NAVY MIL-STD-1323-345-1988 UNIT LOAD FOR UNDERWAY REPLENISHMENT BATTERY LITHIUM SULFUR DIOXIDE AN SLQ-44 AN SLQ-45 BA 5391 SLQ OR BATTERY LITHIUM THIONYLCHLORIDE BA 6511 SLQ FOR OFPTER.pdf

1、MIL-STD-1323 -345 1 W 7777711 0071b4L 2 W Ab/47 MILITARY STANDARD MIL-STD-1323-345 UNIT LOAD FOR UNDERWAY REPLENISHMENT BATTERY, LIT.“JM SULFUR DIOXIDE, AN/SLQ-44, AWSLQ-45, BA 5391/SLQ OR BATTERY, LITHIUM THIONYL CHLORIDE, BA 6511/SLQ OFFBOARD DECEPTION DEVICES (ODDS) FOR UNIT LOAD DATA WDICINALC N

2、UHBER OF BATTERIES PER CONTAINER NUBER OF COHTAINERS PER UNIT LOAD NUMBER OF BATTERIES PER UNIT LOAD GROSS EIGHT OF ONE CONTAINER (APPROXI WEIGHT OF ADAPTERS (APPROX) MIGHT OF PALLET (APPROX) GROSS WEIGHT OF UNIT LOAD (APPROXI DIMENSION A (UNIT LOAD HEIGHT) DIMENSION X (CONTAINER HEIGHT) CUBE M) NOT

3、 STACK M3RE THAN 5 UNIT LOADS HIGH IN STORAGE AMSC NO, - N/A - APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED IN PALLET ADAPTER, ADU-615/U ANILQ-44 ANISLQ-45 EA 5391fSLQ EA 6511ISLQ 10 10 5 1 4 4 4 4 40 40 20 4 98 LBS 164 LES 93 LBS 266 LES 126 LES 126 LES 126 LES 126 LBS W LES % LES 94 LES

4、94 LBS 612 LES 876 LES 592 LES 1284 LES 34 IN 34 IN 34 IN 37.5 IN 29 IN 29 IN 29 IN 32.5 IN 39 CU FT 39 CU FT 39 CUT FT 43 CUT FT *- NOTES: i. UNLESS OTHERWISE SPECIFIED. DIMENSIONS ARE IN INCHES. 2. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADING. CONTAINERLOADING AND CARLOADING MILITARY STANDARDS.

5、REFER TO INDEX TO STANOARDS MIL-HDEK-23G (NAVY). THIS UNIT LOAD IS AUTHORIZED AND RELEASED FOR SHIPPING, HANDLING, STORAGE AND TRANSFER-AT-SEA, IT MAY ALSO BE USED FOR DOMESTIC SHIPMENT IN COMPLIANCE WITH DOT REGULATIONS. I-/ -82 DATE SGNATUR SEASYSCai, 8Y DIRECTION DATE I FSC 8140 REQUIREMENTS FOR

6、CONSTRUCTION OF THIS UNIT LOAD SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF MIL-STD-1323 NAVY) U&7ilLU /h/ff DATE O RIG IN ATOR NAVAL WEAPONS HANDLING CENTER WPNSTA EARLE, NEW JERSEY I PAGE, Licensed by Information Handling ServicesMIL-STD-1323 -345 1 m 7777711 0071b42 4 MIL-STD-1323-345 (

7、NAVY) PALLETIZING PROCEDURE A. THREAD STRAPPING, ITEM 5 BETWEEN DECK WIRES OF PALLET, ITFM 1. AS SHOWN IN DETAIL A. B. PLACE BOTTOM FRAME. ITEM 2. ON PALLET DECK. C. O. PLACE TOP FRAME. ITEM 3. ON THE CONTAINERS. E. POSITION THE CONTAINERS ON THE BOTTOM FRAME. POSITION STRAPPING, ITEM i, UNDER THE P

8、ALLET DECK BELOW THE 6TH AND 7TH WIRES AND AROUND THE UNIT LOAD. TENSION AND WURLE NOTCH SEAL. WITH ITEM 6. WRAP STRAPPING, ITEM 5. AROUND THE UNIT LOAD. WIRK IN ACCORDANCE WITH MIL-STO-1323. F. G. MARKING: TENSION AND WUBLE NOTCH SEAL WITH ITEM 6. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONT

9、RACT OR ORDER, THE UNIT LOAD SHALL BE MRKED IN ACCORDANCE WITH MIL-Sm-129. THREAD STRAPPING BETWEEN 6TH ANO 7TH I DETAIL NOTES: 1. UNLESS OTHERWISE SPECIFIED, THE MATERIAL SHALL BE IN ACCORDANCE WITH MIL-STD-1323. 2. DO NOT USE TYPE I STRAPPING UTH POWER MACHINES. I LIST OF MATERIALS REVIEW ACTIVTTY: NAVY-OS PREPARING ACTIVITY: NAVY-OS (PROJECT No. 81iO-N780) PAGE 2 Licensed by Information Handling Services