NAVY MIL-P-19380 J-1981 PONTOONS STEEL SECTIONAL P-SERIES INCLUDING FITTINGS AND TOOLS (FOR COUPLING INTO FLOATING STRUCTURES) GENERAL SPECIFICATION FOR《P系列分段式钢浮筒：包括配件和工具的一般规格(耦合成浮.pdf

1、MIL-P-19380J 28“-March 1981 SUPERSEDING IN PART 5 April 1972 With Amendment-1 15 November 1972 MIL-P-19380H MILITARY SPECIFICATION PONTOONS, STEEL, SECTIONAL, P-SERIES: INCLUDING FITTINGS AND TOOLS (FOR COUPLING INTO FLOATING STRUCTURES), GENERAL SPECIFICATION FOR This specification is approved for

2、use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification discusses requirements for steel poctoon units, components, and fittings for coupling together to form barges, causeways, and other types of floating structures (see 6.1 of the applicable detail

3、specification). 1.2 Classification. Units, components, and parts shall be of the mark numbers specified (see 6.2 and Table I of the applicable detail specification). 2. APPLICABLE DOCUMENTS 2.1 Issues of documents, The following documents, of the issue in effect on date of invitation for bids or req

4、uest for proposal, form a part of this specification to the extent specified herein. SPECIFICATIONS FEDERAL A-A-880 - Strapping, Steel, and Seals. TT-V-121 - Varnish, Spar, Water-Resisting. TT-W-571 - Wood Preservation: Treating Practices. UU-T-81 - Tags, Shipping and Stock. PPP-B-601 - Boxes, Wood,

5、 Cleated-Plywood. PPP-8-621 - Boxes, Wood, Nailed and Lock-Corner. PPP-B-636 - Boxes, Shipping, Fiberboard. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer (Code 156),.Naval C

6、onstruction Battalion Center, Port Hueneme, CA 93043, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. I_- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL

7、-P-19 380J MILITARY MIL-P-116 - Preservation-Packaging, Metkads of. MIL-B-121 - Barrier Material, Greaseproofed, Wate Flexible. fed, MIL-P-13983 - Paint, Temporary, Lusterless, Gasoline Removable. MIL-F-16723 - Fairleads and Rollers (for Pontoon Assemblies and MIL-C-18295 - Chain and Fittings for Fl

8、eet Moorings. MIL-T-22085 - Tape, Pressure-Sensitive Adhesive, Preservation and MIL-D-23003 - Deck Covering Compound, Nonslip, Lightweight. MIL-P-24441 - Paint, Epoxy Polyamide. MIL-T-27730 - Tape, Antiseize, Polytetrafluoroethylene. Marine Railways). Sealing. DETAIL SPECIFICATIONS MIL-P-19380/1 - P

9、ontoons, Steel, Sectional, P-Series. MIL-P-19380/2 - Joining Fittings, Tools, and Gages. MIL-P-19380/3 - Deck Fittings and Outfitting Accessories. MIL-P-19380/4 - Drydock Equipment and Miscellaneous Fittings and Accessories. STANDARDS FEDERAL FED-STD-H28 - Screw-Thread Standards for Federal Services

10、. MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection. MIL-STO-129 - Marking for Shipment and Storage. DRAWINGS NAVAL FACILITIES ENGINEERING COMMAND (NAVFAC) Drawina No. 142877 146294 146520 146608 494620 813634 813635 813636 813637 813638 813639 Description N.L. Equipment P-Series

11、Pontoons Fuel Storage Barge 1500 BBL Wood Foundation for 500 BBC Tank. Landing Ramp for 30 Ton Tank. Fairlead Roller - Single Line. Pontoon Gear Chocks. Running Lights for Pontoon Barges Assembly and P-1 Assembly and Connection Details P-1 Parts Dtails. P-2 Assembly. P-2 Connection Details. P-2 Part

12、s Details. P-2 Parts Details. Details. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-813641 813642 813643 813644 813645 813650 813651 813654 816433 816444 816452 816455 816456 l64 6 1- 816462 816463 816464 816466 816467 816468 l6408 879112 879113

13、 879116 Sheets 1 through 3 879117 879118 879125 879160 879162 879175 889663 889752 889764 889766 889767 889772 1290786 1332752 1332753 P-3 P-3 P-3 P-4 P-4 P-4 Description Assembly. Connection Details. Parts Details. - Assembly. Connection Details. Parts Details. Welding Jig-J1 for Assembly Details.

14、R-1A Ramp for P-4 Pontoon Details. Pontoon Gear Miscellaneous Fittings Details. Pontoon Drydock Manifolds, MDL and DMS Details. Pontoon Assembly Angles (Modified Design) Details. Winch Support, Mark WT5. Fairleads Anchor Davit Details. Hole Spacing Gages for Assembly Angles and Hatch Cover and Floor

15、 Panel Assembly Erection Anchor Hoist Pontoon Barge Arrangement and Pontoon Drydocks Blocking Frame (Adjustable) Parts Pontoon Drydocks Blocking Frame (Adjustable) Erection Details for Miscellaneous Fittings on Pontoon Drydocks Miscellaneous Fittings Parts Pontoon Drydocks Miscellaneous Fittings Par

16、ts P5F, PSM Pontoon Mating Assembly. Pontoon P5F, P5M Assembly. Pontoon P5F, P5M Parts Details. Pontoons, Arrangement and Details. Details. Details. Detail. Erection Details. Pontoon Drydocks. Detail. Detail. Pontoon Gear Miscellaneous Fittings. Heavy Duty Hinge H17AF and H17AM. Pontoon Gear Miscell

17、aneous Fittings. Propelling Unit Foundation Model OA31 Engine Bed Assembly and Details. Anchor Housing Assembly. Warping Tug A-Frame Assembly and Details. Barge, Net Tending. Lighterage and Barge Gear Miscellaneous Fittings. Pontoon Assembly Gear. Pontoon Gear Miscellaneous Fittings. Landing Ramp fo

18、r 30 Ton Tank. Landing Hamp for 30 Ton Tank. Pontoon Gear Deck Fittings. Lashing-Causeway/Barge Hinged Padeye PH6 LST Side Flexor Coupling Parameters. Flexor System. Carry Parts Detail. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-19380J Dra

19、wing pins, and any other small items of a similar nature, which require a container for safe and convenient handling and stowing, shall be packed in close-fitting boxes conforming to PPP-B-621, class 2; or PPP-B-601, overseas type. Contents shall be blocked and braced to prevent movement within the

20、boxes. of the same description shall be packed in the same box. Only items 5.2.1.2 Bundled item?. Knocked-down pontoons, launching angles, assembly angles, deck closure assemblies, fenders, and any other large items or assemblies of a similar nature shall be bundled in secure lifts of a weight and s

21、ize convenient for handling and stowing. a bundle exceed approximately 4,000 lb. secured with steel strapping or bolts with suitable 2-inch by 4-inch wood blocking and battens, as required to form compact, nonshifting bundles. Strapping shall be 0.035-inch by 1-1/4 inch flat steel conforming to A-A-

22、880. Metal edge protectors shall be used where strapping bears on sharp metal edges. hand ling. In no case shall the weight of Items shall be nested, arranged, and Skids shall be provided on the bottom of the bundle to allow fork lift 5.2.1.3 Loose.item8. Assembled pontoons and ramps shall be shippe

23、d loose as individual items. 5.2.2 Level B. Pontoons, fittlngs, accessories, tools, and gages shall be packed as specified for level A, except that boxes shall conform to PPP-B-621, class 1; or PPP-B-601, domestic type; and strapping for bundled items shall be either class A or B. 5.2.3 Commercial.

24、Pontoons, fittings, accessories, tools, and gages shall be prepared for shipment in a manner which will insure arrival at destination in satisfactory condition. applicable carrier rules and regulations. Assembled pontoons and ramps shall be shipped as Zoose items. Containers and packing shall comply

25、 with 5.3 Marking. Shipping containers, bundles, and loose items shall be marked in accordance with MIL-STD-129. 6. NOTES 6.1 Intended use. (See 6.1 of applicable detail specification.) 6.2 Orderin data. (See 6.2 of applicable detailspecification.) 6.3 Contract data requirements. When this specifica

26、tion is used in an acquisition which incorporates a DD Form 1423 and invokes the provisions of paragraph 7-104.9(n) of the Defense Acquisition Regulations (DAR), the data requirements will be developed as specified by an approved Data Item Description (OD Form 1664) and delivered in accordance with

27、the Contract Data Requirements List (DD Form 1423) incorporated into the contract. When the provisions of DAR 7-104.9(n) are not invoked, the data shall be delivered in accordance with the contract requirements. - 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

28、e from IHS-,-,-MIL-P-19380J 6.4 First article. When a first article is required, it shall be tested The first article should be a first production item consisting of one and approved understhe appropriate provisions of paragraph 7-104.55 of the DAR. complete contract item. instructions in all acquis

29、ition instruments regarding arrangement for examinations, tests, and approval of the first article. The contracting officer should include specific 6.5 Clarification of documents. ANSI A190.1 was originally published by the Department of Commerce as Voluntary Product Standard PS 56 and has been acce

30、pted by ANSI. 6.6 Detail specifications. The following detail specifications are applicable to this specification and, in combination with this specification, comprise the total revision of MIL-P-19380H. MIL-P-19380/1 - Pontoons, Steel, Sectional, P-Series. MIL-P-19380/2 - Joining Tools, Fittings, a

31、nd Gages. MIL-P-19380/3 - Deck Fittings and Outfitting Accessories. MIL-P-19380/4 - Drydock Equipment, Miscellaneous Fittings and Accessories. Custodians : Preparing activity: Army - ME Navy - YD Navy - YD Project No. 1945-0018 f7 US. GOVERNMENT PRINTING OFFICE: 108(-703-023/2272 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-