NAVY MIL-STD-1322-91-1988 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT DOLLY MISSILE TRANSFER MK 30 MOD 0 ON SKID TRANSPORT DL6212586《MK 30 MOD 0型导弹传递托盘 用于国内和海外输送的集装物资 置于DL6212586号.pdf

1、MIL-STD-2322 -92 81 9979922 007123q 7 s - 3747 a o FOR DOLL -” MILITARY STANDARD MIL- STD-1322- 91 UNIT LOAD CNAWI 11 INIuMY 1988 DOMESTIC AND OVERSEAS SHIPMENT . f, MISSILE TRANSFER. MK 30 MOD O ON SKID. TRANSPORT. DL6212586 UNIT LOAD DATA WEIGHT OF TIYO SKIDS 160 LES WEIGHT OF DOLLY - 2100 LES WEI

2、GHT OF STEEL STRAPPING . 4 LBS GROSS WEIGHT OF UNIT LOAD. 2264 LES A CUBE 384.6 CU FT UNIT LOAD DIMENSIONS - 229L X 47W X 61 3/4H A DO ROT USE FOR SHIPPING WEIGHT - AMSC NO. - N/A DISTRIBUTION STATEMENT A NOTES: I. 2. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADING, CONTAINERLOADING AND . APPROVED FO

3、R PUBLIC RELEASE: DISTRIBUTION IS UNLIMITED. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. CARLOADING hflLITARY STANDARDS. REFER TO INDEX TO STANDARDS, MIL-HDBK-236 INAVYI. I FSC 814C MIS UNIT LOAR IS AUTHORIZED AND RELEASED FOR OEPOT HANDLING AND REQUIREMENTS FOR CONSTRUCTION OF. THIS UNIT L

4、OAD- SHALL CONSIST OF MIS DOCUMENT AND THE LATEST ISSUE OF MIL-STD-1322 CNAWI. STORAGE AND IS YANDATORY FOR ALL OFF STATION SHIPMENTS. WPNSTA EARLE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1322-91 (NAVY1 UNITIZING PROCEDURE IA) 181 ICI

5、 (6) El IF) POSITION AND LOCK THE DOLLY WHEELS INWARD AS SHOWN. IG) Ili) TAPE THE SLING LIFTING EYE TO THE ANTI-CHAFING BOARD, ITEM 6, WITH TAPE, ITEM 8, AND TAPE TO THE DOLLY BETWEgN THE FORK POCKETS WITH TAPE, ITEM 8, AS SHOWN. WRAP THE SLING CABLES WITH TAPE, ITEM 9, WHEREVER THEY CONTACT PAINTED

6、 SURFACES OF THE DOLLY. POSITION THE FORWARD GATES ANO GUARD AS SHOWN AND SECURE THE GATE LOCKS. POSITION STRAPPING, ITEM 3, AROUND THE VERTICAL MEMBERS OF THE FORWARD GATES AND CENTER THE PROTECTOR BOARD, ITEM 7, UNDER THE STRAPING. TENSION AND DOUBLE NOTCH THE SEAL, ITEM 4. SECURE STRAPPING TO THE

7、 PROTECTOR BOARD WITH STAPLES, ITEM 5. POSITION THE DOLLY ON THE THE TWO SKIDS, ITEM I, AS SHOWN. THREAD STRAPPING, ITEM 2, UNDER THE SKID STRINGERS ANO OVER THE DOLLY CROSS FRAME. TENSION AND DOUBLE NOTCH THE SEAL, ITEM 4. NOTE: THE STRAPS PASS UNDER THE SLING LEG SWIVELS WHICH UUST BE TILTED UP SL

8、IGHTLY TO PERMIT THE STRAPS TO PASS UNDER THE SHACKLE BOLTS. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322 (NAVY). MARKING: DEUNITIZING PROCEDURE (AI CUT AN6 REMOVE STRAPPING, ITEM 2. NOTE: THE STRAPS MUST BE CUT ON BO

9、TH SIDES OF THE SEAL. (BI LIFT THE DOLLY OFF THE SKIOC. IC) PLACE ANTI-CHAFING BOARD, ITEM 6, ON ONE OF THE SKIDS AND TAPE IN PLACE WITH ITEM 8. CUT AND REMOVE STRAPPING, ITEM 3. REMOVE THE PROTECTOR BOARD, ITEM 7. PLACE SKIDS IN STORAGE FOR FUTURE USE. ID1 E) if) .CLlVG LEG SWIVEL) NOTES: I. ALL MA

10、TERIALS SHALL BE IN ACCORDANCE WITH THE BASIC 2. DO NOT USE TYPE I STRAPPING WITH POWER MACHINES. DOCUMENT, MIL-STD-1322 (NAVYI. I LIST OF MATERIALS REVIEW ACTIVITY: NAVY -OC PAGE 2 . . PREPARING ACTIVITY: NAVY-OC (PROJECT NO. 8140-N7371 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-