NAVY MIL-HDBK-2189-1999 DESIGN METHODS FOR NAVAL SHIPBOARD SYSTEMS《海军军舰系统设计方法》.pdf

1、NOTE: MIL-STD-2189(SH) has been redesignated as a handbook, and is to be usedfor guidance only. This document is no longer to be cited as a requirement.For administrative expediency, the only physical change from MIL-STD-2189(SH)is this cover page. If cited as a requirement, contractors may disregar

2、d therequirements of this document and interpret its contents only as guidance.AMSC N/A FSC 1990DISTRIBUTION STATEMENT A. Approved for public release; distribution isunlimited.INCH-POUNDMIL-HDBK-2189(SH)11 March 1999SUPERSEDINGMIL-STD-2189(SH)13 November 1987MILITARY HANDBOOKDESIGN METHODS FOR NAVAL

3、 SHIPBOARD SYSTEMSProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-2189(SH)13 November 1987, DEPARTMENT OF THE NAVYNAVAL SEA SYSTEMS COMMANDWashington, DC 20362-5101Design Methods for Naval Shipboard Systems1. This Military Standard is approve

4、d for use by the Department of theNavy and is available for use by all Departments and Agencies of the Departmentof Defense.2, Beneficial comments (recommendations, additions, deletions) and anypertinent data which may be of use in improving this document should beaddressed to: Commander, Naval Sea

5、Systems Command, SEA 55Z3, Department ofthe Navy, Washington, DC 20362-5101 by using the self-addressed StandardizationDocument Improvement Proposal (DD Form 1426) appearing at the end of thisdocument or by letter.iiIIIProvided by IHSNot for ResaleNo reproduction or networking permitted without lice

6、nse from IHS-,-,-MIL-STD-2189(SH)13 November 1987III!iIPurDose. The purpose of this standard and the supporting sections is toprovide textbook-type information and guidance for use in the design andconstruction of ships. The supporting sections illustrate typical design andcalculation methods and pr

7、ocedures which are acceptable to the Government.ackround. The need for standardized ship design methods and procedures hasbecome apparent as ships and their equipment have grown more complex. Previ-ously an internal Design Data Book consisting of individual design data shietswas used to compile desi

8、gn methods and procedures applicable to the Navy. Thisstandard extends that concept and provides ready access to those involved inNaval ship design.Desizn. System and equipment design present the engineer with complex andunique problems. Many methods and design procedures exist which may be used ind

9、esigning a given system or equipment. The intent of this standard is toestablish the methods and procedures which the Navy will accept as valid. Adesigner employing these methods and procedures will have his work consideredacceptable from the standpoint of form and method. This is not to imply thato

10、ther a75ethods and procedures are not acceptable to the Navy, but the burden ofproof resides with the contractor.ConceDt. This standard will be developed in depth over a period of timethrough the medium of supporting sections to cover the spectrum of ship designmethods and procedures. Such sections

11、will be issued as they are prepared.Each section will be self-sufficient in technical coverage, They a75ust beapplied, however, in consideration of how they are invoked in an acquisition,Generally, they will be invoked as an acceptable method or procedure indesigning a system or equipment. In some i

12、nstances they may be invoked asmandatory requirements.IIiiiProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-IHIL-STD-2189(SH)13 November 1987I1Paragraph 1,1.11.21.32.2.12.23,3.14,4.1L.1.l4.1.25.5.16.6,1L9“.4CONTENTSGENERAL, SCOPE, AND APPLICABILITY.Ge

13、neral.”s”.”.”Scopes.ApplicabilityREFERENCED DcKuMmTs. . . . . . . . . . . . . . . . . . . . ., .,”Government publications Order of precedence.,., DEFINITIONS.Ship design metho& GENERAL REQUIREMENTSApplication.”Invoking standardDesign methods not covered.DETAILED REQUIS .Relationship to Expanded Ship

14、 Work BreakdownStructure (ESUBS).NOTES”Intended use.j rn-rv?scip.gS.& et e= -Jm1111“1122222222iivProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-2189(SH)13 November 19871. GENERAL, SCOPE, AND APPLICABILITY1.1 General. This standard consists o

15、f a general basic document andsupporting sections. Each section addresses a specific desi selection orcalculation method or procedure applicable to ship systems or equipment. Whenusing these methods and calculations, the section which addresses the par-ticular design and MIL-STD-2189document.1.2 S_c

16、oe. This standardfollowing:(a) Standard methodsshall be considered as an integrel singleestablishes, as applicable, one or more of theof calculation, and presentation of methodsuseful in the design of Naval ships.-(b) Design standards for those systems or equipment which are inaccordance with Naval

17、practice.(c) Standards to permit investigation and comparison of ship, systemand equipment designs submitted by various contractors.(d) Background information and general concepts applicable to Navalship design and construction.1.3 Armlicability. The methods and procedures specified in the supportse

18、ctions are considered valid and acceptable to the Navy for their respectiveapplications.2. REFERENCED DOCUMENTS2.1 oveent Dublications. The following Government publications forma part of this standard to the extent specified herein.PUBLICATIONSNAVAL SEA SYSTEMS COMMAND (NAVSEA)59040-AA-IDX-010/SWBS

19、 5D Vol. 1 - Expanded Ship Work BreakdownStructure for All Ships zndShip/Combat Systems (EShF3S).S9040-AA-IDX-020/SWBS 5D Vol. 2 - Users Guide for Expanded ShipWork Breakdown Structure forAll Ships and Ship/CombatSysterns.(Copies of publications required by contractors in connection with specificacq

20、uisition functions should be obtained from the contracting activity or asdirected by the contracting officer.)2.2 Order Of D recedence. In the event of a conflict between the text ofthis standard and the references cited herein, the text of this standard shalltake precedence.Provided by IHSNot for R

21、esaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-2189(SH)13 November 19871II3. I)EFINITIUNS3.1 . Ship design methods are textbook typeinformation and guidance for use in the design and construction of ships whichillustrate typical design and calculation methods and p

22、rocedures acceptable tothe Government.4. GENERAL REQUIREKES4.1 Alcation. This standard applies to all activities involved inship and equipment design, construction and installation and requires thatconsideration be given to use of its methods and procedures by such activities.4.1.1 Invokinp standard

23、. While the use of this standard is notmandatory, it shall be considered when specifying ship design requirements.Requirements shall be carefully considered by all ship design activitiesinvolved in ship construction, modernization and conversion throughou: theentire ship life cycle. Other methods or

24、 procedures shall be specified onlywhere it can be shown that such methods and procedures are clearly moreappropriate for a given.application.4.1.2 J)esiznmethods not covered. Design activities, in consonance wiz:.the objectives of this standard, shall establish a dialogue in a timely marine=which w

25、ill establish acceptable design methods and procedures in areas notcovered by this standard.5. DETAILED R-QUIREMENIS5.1 Relationship to EXDanded ShiD Work Breakdown Structure ES%Sm . l-r.=ESWBS, NAVSEA S9040-AA-IDX-010/SWBS SD, is a two-digit expansion of zhe form=NAVSEA Ship Work Breakdown Structur

26、e (SWBS). The SWBS was promulgated toprovide a single language for the diverse areas of endeavor associated withshipbuilding through the entire ship life cycle from early design and coststudies through production and subsequent Iayup. This includes such areas ascost, weight, specifications, system f

27、unction and effectiveness, design,production and maintenance. The ESWBS consists of a structural S-digit nume:icsystem. Sections of MIL-STD-2189 will be identified by the first 3-digits C:the ESWBSnumber corresponding with the primary design element under considera-tion. In cases where various aspec

28、ts of the same subject are addressed,sections will be designated as section XXX Part 1, 2, and so forth.section covers several ESWBS elements such sections will be numberedgroup or even the group level.6. NOTES6.1 Intended use. This standard is used to specify acceptableprocedures and calculations f

29、or design of ship systems.methods2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-III!MIL-sTD-2189(SH)13 November 19876.2. $ublect term (k Ye word) 11stin.Calculation methodsShip constructionShip conversionShip modernizationPreparing activity:Navy -

30、SH(Project 1990-N055)IProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-IiIWANDARDIZATKXU DOCWENT IMPROVEMENT PROPOSAL(SeeInmuctbtu - Rowic Side)WCUUENT NUMDER 2. 00cuMENT TITLEiIL.-STD-2l89 (SH) DESIGN METHODSFOR NAVALSHIPBOARD SYSTEMSMA ME OF S(MMJ T

31、TINO ORGAN IUTKW4 & TWE Of OnOANIZATmN fm OUa75VR?400”D -“hODREW&ut. C?My,8M$a.=? C*)c1 NANUPA=UREna75 OTHER ,PROCLEM AnEASa71 ?arm NuMr MW WOdq:h nuommaidd Wwq :C. netndonata tw mion:RCMRKSa. NAME W SWIMITTER kc Fht. Mf) - Oor!d & WORK TC LEPHOM NUMCC n (lnA& AmcOA)-ooe41. MAt LINO AOORESS tStu#f. ClfY, #ti&, 2!? Cd#J - Ovt+md 8. DATE OF SUSMt8B10N (YYMMDD)-. .&-a71ntVIOUE EOIT!ONm +%OLITE.IProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-