NAVY MIL-E-16298 D-1989 ELECTRIC MACHINES HAVING ROTATING PARTS ACCESSORIES AND ASSOCIATED SUPPORT ITEMS PACKAGING OF《电器所带回转部分和附件和相关支撑体统》.pdf

1、7 March 1989 SUPERSEDING 28 February 1964 (See 6.9) MIL-E-16298C MILITARY SPECIFICATION ELECTRIC MACHINES HAVING ROTATING PARTS, ACCESSORIES AND ASSOCIATED SUPPORT ITEMS: PACKAGING OF This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Sc

2、ope. This specification covers the packaging (preservation, packing and marking) requirements for motors, generators, motor-generators, dynamotors, rotary converters, rotary inverters, rotary frequency changers, electrical starters, and similar rotating electric equipment accessories and support ite

3、ms (spares, repair parts and tools). It does not cover such requirements for synchros and servo motors. Although primarily intended for unmounted machines, this specification may also be used for electric machines attached to prime movers, driven auxiliaries, or other electric machines. 1.2 Classifi

4、cation. Packaging shall be of the following levels of pro- tection as specified (see 6.2.1). (a) Preservation Level A (see 3.7.1.1) Level C (see 3.7.1.2) Commercial (see 3.7.1.3) (b) Packin% Level A (see 3.7.2.3) Level B (see 3.72.3) Level C (see 3.7.2.3) Commercial (see 3.7.2.6) Beneficial comments

5、 (recommendations, additions, deletions) and any pertinent data whichmay be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy, Washington, DC 20362-5101 by using the self-addressed Standardization Document Improvement Pro

6、posal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A AREA PACK DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited THIS DOCUMENT CONTAINS PAGES. 7. o_ I 1- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

7、IHS-,-,-MIL-E-Lb7D PA 7779706 02L57 5 W MIL-E-16298D 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2,l.l Specifications and standards. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these docu

8、ments shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. SPECIFICATIONS FEDERAL L-P-378 P-D-680 TT- T- 291 UU-P-268 PPP-B- 566 PPP-B-576 PPP - B - 585 PPP-B-591 PPP - B- 601 PPP-B-621 PPP -

9、 B - 6 36 PPP - B - 640 PPP - B - 665 PPP-B-676 PPP-B-1055 PPP-B-1672 PPP- c - 795 PPP- C- 843 PPP-C-850 PPP-c-1120 PPP-c-1752 PPP-(3-1797 PPP-C-1842 PPP-F-320 PPP-P- 40 PPP- P - 291 PPP-T-60 - Plastic Sheet and Strip, Thin Gauge, Polyolefin. - Dry Cleaning Solvent. - Thinner, Paint, Mineral Spirits

10、, Regular and - Paper, Kraft, Wrapping. - Boxes, Folding, Paperboard. - Boxes, Wood, Cleated, Veneer, Paper Overlaid. - Boxes, Wood, Wirebound. - Boxes, Shipping, Fiberboard, Wood-Cleated. - Boxes, Wood, Cleated-Plywood. - Boxes, Wood, Nailed and Lock-Corner. - Boxes, Shipping, Fiberboard. - Boxes,

11、Fiberboard, Corrugated, Triple-Wall. - Boxes: Paperboard, Metal Edged and Components. - Boxes, Setup. - Barrier Material, Waterproofed, Flexible. - Boxes, Shipping, Reusable with Cushioning. - Cushioning Material, Packaging (Flexible Cellular, Plastic Film) for Packaging Applications. - Cushioning M

12、aterial, Cellulosic. - Cushioning Material, Polystyrene, Expanded, Resilient (For Packaging Uses). - Cushioning Material, Uncompressed Bound Fiber for Packaging, - Cushioning Material, Packaging, (Unicellular Polyethylene Foam, Flexible). - Cushioning Material, Resilient, Low Density, Unicellular, P

13、olypropylene Foam. - Cushioning Material, Plastic, Open Cell (For Pack- aging Applications), - Fiberboard; Corrugated and Solid, Sheet Stock (Container Grade), and Cut Shapes. - Preservation and Packing of Hand Tools; Tools and Tool Accessories for Power Driven, Metal and Woodworking Machinery. Odor

14、less. - Paperboard, Wrapping and Cushioning. - Tape: Packaging, Waterproof. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-L MIL-E-Lh278D PA W 7797706 O283860 3 W MIL-E-16298D MILITARY MIL-C-104 - Crates, Wood; Lumber and Plywood Sheathed, Nailed

15、MIL-P-116 - Preservation, Methods of. MIL-B-121 - Barrier Material, Greaseproofed, Waterproofed, Flexible. MIL-B-131 - Barrier Materials, Watervaporproof, Greaseproof, Flexible, Heat-Sealable. MIL-R-196 - Repair Parts, Accessories, and Kits, Mechanical; Packaging of. MIL-B-197 - Bearings, Antifricti

16、on; Associated Parts and Subassemblies; Preparation for Delivery of. and Bolted. - MIL-B-233 - Boxes, Supply Support Items, Stowage and Storage. . Filler or Cushioning Pads), MIL-E-2036 - Enclosures for Electric and Electronic Equipment. MIL-B-3106 - Board, Composition, Water-Resistant, Solid (For M

17、IL-D-3464 - Desiccants, Activated, Bagged, Packaging Use and MIL-C-3774 - Crates, Wood; Open 12,000- and 16,000-Pound MIL-C-3955 - Cans, Composite, Spirally Wound. MIL-R-5001 - Rubber Cellular Sheet, Molded and Hand Built Shapes; MIL-R-6130 - Rubber, Cellular, Chemically Blown. MIL-1-8574 - Inhibito

18、rs, Corrosion, Volatile, Utilization of. MIL-C-9897 - Crates, Slotted Angle, Steel or Aluminum, For Light- Static Dehumidification, Capacity, Latex Foam. weight Airframe Components and Bulky Item (For Maximum Loads of 3000 Pounds). MIL-C-15074 - Corrosion Preventive, Fingerprint Remover. MIL-E-17555

19、 - Electronic and Electrical Equipment, Accessories, and Provisioned Items (Repair Parts): Packaging of. MIL-P-17667 - Paper, Wrapping, Chemically Neutral (Non-Corrosive), MIL-L-19140 - Lumber and Plywood, Fire-Retardant Treated. MIL-P-19644 - Plastic Molding Material (Polystyrene Foam, Expanded MIL

20、-R-20092 - Rubber or Plastic Sheets and Assembled and Molded MIL-B-22019 - Barrier Materials, Transparent, Flexible, Sealable, MIL-B-22020 - Bags, Transparent, Flexible, Sealable, Volatile MIL-B-22191 - Barrier Materials, Transparent, Flexible, Heat MIL-A-25175 - Air Transport, Nontactical, Packing

21、for. MIL-P-26514 - Polyurethane Foam, Rigid or Flexible, For Packaging. MIL-(3-26861 - Cushioning Material, Resilient Type, General. MIL-C-52950 - Crates, Wood, Open and Covered. MIL-(3-58104 - Cover, Protective, for Parts and Equipment. MIL-F-81334 - Foam, Plastic, Flexible, Open Cell Polyester Typ

22、e, MIL-F-87090 - Foam, Combustion Retardant, for Cushioning Supply m. -Bead). Shapes, Synthetic, Foam or Sponge, Open Cell. Volatile Corrosion Inhibitor Treated. Corrosion Inhibitor Treated, Sealable. Polyurethane. Items Aboard Navy Ships. 3 Provided by IHSNot for ResaleNo reproduction or networking

23、 permitted without license from IHS-,-,-MIL-E-16298D STANDARDS FEDERAL FED-STD-313 - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities. MILITARY MIL-STD-105 MIL- STD- 108 MIL-STD-129 MIL-STD-740-1 MIL-STD-740-2 MIL-STD-758 MIL-STD-

24、1186 MIL-STD-1367 MS20003 (Cop-es of specif - Sampling Procedures and Tables for Inspection by - Definitions of and Basic Requirements for - Marking for Shipment and Storage. - Airborne Sound Measurements and Acceptance Criteria of Shipboard Equipment. - Structureborne Vibratory Acceleration Measure

25、ments and Acceptance Criteria of Shipboard Equipment. - Packaging Procedures for Submarine Repair Parts. - Cushioning, Anchoring, Bracing, Blocking and Waterproofing; with Appropriate Test Methods. - Packaging, Handling, Storage, and Transportability Program Requirements (For Systems and Equipments)

26、. Areas (Cobaltous Chloride). Attributes. Enclosures for Electric and Electronic Equipment. - Indicator, Humidity, Card, Three Spot, Impregnated cations and standards required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as dire

27、cted by the contracting activity.) 2.2 Other Dublications. The following documents form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted shall be those listed in the issue of the DoDISS specified in the solicit

28、ation. issues of documents not listed in the DoDISS shall be the issue of the nongovernment documents which is current on the date of the solicitation. Unless otherwise specified, the AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 996 - Standard Terminology of Packaging and Distribution D 3951

29、- Standard Practice for Commercial Packaging. (DoD adopted) Environments. (DoD adopted) (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Nongovernment standards and other publications are normally available fro

30、m the organizations which prepare or which distribute the documents. ments also may be available in or through libraries or other informational services.) These docu- 2.3 Order of precedence. When an equipment or item is acquired in con- formance with a commodity specification, having detailed packa

31、ging or preparation for delivery requirements which differ from this specification, the packaging or preparation for delivery specified in the commodity specification shall apply. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I - flIL-E-Lb278D PA 7

32、779706 0281862 5 MIL-E-16298D c- 3. REQUIREMENTS 3.1 Definitions or exDlanation of Dackaging - terms. Definitions or expla- nation of packaging terms applicable to this specification shall be as stated in the applicable referenced specification and in 6.5. For definitions or explanation of packaging

33、 terms not specified therein, ASTM D 996 shall apply. 3.2 First article inspection. When specified in the contract or purchase order, a sample shall be subjected to first article inspection (see 4.4 and 6.3). 3.3 Materials. Packaging materials shall be as specified herein. 3.3.1 Recovered materials.

34、 Unless otherwise specified herein, all equip- ment, material, and articles incorporated in the products covered by this speci- fication shall be new and may be fabricated using materials produced from recovered materials intended use. The term “recovered materials! means materials which have been c

35、ollected or recovered from solid waste and reprocessed to become a source of raw materials, as opposed to virgin raw materials. interpreted to mean that the use of used or rebuilt products is allowed under this specification unless otherwise specifically specified. ?. to the maximum extent practicab

36、le without jeopardizing the None of the above shall be 3.3.2 New materials. The use of newly developed packaging materials or procedures is encouraged and recommended and will be permitted under the conditions specified herein, provided they are equal to or better than the specified materials or pro

37、cedures and incur no additional cost to the Government (see 6.2.2). 3.3.3 Asbestos. 3.3.3.1 Packaging materials. Asbestos or material and items containing asbestos shall not be used as a packaging material. 3.3.3.2 Packaged material. Asbestos and separately packaged components containing asbestos th

38、at is predominately distributed throughout the item, shall be packaged in sealed, dust and sift-proof packages. Flexible packages shall be heat sealed. All packages shall be marked (see 3.7.3). 3.3.3.3 Dusting material. The dusting materials used in the packaging process (for example, talc and talcu

39、m) shall be asbestos free (see 6.2.2): 3.3.4 Void fill materials. The use of excelsior, newspaper, shredded paper (all types) and similar hygroscopic or nonneutral materials and all types of loose fill materials, for applications such as cushioning, fill, stuffing, and dunnage shall be prohibited. 3

40、.3.5 Navy fire-retardant materials. 3.3.5.1 Lumber and plywood. Unless otherwise specified (see 6.2.1), all lumber and plywood including laminated veneer material used in shipping container and pallet construction, members, blocking, bracing, and reinforcing shall be fire-retardant treated material

41、conforming to MIL-L-19140 as follows: 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ - - MIL-E-Lb278D PA 7777706 028Lb3 MIL-E-16298D Level A and B - Type II - weather resistant. Level C - Type I - non-weather resistant. Category 1 - general use.

42、 Category 1 - general use. 3.3.5.2 Fiberboard. Fiberboard used in the construction of class-domestic, noncweather resistant fiberboard, and cleated fiberboard boxes shall meet the flame spread index and the specific optic density requirements of PPP-F-320 and amendments thereto. 3.3.5.3 Cushioning a

43、nd wraming. Materials selected for cushioning and wrapping shall have properties (characteristics) resistant to fire (see 3.7.1.1.3). 3.4 Packaging. - handling. storage and transportability plan (PHST). When required (see 6.2.1), the system or equipment acquisition or program manager shall establish

44、 the PHST requirement. applicable system or equipment acquisition in accordance with MIL-STD-1367. The plan shall be tailored to the 3.4.1 Material safetv data sheet. For items containing a hazardous material, the contracting activity shall be provided a material safety data sh -t (MSDS) at the time

45、 of contract award. The MSDS shall be provided in accordance with FED-STD-313 (see 6.7). The MSDS shall be included with each shipment of any hazardous material. 3.5 Disassembly and matchmarking. 3.5.1 Disassembly. Machines shall not be disconnected from prime movers, gear trains, chain drives, bedp

46、lates, or driven auxiliaries, or in any way disassembled for shipment, except where the excessive size of the machine involved dictates that partial disassembly is necessary for the purpose of pro- cessing in accordance with table.1. If partial disassembly is necessary, preservation of parts shall b

47、e accomplished in accordance with table II for items listed therein, and 3.5.2. I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Machine encosure2/ Oil filled Oil proof Submersible Blower-cooled Blower - ventilated Dripproof tected igni t i

48、onpro o f Explosionproof Explosionproof Floodtight Forced-air Forced-air Open Prtected Spraytight Sprayt i gh t fan - Totally enclosed Totally enclosed fan-cooled Water-cooled Water - air - cooled Water-hydrogen- Watertight Watertight fan- Dripproof pro- Dust- fan-cooled cooled ventilated cooled coo

49、led cooled - i/ In the case of motor driven generators or other directly connected machines, 2/ In accordance with- MIL-STD-108 and MIL-E-2036, class 2. 3/ In accordance with MIL-P-116. , these weights apply to the assembled unit, not merely the individual motor or other electric machines. Preservation of electrical machinerv having rotating Darts. - Cleaning Method of We ightu proc e s s3/ Preservative su preservationY Al 1 III c-1