NAVY MIL-S-24154 A (2)-1991 SYNTACTIC BUOYANCY MATERIAL FOR HIGH HYDROSTATIC PRESSURES《高静水压力合成的材料》.pdf

1、- , MIL-S-24154A (2) 93 m 9999906 04b9673 O m 1 INCH-POUND 1 MIL-S-24154A(SHIPS) AMENDMENT 2 6 February 1991 MILITARY SPECIFICATION SYNTACTIC BUOYANCY MATERIAL FOR HIGH HYDROSTATIC PRESSURES This amendment forms a part of MIL-S-24154A(SHIPS), dated 10 March 1967 and is approved for use by the Naval

2、Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense. PAGE 2 * 3.1, Delete and substitute: “3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see 6.6) in accordance with 4

3、.3.“ * 3.1.1 : Delete “qualification“ and substitute If irst article. II PAGE 3 * TABLE I, title: Delete “qualification“ and substitute “first article. It PAGE 4 * TABLE II, Under title: Delete “qualification“ and substitute “first article. TABLE II, Columns 3 and 5, water absorption (max. ) (percen

4、t by weight): Under both type I and type II, delete “3“ and substitute II 2 II AMSC N/A 1 of 3 FSC 9330 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling Services- MIL-S-24154A (2) 93 9999906 04b9b74 2 MIL-S-24154A(SHIPS) AMENDMENT 2 P

5、AGE 5 * 4.2: Delete the word “qualification“ and substitute “first article“. * 4.2: Delete “Footnote L/“ PAGE 6 * 4.2.1, Line 1: Delete the word “qualification“ and substitute “first article“. * 4.3, Line 1: Delete the word “qualification“ and substitute “first article“. * 4.4.1, Line 1: Delete the

6、word “qualification“ and substitute “first article“. PAGE 11 * 6.2( F) : Delete the word “qualification“ and substitute “first article“. PAGE 12 * 6.6, Delete and substitute: “6.6 First article. When first article inspection is required, the contracting officer should provide specific guidance to of

7、ferors whether the item(s) should be a preproduction sample, a first article sample, a first production item, a sample selected from the first production items, a standard production item from the contractors current inventory (see 3.1) , and the number of items to be tested as specified in 4.6. The

8、 contracting officer should also include specific instructions in acquisition documents regarding arrangements for examinations, approval of first article test results, and disposition of first articles. Invitations for bids should provide that the Government reserves the right to waive the requirem

9、ent for samples for first article inspection to those bidders offering a product which has been previously acquired or tested by the Government, and that bidders offering such products, who wish to rely on such production or test, must furnish evidence with the bid that prior Government approval is

10、presently appropriate for the pending contract. Bidders should not submit alternate bids unless specifically requested to do so in the solicitation. * 6.7, Delete. 2 Licensed by Information Handling ServicesMIL-S-24154A (2) 93 m 9979906 0469675 4 m MIL-S-24154A(SHIPS) AMENDMENT 2 * 6.8 The changes o

11、f this amendment are marked with an asterisk or vertical lines to indicate where changes (additions, modifications, corrections, deletions) from the previous amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these nota

12、tions. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment. Preparing activity: (Project 9330-N037) Navy - SH 3 Licensed by Information Handling Services