NAVY MIL-P-81655 (1)-2001 PITOT STATIC TUBE L-SHAPED COMPENSATED ELECTRICALLY HEATED GENERAL SPECIFICATION FOR《L型一般规格电热补偿皮托静态管》.pdf

1、MIL-P-81655(AS)AMENDMENT 116 April 2001MILITARY SPECIFICATIONPITOT STATIC TUBE, L-SHAPED, COMPENSATED,ELECTRICALLY HEATED, GENERAL SPECIFICATION FORThis amendment forms a part of MIL-P-81655(AS), dated 03 December 1970, and isapproved for use by the Naval Air Systems Command, Department of the Navy.

2、 It is available foruse by all Departments and Agencies of the Department of Defense.PAGE 33.2: Delete and substitute:“3.2 First article . When specified (see 6.2), a sample shall be subjected to first articleinspection in accordance with 4.2.1.”PAGE 104.2a: Delete and substitute:“a. First article i

3、nspection : First article inspection consists of examinations and testsperformed on sample tubes submitted for approval.”4.2.1: Delete and substitute:“4.2.1 First article inspection . The first article inspection of the pitot static tube shall consistof all the examinations and tests of this specifi

4、cation performed in the order specified underparagraphs 4.5, 4.6, and 4.7 except for 4.7.1. It shall include the reliability test of 4.4.3.1.”4.2.1.1: Delete and substitute:AMSC N/A 1 of 2 FSC 6610DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited .INACTIVE FOR NEW DES

5、IGN AFTER 09 OCTOBER 1996INCH-POUNDProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-81655(AS)AMENDMENT 12“4.2.1.1 First article inspection sample . First article inspection samples shall consist of threetubes manufactured in accordance with this

6、 specification. The tubes submitted for first articleinspection shall have been previously subjected only to the inspections of 4.5. Samples and datashall be forwarded at the suppliers expense to the laboratory designated in the Letter ofAuthorization.”PAGE 114.2.1.1.1: Delete and substitute:“4.2.1.

7、1.1 First article inspection sample identification . The first article inspection samplesshall be identified by durable tags, securely attached, and marked with the following information:Sample for First Article InspectionPitot Static Tube Type Submitted by (Manufacturers name, date)for First Articl

8、e Inspection in accordancewith MIL-P-81655 under authorization(reference letter authorizing tests) .”PAGE 134.4.3, second line: Delete “Qualification” and substitute “First Article.”4.4.3.1, title: Delete “Qualification” and sub stitute “First Article.”PAGE 196.2d: Delete “Qualification” and substitute “First Article.”6.2: Add as 6.2g:“g. When first article is required (see 3.2).”6.3: Delete.Preparing activity:Navy - AS(Project 6610-0608)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-