NAVY MIL-M-24100 C-1991 MANUALS TECHNICAL FUNCTIONALLY ORIENTED MAINTENANCE MANUALS (FOMM) FOR ELECTRONIC ELECTROMECHANICAL AND ORDNANCE EQUIPMENT SYSTEMS AND PLATFORMS《注重功能维护电子机械系.pdf

1、MIL-M-24LOOC TM = 77777OIa 047b220 7 MIL-M-24100C 22 Februarv 1991 SUPERSEDING 2 January 1974 (See 6.7) MIL-M-24100B MILITARY SPECIFICATION MANUALS, TECHNICAL: FUNCTIONALLY ORIENTED AND ORDNANCE EQUIPMENT, SYSTEMS, AND PLATFORMS MAINTENANCE MANUALS (FOMM) FOR ELECTRONIC, ELECTROMECHANICAL, This spec

2、ification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Coverape. This specification sets forth the content and format requirements for Functionally Oriented Maintenance Manuals (FOMM) (see 6.5.7) and revisions (see 6.5.45), and changes thereto, neces

3、sary for the installation, operation, organizational-level (see 6.5.35), intermediate-level (see 6.5.26), and depot-level maintenance repair (see 6.5.42), and parts (see 6.5.38) support of equipment (see 6.5.12), systems (see 6.5.53), and subsystems (see 6.5.54), without the services of manufacturer

4、s representa- tives, Maintenance manuals are the fundamental operational and maintenance data base for the military operational and service forces, and are baseline documents for training of personnel. 1.1.1 Concept. The FOMM consists fundamentally of illustrations supported by narrative, vice narra

5、tive supported by illustrations as in conventional manuals, A FOMM is a complete operational and maintenance technical data base for the equipment or system it supports. disciplined manner that shows clearly the functional and physical relationships that exist in an equipment or system. FOMM manuals

6、 present data in a 1.1.1.1 diagrams, blocked schematics, with keyed text, and maintenance dependency charts (MDC). These illustrations use symbols and distinctively shaped line art blocks to convey maximum information in a minimum of space. FOMM illustrations consist of logically arranged functional

7、 block Beneficial comments (recommendations, additions, deletions) and any pert- tinent data which may be of use in improving this document should be addressed to the Commander, Naval Sea Systems Command, SEA 5523, Depart- ment of the Navy, Washington, DC 20362-5101 by using the self-addressed Stand

8、ardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC NJA FSC TMSS DISTRIBUTION STATEMENT A, Approved for public release; distribution is. unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

9、HS-,-,-MIL-M-24100C 1.1.1.2 relationships of systems and hardware. Demarcation between shadings provide psuedo-lines between functional levels and hardware assemblies such that they do not conflict or confuse the hard lines which represent the technical data presented on illustrtions by reducing clu

10、tter. comprehensive method for determinfng equipment and system performance status and give positive direction for fault isolation. Shading techniques are used to denote the physical and functional The MDCs provide a 1.1.2 ConceDtual obiectives. FOMM manuals are engineered to meet the following uniq

11、ue objectives: a. b. C. d. e. f. g. h. i. j. To provide a state-of-art technical manual that presents all information necessary to install, operate, maintain, and repair military equipment and systems in the most comprehensive and effective manner and to maximize the utilization of space and to prom

12、ote ease of use. To present all technical data with reliance on all pictorial information supported by minimum narrative that is keyed to the illustration such that only required descriptive information needs to be read. To present a troubleshooting concept that defines all parameters necessary for

13、proper operation (positive troubleshooting) such that any fault may be determined between its last,good indication and its first bad indication (as opposed to symptoms and potential problem determinations normally used in standard technical manuals). To utilize a diagramatic concept (dependency char

14、t) to assure that an equipment or system can be 100 percent checked out as functioning properly in all modes of operation through the exercise of all operating controls and switch positions. (This has normally not been possible in standard technical manuals through the use of signal flow block diagr

15、ams because of space limitations.) To simplify diagrams by using a shading technique to denote hardware without hard lines that conflict with or confuse circuitry or signal flow. To present all information in a manner that a technician will normally troubleshoot, diagnose, and isolate potential prob

16、lems. To eliminate foldouts, by employing a two facing page landscape concept that provides up to 11 by 33 inches of data, because of their difficulty of use and expense in printing, binding, and handling. To present all data in information packages such that all needed materials to perform an actio

17、n is included within the package. The information packages employs a referencing technique intended to ensure that the technician is never dead-ended. To provide a reduced size reproduction of complex system troubleshooting information for use by technicians in limited space or poor environments. To

18、 provide information in such a manner that it can be generated on electronic displays by computer access. 1.1.3 The FOMM is arranged to separate (normally by separate Support Volumes and Troubleshooting/Repair Volumes) the data required to troubleshoot and repair the equipment from that information

19、required to install, operate and 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-2410OC TM m 9999906 047b222 2 m MIL-M-24100C understand the functional operation of the equipment. This approach addresses the Technicians Handbook“ concept whic

20、h 3s intended to provide the qualified technician during troubleshooting and repair in one volume only, that informa- tion he requires to troubleshoot the equipment and isolate a fault to a unit of hardware without being encumbered by baseline data needed for other purposes. Further, all information

21、 required for the maintenance and repair of the equipment is arranged into hardware data packages and indexed sequentially by unit, assembly, and subassembly number. Thus all data required to troubleshoot, maintain, and repair a given unit or assembly is in a single work package that can be used wit

22、hout reference to other parts of the manual. Hardware data packages can be bound separately, when advisable to facilitate use (see 3.1.3). For example, to limit thickness (see 3.6.2.1) or so that the FOMM can be placed at the location of the respective assembly when equipment units are installed in

23、different rooms or compartments. In addition, this specification covers the requirements for an approximate 5 by 10-1/2 inch sized reprinting of the “Troubleshooting/Repair Volume“ so that a technician can carry this smaller volume in his pocket. 1.1.4 Issues. This specification covers the content,

24、format, quality assurance, and preparation requirements for the following issues of a technical (see 6.2): a. b. d. e. f. g. h. C. Preliminary technical manual (PTM) (see 6.5.41) Final manual (see 6.5.15) Technicians pocket manual (see 6.5.55) Supplement manual (see 6.5.51) Permanent change (see 6.5

25、.39) Interim change (see 6.5.24) Complete revision (see 6.5.45.1) Update revision (see 6.5.45.3) 1.1.5 Data items. specification and shall be delivered as specified (see 6.2): The following manual data items are described in this a. Book plan (see 6.5.4). b. Review draft copy (RDC) (see 6.5.44). c.

26、Final reproducible copy (camera-ready) (see 6.5.16). d. Photolithographic negatives (see 3.9.4). e. Replenishment materials (see 6.5.43). f. Certification checkoff list (see 3.10.6). 1.1.6 Classification. specified (see 6.1): FOMM manuals shall be one of the following types as Type I - Equipment man

27、uals (all types). Type IS - Service test equipment manuals (see 6.5.46). Type IX - Experimental equipment manuals (see 6.5.14). Type II - System/subsystem manuals. Type 11s - Service test system manuals. Type IIX - Experimental system manuals. 1.2 Applicability to services. Certain paragraphs in thi

28、s specification are not applicable to all services. When a paragraph applies to fewer than all the using services, the paragraph text is prefixed with the letter (A) Army, (CG) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-c _ _. _ MIL-M-24LOOC T

29、M 97999Ob 047b223 4 MIL-M-24100C U.S. Coast Guard, (F) Air Force, (MC) Marine Corps, and (N) Navy, as applicable. subparagraphs unless otherwise indicated. (F) Throughout the specification the term “manual“ equates to “volume“. The service designation for a numbered paragraph applies to all 1.3 Appl

30、icability to types of manuals, The basic data requirements for each manual type are depicted in figure 1. Also, certain paragraphs in this specification are only applicable to certain manual types. These paragraphs are prefixed by the manual type (for example I, IS, IX) to which they apply. Paragrap

31、hs not so designated apply to all manual types. indicated (see 6.2), the designation for a numbered paragraph shall apply to all of its subparagraphs. Unless otherwise 1.4 Security classification. Marking, handling, and production of classified material shall be in accordance with DOD Instruction 52

32、20.22-M (see 6.4). 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications. standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent Specified herein. Unless otherwise specified, the issues of these documents are those

33、 listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (See 6.2). SPECIFICATIONS MILITARY MIL-M-008910 Manuals, Technical, Illustrated Parts Breakdown, Preparation of. MIL-E-17555 Electronic and Electrical Eq

34、uipment, Accessories, and Provisioned Items (Repair Parts) : Packaging of. MIL-F-17655 Field Changes and Field Change Kits; General Specification for. MIL-D-23140 Drawings, Installation Control, for Shipboard Electronic Equipment. MIL-P-24534 Planned Maintenance System: Development of Maintenance Re

35、quirement Cards, Mainte- nance Index Pages and Associated Documentation. MIL-M-24747 Technical Repair Standards (TRS) Manual; Preparation of MIL-T-31000 Technical Data Packages, General Specification for. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

36、-,-,-MIL-M-24100C TM = 99999Ob O476224 b 9 MIL-M-24100C MIL-M-38784 MIL-P-38790 MIL-M-38807 MIL-M-85337 STANDARDS MILITARY MIL-STD-12 Manuals, Technical: General Style and Format Requirements. Printing Production of Technical Manuals: General Requirements for. Manuals, Technical: Illustrated Parts B

37、reakdown, Preparation of. Manuals, Technical: Quality Assurance Program; Requirements for. Abbreviations for Use on Drawings, and in Specifications, Standards and Technical Documents. MIL-STD-17-1 Mechanical Symbols (Other than Aeronau- tical, Aerospacecraft and Spacecraft Use), Part 1. MIL-STD-17-2

38、 Mechanical Symbols for Aeronautical, Aerospacecraft and Spacecraft Use, Part 2. MIL-STD-335 Manuals, Technical: Repair Parts and Special Tools List. MIL-STD-1364 Standard General Purpose Electronic Test Equipment. MIL-STD-2073-1 DoD Material Procedures for Development and Application of Packaging R

39、equirements FEDERAL INFORMATION PROCESSING STANDARDS FIPS PUB 24 Flowchart Symbols and Their Usage in Information Processing HANDBOOKS MILITARY MIL-HDBK-131 Identification Markings for Fasteners. MIL-HDBK-300 Technical Information File of Ground Support Equipment. (Unless otherwise indicated, copies

40、 of federal and military specifications, standards, and handbooks are available from the Standardization Document Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-6094. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-r -_ MIL-M-2

41、4LOOC TM W 7799706 0476225 8 MIL-M-24100C (Copies of the Federal Information Processing Standards (FIPS) are available to Department of Defense activities from the Standardization Document Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-6094. Others must request copies of FIPS fr

42、om the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161-2171.) 2.1.2 Other Government documents, drawings. and publications. The following other Government documents, drawings, and publications form a part of this specification to the extent specified herein. Unles

43、s otherwise specified, the issues are those cited in the solicitation. DRAWINGS DEPARTMENT OF THE NAVY c NAVAL SEA SYSTEMS COMMAND (NAVSEA) 803-5001049 Piping System Symbols and Abbreviations (Application for copies should be addressed to: Commander, Portsmouth Naval Shipyard, Code 202.2, Portsmouth

44、, NH 03801.) PUBLICATIONS DEPARTMENT OF DEFENSE (DOD) Cataloging Handbook H4/H8 Commercial and Government Entity (CAGE) DOD 5220.22-M Industrial Security Manual for Safeguarding Classified Information (USDP). (Application for copies should be addressed to the Superintendent of Documents, U.S. Govern

45、ment Printing Office, Washington, D.C. 20402-9372.) DEPARTMENT OF THE NAVY NAVAL.AIR SYSTEMS COMMAND (NAVAIR) 16-1- 523 Avionics Preferred Standard Test Equipment. NAVAL SEA SYSTEMS COMMAND (NAVSEA) 0967-LP-000-0120 Electronics Installation Maintenance Book, Circuits. 0969-LP-019-7000 Electrical Tes

46、t Equipment Application Guide, S9AAO-AA-SPN-010/ General Specifications for Ships GEN-SPEC of United States Navy. S9086-0O-STM-O00/ Naval Ship Technical Manual (NSTM). NSTM 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-M-24100C d) -s S9086-CZ

47、-STM-000/ Inspections, Tests, Records, and Reports CH90 STOOO-AA-IDX-lO/ Portable Electrical/Electronic Test Equipment PEETE (PEETE) Index for Support Requirements of Shipboard Electronic, Electrical, IC, Weapons and Reactor Systems. (Application for copies should be addressed to the Standardization

48、 Documents Ordering Desk, Building 4D 700 Robbins Avenue, Philadelphia, PA 19111-5094.) DEPARTMENT OF THE AIR FORCE TO 00-5-1 Air Force Technical Order System. TO 33K-1-01 Calibration Standards and Calibration Equipment, (Application for copies should be addressed to Headquarters, Air Force Logistic

49、 Command DPO, Wright-Patterson Air Force Base, OH 45433.) MARINE CORP TM-6625-15/1 Electronics Test Equipment Listing. (Application for copies should be addressed to Commander, Marine Corps Logistics Bases, Code 876, Albany, GA 31704-5000.) 2.2 Non-Government Dubiications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those