NAVY MIL-STD-1322-811-1981 UNIT LOAD FOR DOMESTIC& OVERSEAS SHIPMENT BOMB PRACTICE MK 106 MOD 5《MK106MOD5练习导弹国内及海外装船单位运载》.pdf

1、. *.* . 1 I tr. ._ -*,*. , . 9 3307 MIL-STD-1322 -11 3 H 7779713 0071331 7 H +.=. _ I MILITARY STANDARD MIL-STD-1322-811 25 JUNE 1981 UNIT LOAR FOR DOMESTIC AND OVERSEAS SHIPMENT SUPERSEDES WR-53/811 15 JUNE 1981 BOMB, PRACTICE MK 106 MOI) 5 UNIT LOAR RATA DODIC/NALC E961 NUMBER OF BOMBS PER CONTAIN

2、ER 8 NUMBER OF CONTAINERS PER UNIT LOAD . 12 NUMBER OF BOMBS PER UNIT LOAD . 96 GROSS WEIGHT OF ONE CONTAINER (APPRQX.) . 42.5 LBS GROSS WEIGHT OF UNIT LOAD (APPROX.) 605 LBS CUBE . 4.3 CUFT DO NOT STACK MORE THAN 6 UNIT LOADS HIGH IN STORAGE WEIGHT OF PALLET a:. . 90 LBS NOTES: I. UNLESS OTHERWISE

3、SPECIFIED DIMENSIONS ARE IN INCHES. 2. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADJNG, CONTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX TO STANDARDS, MlL-HDBK-ZX(NAVy). LUAR 1s AUTHORIZER REQUIREMENTS FOR CONSTRUCTION OE THIS UNIT LOAD SHALL CONSISI AED FQR DEPOT HANDLNG AND I I .

4、- - . ANPMLE QF THIS DQCUMENT AND IHE LA- STORAGE AND FOh mirmeNi UT CUMMUN CARRIER. J .- .lSSUE-QF HILL-STD-l322. - 4L d24 DATE DATE NAVAL WEAPONS HANDLING CENTER . . PAGE 1 OF 2 ASi*. 4 , Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-STD-L

5、322 -31 3 I 7797733 0073332 O I MIL-STD-132 2 - 811 PALLETIZING PROCEDURE (a) POSITION STRAPPING, ITEM 2 ON THE PALLET DECK, ITEM 1,6 INCHES FROM THE CENTER AND PARALLEL TO THE SIDES. 6) POSITION THE CONTAINERS ON THE PALLET WITH EQUAL OVERHANG ON BOTH SIDES AND ENDS. (c) POSITION STRAPPING, ITEM 2,

6、 OVER EDGE PROTECTORS, ITEM 5, AS SHOWN, AND AROUND THE UNIT LOAD. TENSION UNTIL A DEPRESSION OF ABOUT 1/8 INCH IS MADE IN THE FIBERBOARD EDGE PROTECTOR AND DOUBLE NOTCH SEAL, ITEM 4. (d) POSITION STRAPPING, ITEM 3, UNDER THE PALLET DECK, AROUND EDGE PROTECTORS AND UNIT LOAD, TENSION UNTIL A DEPRESS

7、ION OF ABOUT 1/ INCH IS MADE IN THE FIBERBOARD EDGE PROTECTORS, DOUBLE NOTCH SEAL. MARKING I IN ADDITION TO ANY SPECIAL MARKING RFQUIRED BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322. NOTES i 1. WHEN MIL-P-15011 PALLET IS NOT AVAILABLE, WOOD PALLET NN-P-71, TYPE

8、Y, SIZE 2, GROUP X, IUORIPMAY BE USED. 2. COLD ROLLED, HEAT TREATED .O31 STRAPPING MAY BE USED. 3. UNLESS OTHERWISE SPECIFIED ALL MATERIAL SHALL BE IN ACCORDANCE WITH MIL-STD-1322. 4. ASTM STD D-3950-80, TYPEX5/8 X ,030 POLYESTER STRAPPING AND APPROPRIATE SEALS MAY BE SUBSTITUTED. THREE (3) LATERAL

9、STRAPS AND FOUR (4) LONGITUDINAL STRAPS SHALL BE USED. INSTALL THE ADDITIONAL TWO (2) LONGITUDINAL STRAPS PARALLEL TO ITEM 2 AND 5 INCHES FROM UNIT LOAD EDGE. LONGITUDINAL STRAPPING IS PREPOSITIONED ON TOP OF PALLET DECK PRIOR TO POSITIONING CONTAINERS AND PASSE,S UNDER BOTTOM CONTAINERS AND OVER TO

10、P CONTAINEkS. DPALLETIZING PROCEDURE (a) CUT AND REMOVE STRAPPING. b) REMOVE EDGE PROTECTORS. (e) REMOVE CONTAINERS. 5 4 SEAL SEE NOTE 3 3/4 3 3 STRAPPING, STEEL 3/4 X 1)s x 10 FT 6 84 OTES 8, 2 $:-781 1 1 PALLET, WOOD CL. 1. SEE NOTE 1 2 STRAPPING, STEEL 3/4 X .O35 X 15 FT MIL-P-15011, STY.1 x&x51/

11、2 REQD ITEM DESCRIPTION MATL/DWG DIMENSIONS LIST OF MATERIALS I REVIEW ACTIVITY: PREPAR!NG ACTIVITY: NAVY- OS NAW-oSf AS f7U.s. GOVERNMENT PRINTING OFFICE: 1981-703-023/5360 (PROJECT NO. 8140-N506) PAGE 2 - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-