimensions not within specffled tolerances shall be ciassffled a defect.4.6 ance tests. Firrtures, lights, or parts shall be subjected to the testsspectfled in 4.6.1 through 4.6.3.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-