NAVY MIL-S-40035 C-1970 SHIRT WOMAN-S (EXERCISE)《女士衬衣》.pdf

1、MIL-S-40035C 84 m 7777706 0370922 7 m . - .I MIL-S-4003SC 24 April 1970 SUPERSEDING MIL-S-400353 12 November 1965 i MILITAY SPECIFICATION E SHIRT, WOfiIANS (EXERCISE) , This specification is mandatory for use by all Bepartments and Agencies of She Department of Defence. 1. SCOPE * -1.1 -Scope.- This

2、 specification covers a short sleeve, cotton chambray exercise shirt or use by womenLn the Army and Navy. * i2 Classification.- The shirt shall be of one type in sizes as specified (see 6.2). Schedule of Sizes 8 - 10 -22 - 14- 16 - l - ZO(38) -22(40) - 24(42) - 26(44) 2. APPLICABLE DOCIDENTS * 2.1 T

3、he following -documents of the issuedn effect on date of invitation for bids or request for proposal form a part of this specification to the extent specified herein: SPECIFICAT-IONS FEDERAL V-43-871 V-T-27G - Thread, Cotton. - Button, Sewing-Hole, -.and_Button, Staple, (Plastic) - Label; For Clothi

4、ng, Equipage and Tentage - -3iberboard; Corrugated =and Solid, Sheet -Stock CCC-C-231 - Xioth, Chambray, Cotton, DDD-L-20 PPP-F-320 (General Use). (Container Grade),_and Cut Shapes. FSC 8415 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-400

5、35C 4 W 9999906 0390q23 9 - MILITARY MIL-B-17757 - Boxes, Eiberboard, Corrugated (bloduiar Sizes) , STANDARDS FEDERAL FED-STD-751 - Stitches, Seams, and Stitchings, MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes. NIL-STD-129 - Marking for Shipment and Storage. (Co

6、pies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer. ) * 2.2 Other publications.- The following documents form a part of this spec

7、ification to the extent specified herein. the issues in effect on date of invitation for bids or request for proposal shall apply: Unless otherwise indicated, NATIOXAL MOTOR FREIGHT TRAFFIC ASSOCIATION, IN. National Motor Freight Classification (Application for copies should be addressed to the Amer

8、ican Trucking Associ- ations, ATTZJ: Tariff Order Section, 1616 P Street, N.W., Washington, D.C. 20036. ) UNIFORH CLASS IFi CATION COMMITTEE Uniform Freight Classification (Application for copies should be addressed to the Unifonn Classification Committee, Room 202 Union Station, 516 W. JacksonBlvd.

9、, Chicago, Illinois 60606 .) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-40035C B4 m 777770b 0370424 o m- - MIL-s-40035c 3. REQUIFSXENTS 3.1 Guide sample.- Sample, when furnished, is solely for guidance and Variation from this specificati

10、on information to the supplier (see 6.3). may appear in the sample, in which case this specification shall govern. commenced, one or more finished shirts shall be submitted or made ready for the contracting officer or his authorized representative for inspection as specified in 4.2. The approval of

11、the preproduction sample authorizes the commencement of production but does not relieve the supplier of responsibility for compliance with all applicable provisions of this specification. preproduction sample shall be manufactured by the supplier in the same facilities to be used for the manufacture

12、 of the production items, * 3.2 First article.- When specified (see 6.2), before production is The 3.3 Materials .- 3.3.1 Basic material.- The basic material for the shirts shall be cotton, chambray cloth, USAF Blue 1515, conforming to type I, style A (3.0 oz,) of ccc-c-231. * 3.3,2 Buttons.- Front

13、closure buttons shall be White BA, Cable No. 62031, type II, class K, style 25, Jl-line, conforming to V-B-871. 3.3,3 Labels.- Each shirt shall have an identification label arLd a size label, conforming to type I, class 1 a.:d 2 respectively, of DDD-L-20, fastness requirements to laundering shall ap

14、ply. The * 3.3,4 Thread,- The thread shall be cotton, White Ali, C.A. 66050 conforming to type IA2, tickets No. 60, 3 ply and 70, 2 ply of V-T-276. * 3.4 Design.- The shirt has a plain front with cut-on facings, five button front closure, open-neck collar with pointed ends, short sleeves and one pat

15、ch pocket on left front (see figure 1). * 3.4.1 Figure.- Figure 1 is furnished for information only. To the extent of any inconsistencies between the written specification and the figure, the written specification shall govern, * 3.5 Patterns.- Standard patterns which provide an allowance of 1/4 inc

16、h for collar ends and turnunder of-hems; 3/8 inch for neck and collar joining 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ - - MIL-S-40035C 4 7777706 0370q25 2 - MIL-s-40035c seams; and 1/2 inch for all other seams, will be furnished by the Go

17、vernment. . The standard patterns shall not be altered in any way, and are to be used as a guide for cutting suppliers working patterns. The working patterns shall be identical to the standard patterns. In the safety-stitch construction (operations 8, 11 and la), the 1/2 inch seam allowance shall be

18、 used even though the finished seam allowance may measure from 3/8 to 7/i6 inch. 3.5,1 List of pattern part2.- The components of the shirt shall be cut from material as specified below and in accordance with the pattern parts: Material Pattern Nomenclature Cut Parts -Cotton chambray cloth Front .Bac

19、k Sleeve Collar Pocket 3.6 Construction.- * 3.6.1 Stitches, seams and stitching.- Stitch, seam, and stitching types specified In table I shall-conform to TED-STD-751. any -ane of them may be used. is, the .under-thread, shall be on-the Inside of the shirt. Seams shall be properly sewn to eliminate r

20、aw edges, runoffs, twists, pleats, puckers or open seams. shall be 3/16 to 1/4 inch. Whenever two or more _ -methods of seam or stitch types are given for-the same part of the operation, When stitch type 401 pis -used, the looper, Sthat On safety-stitch construction, the width of the overedge stitch

21、 * 3.6.2 Stitches per .inch.- The minimum and maximum number of stitches per inch shall be as specified in table I. 3.6.3 -Thread breaks and ends of seams.- -Ends of all seams and stitchings, when aot ,caught in ather seams or stitching, shall be backtacked-not less than 1/4 inch. secured by stitchi

22、ng back of the break not less than 1/2 inch. The ends of a continuous line of stitching shall overlap 1/2Anch except that on labels .the overlap shall be not less than three stitches. thread breaks (401 stitch type) may be repaired using 301 stitch .type. Thread breaks orskipped stitches (allotitch

23、types) shall be Skipped stitches or 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-S-4003SC 4 7777706 0370426 4 MIL-S-40035C * 3.6.4 Buttonholes.- The buttonholes shall be straight cut-after type, barred at each end, and shall be 9/16 to 11

24、/16 inch finished cut length. buttorthoes shall be clean cut and correctly positioned with the stitching caught in the fabric. be on the outsie of the shirt. The When a purl-type stitch is used, the purling shall * 3.7 Manufacturing operation requirements.- The shirt shall be manufactured in accorda

25、nce with operation requirements specified in table I. The supplier is not required to follow the exact sequence of operations. stitches may be used to facilitate manufacturing provided they are reaoved or do not show on the finished garment. Basting or holding * 3.7.1 Marking.- The component parts o

26、f the shirt shall be marked to insure a uniform shade and size throughout the garment. marking may be used except: Any method of (a) Corrosive metal fastening devices. (b) Sew-on type tickets. (c) Adhesive type .tickets which feave traces of paper or adhesive on thematerial upon-removal of the ticke

27、ts. 5 ;j) . . . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3EL-S-40035C MIL-S-40035C 84 m 77797Ob 0390427 b m ON er( mu) LI -21 I fn 4J k a -4 01 a o J5 “a a I U k -rl -G U 3 u -+J 8 Ei 01 U rl m 6 Provided by IHSNot for ResaleNo reproduction or

28、 networking permitted without license from IHS-,-,-m i O UY m I O o m I O a mNmm 1111 .o000 u)bDo CD 4 I N r( o d I rJ rl nnn a CdP NP4Ndrl IIICt al al a aw rnmm cn . cnrnm o 4 I pl a 1 cn a cn O O 4 I wu- e W a Fir: oa 4 O m cl O Ir) r(l-lrl O00 MUm l-l O r) alc r(d 2% O uw -0 al eu oa -9 w alw iil

29、 I3 O z U . in W ! -. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-40035C 84 W 9777706 0370427 T W ;.TL-S40035C D 4 I N ri d O VI 4 o m . al to fold. 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license f

30、rom IHS-,-,-MIL-S-40035C 4 7777406 0370435 5 W MEL-S-40035C 3.9 I?orhanship.- The finished shirt shall Iconform to Ehe-quality and grade of product.estab1ished by this specification. defects shall not exceed the applicable acceptable quality levels. The accurrence of 4, QUALITY ASSWCE PROVISIONS * 4

31、.1 Responsibility for inspection,- Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection -requirements -as -specified herein. J3xcept as otherwise speci- fied in the contract or order, the supplier may use his own or any other

32、 facilities suitable for the performance of the inspection requirements speci- fied herein, unless disapproved by the Government. The Government reserves the right -to perform any of thelinspections set forth in the specification where such inspections are deenednecessary to asciire supplies and ser

33、vices . . zonform to prescribed requirements. * 4.2 First article inspection.- Vhen required, the preproduction sample - submitted in accordance with3.2, shall be inspected as specified in 4.3,2.1 through 4.3.2.3 for compliance with design, construction, worlananship and dimensional requirements. *

34、4.3 Inspection.- Sampling for =inspection shall be performed in accordance wth MIL-STD-105 except where-otherwise indicated hereinafter. 4-3.1 Component and material inspeclion.- dn-accordance with 4,L above, - -components and materials shall be tested inaccordance with all the -requirements of refe

35、renced specifications, drawings and standards unless otherwise excluded, amended, modified or qualified in this Specification or applicable purchase documents. 4.3.2 Examination of the end item.- The classification of defects found during the-examination shall hein accordance with CF, class weather-

36、resistant, variety DW, grade V15c of MIL-B-17757. Level A packages shall be packed flat with every five reversed, 25 in depth within a shipping container.-Toward the end of the contract or order, or when there are less than the required amount of the same size per rcontainer, mixed sizes may be pack

37、ed within the same shipping -container. The fiberboard for the box liner shall conform to type . * 5.2.2 Level B.- aenty-five shirts -of one size only, -packaged as specified in 5.1, shall be packed ina fiberboard shipping container, assembled and closed conforming to class domestic, grade 200, si2e

38、J.A of MIL-B-17757. The fiberboard for the box liner shall conform to type CF, variety Dw, class domestic, grade 200 of MIL-B-17757. with every five reversed, 25 in depth within a shipping container. end of the contract or-oxder, or when there are less than the required amount of &he same size per m

39、ntainer, mixed sizes may he packed within the same ship- ping container. Level A packages shall be packed flat Toward the f 5.2.2.1 When specified (see 6,2),-the shipping-container shall be grade V3c or V3s fiberboard-box fabricated-in accordance with MIL-B-17757 and closed in accordance with the ap

40、penaix of the box specification. The shippingsontainer material may also be grade-V4s of FPP-F-320. * 5.2.3 Level C.- Shirts, packaged as specified in 5.1, shall be packed in a manner to insure carrier acceptance and safe delivery at destination at the lowest transportation Tate for such supplies. C

41、ontainers shall be in accord- ance with Uniform Freight Classification Rules or National Motor Freight ,Classification Rules as applicable. 25 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5-3 Marking.- In addition to any s$ecial.marking required b

42、y the contract ar order, shipping containers shall be marked in accordance with Mil-STD-129. 5.3.1 Labels, mixed sizes.- Each shipping container, packed with mixed sizes, shall have securely attached to the end and side, directly under the printing or stenciling, a white paper-iabel 5 by 4 inches wi

43、th the words “MIXED SIZES“ plainly stamped or printed thereon and under these words shall be legiblystamped or printed the correct quantity and sizes contained therein. 76. NOTES * 6.1 Intended use.- The shirt covered by this specification is intended for wear with the exercise shorts, exercise skir

44、t, or slacks, by female personnel of the Department of Defense. 6.2 Ordering .data.- Procurement -documents should specify -the following : a) ,Title, number -and date of-this specification. (b) Size(s) required (see 1.2) . (c) First article.- Whether preproduction sample.is required (d) Selection o

45、f the-applicable-levels of packaging and packing (e) -When weather-resistant grade fiberboard -shipping containers are (see 3.2), (see 5.1 and 5.2). -required for level B -packing (see 5-2 . 2. i) o 6.3 Samples.- For access to sample of the end item and shade sample, address theprocuring office issu

46、ing the invitation for bids. 6.4 The-margins of this specificationare marked withan asterisk to indicate where changes (additions, modifications, corrections, deletions) -from the previous issue weremade. This was done as R convenience only and the Government assumes ao liability whatsoever for any

47、Anaccuracies in those aotations, Bidders and suppliers are cautioned to evaluate the requirements of this document based on the entire content as writtenlirrespective of the mrginal notations and relationship to the previous Issue. Custodians: Amy - GL Navy - SA Review activities : Amy - MD Navy - SA, MC . Preparing activity : -Amy - GL 9x0 j ect No. 8415-0443 26 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-27 f 1 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-