NAVY MIL-M-18035 B-1964 MANUAL SUPPLEMENTAL SPECIAL WEAPONS《特殊武器的手动补充条例》.pdf

1、q7-23 MIL-M-l803SB(Wep) 12 Februar; 196L Superseding MIL-H-l8035A( Aer ) 19 March 1959 MILITARY SPECIFICATION MANUAL: SUPPLEFENTAL; SPECIAL WEAPONS (This specification has been approved by the aireau of Naval Weapons, Department of the Navy) 1. SCOPE 1.1 Scope. - This specification prescribes the re

2、quirements for the prepara- tion ofaanual of loading and unloading procedures, operatlonal procedures, and maintenance instructions covering auxiliary armament systems and equip- ment for special weapon carrying aircraft. 1.2 mental to and used in conjunction with the NATOPS/Flight, Maintenance, Str

3、uctural Repair, Periodic Plaintenance Hequirements Manuals, Illustrated Parts Ereakdam and Weight and i3alance Handbooks for the aircraft, The manuals prepared tothis specification are intended to be supple- 1.3 ”here requirements of this specification conflict with requirements of general specifica

4、tions, the requirements of this specification shall apply. 1.4 This specification contains the following main parts: 1, SCOPE 2. APPLICABLE DOCUMENTS 3. REQUIREMENTS 3.1 Format 3.2 Arrangement of Manual h. QUALITY ASSURANCE PROVISIONS 5, PREPARATION FOR DELIVERY 6. NOTES Provided by IHSNot for Resal

5、eNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Control) condition, the operating

6、procedures and precautions prescribed in WAVdEPS 16-1-529 shall be complied withet1 3.1.8 Illustrations, - Illustrations shall be prepared in accordance with Specification MIL-H-547h and shall be used as necessary to support, supple- ment or clarify related text, When and where necessary to simplify

7、 or clarify the comprehensions of procedures, illustrations may be repeated in the manual. Wnere required, indications of exact locations of illustrated matter or position from which the illustration was made shall be made on the illustration or stated in the figure title. and wiring schematics shal

8、l be used where necessary to support, supplement or clarify manual information, 3.1.8.1 text. Every effort shall be made to have the illustration on the same page as the text or on the facing page to the text. typical oi basic illustration requirements for the manual, deletions shall be made as nece

9、ssary to accommodate the requirements of the particular aircraft, Simplified line drawings Illustrations will appear as closely as possible to the related The following.list is Additions and (a) Photographs of the special version aircraft - as many views as (b) Close-up view oi the special equipment

10、 installed, (c) Views of any special mounts, racks, etc., with equipment removed, (d) Views of any new access provisions, (e) Illfistration and identification of all controls for the special (f) Illustration and identification of equipment being used in load- (g) Schematic diagrams, are required to

11、show any special external features, equipment. ing and unloading operations, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_. MIL-M-le035 B(Wep) (h) Wiring diagrams in accordance with the specifications governing the corresponding aircraft maintena

12、nce instmction manual for aircraft wiring and for wiring peculiar to the special weapon carrying version, in- cluding interconnecting wiring diagrams for the special weapon electrical, electronic and wiring test equipment, 3.1.9 shall be furnished by the Procuring Activity as soon as requirements ar

13、e contractually established. to receipt of the security classification information. security classification higher than that established for the manual shall be included. Information of a higher classiTication considered to be essential shall be brought to the attention of the Procuring Activity. 3.

14、1.9.1 assigned classification shall be centered at top and bottom of each cls- sified page and its backing page. Security Classification, - The seciirity classiiication of the manual No information of a Reproducible copy Shall not be prepared prior Assigned Classification, - In accordance with MIL-H

15、-5474 the 3.1.9.2 those pages containing classified information shall show the classification. 3.1.9.2.1 Text. - Classified paragraphs and subparagraphs shall be marked (C) for Co-ntial and (S) for Secret, between the paragraph number and heading or start of text if there is no heading (For example:

16、 2= ar,y weight and balance data on special equipment and load items not covered in the handbook of weight and balance. Flight data such as variations in performance from that of the basic aircraft and new flight restrictidns will be covered in the confidential supplement to the NATOPS/Flight .Manua

17、l 3.2.8 3.2.8.1 This section shall describe, in step by step order, the procedures necessary to unload the special weapons carried. Section V - Ugloading Procedures 3.2,8.2 Arrangement of the section shall be in general accordance with Section III as speciyied in 3.2.6 thru 3.2.6.1.2. to the loading

18、 illustrations in Section III rather than repeating these illustrations . Reference may be made 3.2.9 Requirements. 3.2.9.1 The scope of infomation for this section shall be the same as that required by the specifications governing the maintenance instruction manual and periodic maintenance requirem

19、ents manual for the aircraft. Section VI - Maintenance Instructions and Periodic Faintenance - 3.2.9.2 “his section shall contain an introductory statement relating that (Insert publication number) , Maintenance Instructicn Kanual and (insert publication nymber) , Periodic Maintenance Requirements M

20、anual should be used for maintenance inTonnation and inspection instructions on all except the spebial equipment and peculiarities of the special version as called out under 3.2,5. 3,2.9.3 Typical information to be included in this section would be: installation, lubrication, and removal instruction

21、s for all special equip- ment; maintenance, and special tools required for maintenance of the special equipment (Gnless covered by separate handbooks of maintenance or service instructions) ; any periodic or special inspections to be accomplished in addition to those speiried in the basic periodic m

22、aintenance requirements 11 -=i- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-manual; interconnection composite wiring diagrams for additional electrical and electronic equipment; including test equipment, schematic diagrams for the aircraft wiring

23、 and the special electrical and electronic equipment not covered by an existing manual, The interconnection composite wiring diagrams shall show all test equipment hooked up to aircraft wiring. Loca- tion of all special equipment installed shall be indicated by illustration or text, switches, lights

24、, etc., shall be included in this category, Whenever possible related information on the above items in the same category are to appear together in sequence such as sequencing all wiring test composite drawings to follow one after tne other in this section, 3.2.9.4 When necessary this section shall

25、also state the troubles, de- ficiencies, and failures or faulty operation which may occur, the probable causes for such, and outline definite procedures for correction. section shall include not only troubles that are most likely to occur, but those of infrequent and complex nature shall also be inq

26、luded. A columnar or tabular arrangement of this information is preferred. columns headed llTroublefl, “Probable Causet1, and 1tCorrec4ion11 may be used, These tables should show the representative group of trqubles that most nearly occur on a frequent basis. Information shall be arranged in the ord

27、er of most likely occurrence, When the complete corrective action is too detailed or lengthy to be stated triefly, appropriate reference shall be made to other paragraphs such as lladjustment,tl 3.2e10 Items such as control boxes, test equipment, circuit breakers, This For examFle, Section VI1 - Ill

28、ustrated Parts Breakdown (when Bpplicable) 3.2,lO.l fied in Specification MIL-M-8910. The scope of inrormation requtred shal be the, same as that speci- 3.2.10.2 This section shall include only special weapon equipment which 5s not covered in the aircraftIllustrated Parts Breakdown. 4 , QUALITY ASSU

29、RANCE PROVISIONS 4.1 Methods oi inspection and approval for this manual shall be in accordance with Specification MIL-H-5474. * se PREPARATION FOR DELIVERY 5.1 Packaging, packing, and marking for shipment shall be in accordance with Specification MIL-H-5474 unless otherwise specified in the applicab

30、le contract. 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-6, MOTES - -. . -. 6.1 for use in providing the using activity with complete and detailed instsuc- tions for aircraft preparatLon, weapon loading, weapon delivery, weapon unloading, and

31、maintenance and servicing of equipment and parts peculiar to the special. weapons version of the aircraft. Intended Use. - Kanuals prepared to this spee5fPcation are hitendeci NCTICE: When Government drawings, specifications, cr other data are used for any purpose other than in connection with a def

32、initely related Government procurement operation, the United States Government thereby incurs no responsibility nor any obligation whatsoever; and the fact that the Govern- ment may have formulated, furnshed, or in any way supplied the said drawings, specification, or other data is not to be regarde

33、d by implication or otherwise as in any manner licens- ing the holder or any other person or corporation, or convey- ing any rights or permission to manufacture, use, or sell any patented invention that may in any way be related thereto, c - y- - A-._ - t Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-