1、mIL-fl-81807A (2) 17 E 777770b 0205177 1 E MIL-M-81807A(AS AMENNENT 2 12 September 1983 SUPERSEDING AMENDMENT 1 15 January 1983 MILITARY SPECIFICATION MARKING OF AIRCRAFT GROUND SUPPORT EQUIPMENT AND OTHER PROCESS FOR FLIGHT LINE VEHICLES WITH RETRO-REFLECTIVE MATERIALS; This amendment forms a part
2、of Military Specification MIL-M-81807A( 1 date( 22 February 1971, and is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 1 t 2.1, under SPECIFICATIONS, FEDERAL, delete “TT-V-109 Var
3、nish, Spar, A 1 kyd-re s i n . II PAGE 2 3.1 General, delete “L-S-300, Type II, Class 3, Reflectivity No. 1, Color g, Hidth 2 inches and substitute “L-S-300, Type II, Class 4, Reflectivity 1, Color White, Width 2 inches.“ 3.2.3 Sealer, delete sentence in its entirety and substitute “Edge sealer, par
4、t number 735, manufactured by Minnesota, Mining and Manufacturing Company (3M, or equivalent, shall be applied to the edges of the tape in the form of a fillet to protect the tape. The sealer shall be allowed to dry for 48 hour s. I The margins of this amendment are marked with an asterisk or vertic
5、al lines to indicate where changes (additions, modifications, corrections, deletions) from the previous amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evalua
6、te the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment. Custodian: Navy - AS Preparing activity: Navy - AS (Project No. 1730-N270) Q USGOVERNMENT PRINTING omcE: 1983-605-034/4646 FSC 1730 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1