NAVY MIL-I-7906 A-1961 INDICATOR GYRO HORIZON MANUALLY CAGED ELECTRIC TYPE MB-1《MB-1型号电动笼手动陀螺视野指示器》.pdf

1、15 JUNE 1961 s U P E R SE D I N o MIL-1-7906 (AER) 21 JULY 1952 MILITARY SPECIFICA TION INDICATOR, GYRO HORIZON, MANUALLY CAGED, ELECTRIC, TYPE MB-1 This specification has been approved by the Bureau of Naval Weapons, Department of the Navy. 1. SCOPE 1.1 Scope - This specification covers certain des

2、ign and all performance requirements for electric, manually caged, gyro horizon indicators. 1.2 Classification - This specification covers one type of gyro horizon indicator designated as Type MB-1. 2. APPLICABLE DOCUMENTS 2.1 General - The following specifications, standards ar i publications of th

3、e issue in effect on the date of invitation for bids, form a part of this specification to the extent specified herein. SPECIFICATIONS Federal QQ-N- 290 Nickel Plating (Electrodeposited) QQ-C-320 Chromium Plating (Electrodeposited) QQ-P-416 Plating, Cadmium (Electrodeposited) DD-G-451 Glass, Flat an

4、d Corrugated for Glazing, Mirrors and other Uses Militarv MIL-P-116 Preservation, Method of MIL-N-3336 MlL-C- 501 5 MlL-E-5272 Environmental Testing, Aeronautical and Nut, Self Locking, Instrument Mounting Connectors, Electric, “AN“ Type Associated Equipment, General Specification for MIL-1-6181 Int

5、erference, Control Requirements, Aircraft Equipment L- / THIS DOCUMENT CONTAINS /(o PAGES. , -. 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-7906A (WEP) I MIL-L-6880 MIL - S- 774 2 MIL-P-7936 MIL-A-8625 MIL-D-70327 STANDARDS Federal FED-ST

6、D-595 Military MIL-STD-143 MS 33558 MS 33586 MS 17313 Lubrication of Aircraft, General Specification for Screw Threads, Standard, Aeronautical Parts and Equipment, Aeronautical, Preparation for Delivery Anodic Coatings, for Aluminum and Aluminum Alloys Drawings, Engineering and Associated Lists Colo

7、rs Specifications and Standards, Order of Precedence for the Selection of Numerals and Letters, Aircraft Instrument Dial, Standard Form of Metals, Definition of Dissimilar Inccator-Gyro Horizon, Electric, Type MB-1 2.2 Availability of Documents When requesting any of the applicable documents refer t

8、o both title and number, Copies of this specification and applicable documents may be obtained upon application to the Commanding Officer, Naval Supply Depot, Code CDS, 5801 Tabor Avenue, Philadelphia 20, Pennsylvania, 3, REQUIREMENTS 3.1 Qualification - The gyro horizon indicator furnished under th

9、is speci- fication shaii be a product which has been tested, and has passed the qualification tests specified herein, and has been listed on, or approved for listing on, the applicable qualified products list, Selection of Government Documents - Specifications and standards for necessary commodities

10、 and services not specified herein shall be selected in accordance with MIL-STD-143 except as provided in 3.2.1 and 3.2.2. be used where, on the date of invitation for bids, there are no suitable standard parts, In any case, commercial utility parts, like screws, bolts, nuts, cotter pins, having sui

11、table properties, 3.2 3.2.1 Commercial Parts - Commercial parts having suitable properties may may be used provided: O a. They can be replaced by the standard parts (MS or AN) without alteration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-I-

12、770bA bb U 7777906 OL2b55L 3 mK -. MIL-I-7906A (WEP) b. The corresponding standard part numbers are referenced in the parts list and, if practicable, on the contractors drawings. 3.2.2 Standard Parts - With the exception of 3.2.1, MS and AN standard parts shall be used where they suit the purpose. T

13、hey shall be identified on the drawings by their part numbers. 3.3 Materials - Materials shall conform to applicable specifications and shall be as specified herein. Materials for which there are no applicable specifications, or which are not specifically described herein, shall be of the best quali

14、ty, of the lightest practicable weight, and suitable for the purpose intended. 3.3.1 Critical Materials - Noncritical materials shall be used where practic- able. Where the use of a critical material is essential to meet specification requirements, the material used shall be the least critical of th

15、ose which are adequate for the purpose. 3.3.2 Metals - Metals shall be of the corrosion-resistant type, or shall be suitable protected as specified herein to resist corrosion due to salt spray or atmospheric conditions to which the instrument may be subject when in storage or during normal service l

16、ife. 3.3.2.1 Dissimilar Metals - Unless suitably protected against electrolytic corrosion, dissimilar metals as defined in MS 33586 shall not be used in intimate contact with each other. 3.3.3 Nonmagnetic Materials - Nonmagnetic materials shall be used for all parts of the instrument except where ma

17、gnetic materials are essential. 3.3.4 Fungus-Proof Materials - Materials which are nutrients for fungi shall not be used where it is practicable to avoid them. Where used and not hermetically sealed they shall be treated with a fungicidal agent acceptable to the Bureau of Naval Weapons: 3.4 the atti

18、tude of an airplane throughout all maneuvers and to permit loops and rolls to be made without tumbling the gyro. The indicator shall incorporate a device for sensitive indications in pitch and a means to prevent fogging on the surfaces of the cover glass under extremes of atmos- pheric conditions. T

19、he means provided shall be subject to approval by the Bureau of Naval Weapons. The design shall be reasonably simple, to permit overhaul or repair without requiring numerous special tools and fixtures. The indicator shall be constructed to withstand the normal strains, jars, vibrations, and such oth

20、er conditions as are incident to shipping, storage, installation and services. Design and Construction - The indicator shall be designed to indicate 3.4.1 Case - The indicator case shall conform to MS 17313 . It shall be made of aluminum alloy uniform in texture, have a smooth surface and shall be s

21、uitably pro- tected against the infiltration of dust and sand particles. .The bezel ring on the front of the case shall be held in place by means of screws and by its removal the cover glass shall be replaceable. The case shaii be suitable for front or rear mounting on an instrument panel. The case

22、shall be finished with a durable lusterless black finish, Color No. 37038 of FED-STD-595. 3.4.2 Gyro Parts - The gyro parts shall be mounted so that the instrument cover may be removed without disturbing the adjustments. 3.4.3 Erection Device - The instrument shall incorporate an erection device to

23、maintain the gyro in its-neutral position when running. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ _ - - - - _ - - MIL-I-7706A bb 7779706 0326552 5 W MIL-I-7906A(WEP) 3.4.4 Caging Device - A caging device shall be incorporated into the indic

24、ator and shall be an integral part thereof, The mechanism shall be constructed so that the gyro may be caged manually at any time from any indication and returned to straight and level flight indication by means of mechanical levers, This mechanism shall be self-retracting. Pitch Indications - The i

25、nstrument shall incorporate two separate indications in pitch, a horizon bar and a pitch scale, The horizon bar shall indicate the pitch attitude to not less than 25 degrees in climb and dive and the pitch scale shall indicate the pitch attitude within a range of from 10 to 80 degrees in climb and d

26、ive, Zero Pitch Adjustment - The indications of zero pitch shall 6e adjusted by means of an external knob within a minimum range of from 6 degrees nose down to 20 degrees now up from the normal position. The normal position with respect to the mounting lugs shall be suitably marked with an index. Ba

27、nk index - The indicator shall incorporate a bank index which shall not be affected by pitch deviations of the gyro, Turn Error Compensation - The indicator shall be compensated to maintain to a minimum the error in indication due to centrifugal force encountered in turn, Unless otherwise approved b

28、y the Bureau of Naval Weapons, the method of compensation shall consist of inclining the top of the spin axis of the gyro toward the direction of flight. from the indicator case, with Specification MIL-(2-5015 except that the connector.used may have the mounting flange contour modified if required f

29、or mounting considerations, indicate when phase rotation is incorrect or when power failure occurs, 3.4*5 3.4.5,l 3.4.6 3.4.7 3.4.8 Wiring - The complete electrical wiring system shall be insulated Electrical Connector - The electrical connector shall be in accordance 3.4.8.1 3.4.8.2 Flag Alarm - A

30、warning device shall be incorporated which will 3.4.9 Dial - 3.4.9,l Cover Glass - The quality of the cover glass shall be in accordance with Specification DD-(3-451, Type ZI, Quality AA, The cover glass shall be properly sealed to prevent fogging, 1/16 inch of the shortest graduations, and other sp

31、ecified markings on the dial shall be visible from any point within the frustum of a cone whose side makes an angle of 30 degrees with a perpendicular to the dial and whose small diameter is the aperture of the instrument case. be finished in a durable, lusterless black material of Color No, 37038 o

32、f FED-STD-595. The markings shown in Figure 1 in solid black shall be finished in a durable, lusterless white material of Color No. 37875 of FED-STD-595. The form of the letters and numerals on the dial shall conform to MS 33558 and the dimensions of the markings shall be as specified in Figure 1. M

33、aintenance - The design shall be such as to facilitate as much as pos- sible disassembly, repair or overhaul, service maintenance, and reassembly by those tools and items of maintenance equipment which are normally available as commercial standards, 3.4.9.2 Visibility of Dial - The horizon bar, bank

34、 index, numerals, at least 3.449.3 Markings - The background of the dial assembly of the indicator shall 3,4.10 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-/ MIL-I-770bA bb 7977706 OLZb553 7 r- -. - IEL-I-7906A (dEP) POWER - DIAL AS SEM BLY DIA

35、L MASK .oz0 J47 .I56 LETTERS and the fact that the Government may have formulated;. furnished or in any way supplied the said drawings, specifications, or other data is not to be regarded by implication or otherwise as in any manner licensing the holder or any other person or corporation, or conveying any rights or aermission to manufacture, use, or sell. any patented invention that may in any way be related Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-