NAVY MIL-STD-1339 C-1990 FITTING OUT PROCEDURES - SHIPS《装配船只程序》.pdf

1、- MIL-STD-3337C IL 7777733 0070767 2 I MIL-STD-l339C(SH) 27 February 1990 SUPERSEDING 31 March 1982 (See 6.4) MIL-STD-l339B(SH) MILITARY STANDARD FITTING OUT PROCEDURES - SHIPS AMSC N4896 AREA ILSS DISTRIBUTION STATEMENT A Approved for public release; distribution is unlimited Provided by IHSNot for

2、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1339C IL 979971L 0090770 9 I MIL-STD-I339C(SH) FOREWORD 1. This military standard is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies

3、 of the Department of Dekense. 2. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy, Washington, DC 20362-5101, by using the

4、self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. 3. The purpose of this military standard is to standardize contractor- related fitting out procedures and to define contractor fitting out responsi- bilities for new constr

5、uction, conversion, and modernization shipbuilding programs. It is intended for inclusion in Naval Sea Systems Command (NAVSEA) shipbuilding contracts as appropriate. expanded to include contractor-related fitting out procedures which heretofore have been prescribed in individual ship specifications

6、. The scope of the standard has been ii Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Paragraph 1. 1.1 1.2 1.3 1.3.1 1.3.2 1.3.3 2 . 2.1 2.2 3 . 3.1 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 . MIL-STD-3337C IL 7777733 0070773 O I 3.1.6 3.1.7 3.1.8 3.1.9 3.1.10

7、 3.1.11 3.1.12 3.1.13 3.1.14 3 . 1. 1.5 3.1.16 3.1.17 3.1.18 3.1.19 3.1.20 3.1.21 3.1.22 3.1.23 3.1.24 3.1.25 3.1.26 3.1.27 3.1.28 CONTENTS Page . SCOPE . 1 Purpose 1 Scope 1 Application 1 Industrial work 1 Provisioning . 1 Nuclear propulsion . 1 REFERENCED DOCUMENTS 1 Order of precedence 1 DEFINITI

8、ONS . 2 Definitions 2 Allowance 2 Allowance appendix page (AAP) 2 Allowance appendix package (AAPG) 2 Allowance equipage list (AEL) 2 2 Asset card . 2 Authorized dental allowance list (ADAL) 2 Authorized medical allowance list (AMAL) . 2 Binning 2 Commercial and government entity (CAGE) . Component

9、2 Other Government pubiications 1 Allowance parts list (APL). hull. mechanical and electrical. ordnance, electronics APL . 2 Contract . 3 Contractor . 3 Contractor-furnished material (CFM) 3 Coordinated shipboard allowance list (COSAL) . 3 COSAL requisitioning and status procedures = Delivery . 4 El

10、ectronic accounting machine (EAM) . 4 Equipment 4 Estimated delivery date (EDD) 4 Excess in range 4 Expediting . 4 Fitting out (see “outfitting“) . 4 Follow-up 4 Funding 4 Government-furnished material (GM) 4 Incqemental stock number sequence list (ISNSL) . 4 (CRASP) . 3 Excess in depth 4 iii Provid

11、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1339C IL m 7799LL 0090772 2 I MIL-STD-l339C(SH) CONTENTS . Continued Paragraph 3.1.29 Loose hardware . 5 3.1.31 National stock number (NSN) , . 5 3.1.32 ;Naval supervising activity (NSA) . 5 3.1.33. N

12、avy item control number (NICN) 5 3.1.34 Navy ships parts control center (SPCC) . 5 3.1.35 Operating space items (OSI) . 5 3.1.30 Mockup 5 3.1.36 Outfitting (see “fitting out“) . 6 3.1.37 . Outfitting material. 6 . 3.1 s.38 Part Qr reference-number . 6 3 . -1 . 3 9 Repair part or module . 6 3.1.40 Sh

13、ortage in depth . 6 3.1.41 Shortage in range 6 3.1.42 Storage fi 3.1.43 Storeroom items (SRI) 6 3.1.44 . Stowage 6 3.2 Abbreviations and acronyms . 6 3.1.45 Unit identification code . 6 4 . . 4.1 5 . 5.1 5.1.1 5.1.1.1 5.1.1.2 5.1.1.3 5.1.2 5.1.3 5.1.3.1 5.1.4 5.1.5 5.2 5.3 5.3.1 5.3.2 5.3.3 5.3.4 5.

14、3.5 5.3.5.1 5.3.5.2 5.3.5.3 5.3.5.4 5.3.5.5 5.3.5.6 GENERAL REQUIREMENTS 8 Contractor outfitting operations 8 DETAILED REQUIREMENTS . 8 Asset records and files . 9 Initialization of BAF records. . 9 Modification of BAF records . 10 Initialization and modification of residual asset file (RAF) records

15、 . 11 Residual asset reporting., . 11 Residual asset applications 11 Cancellation of RAF orders 12 Asset accounting and verification . 12 Baseline asset file (BAF) .reconciliation 12 13 Processing of initial inventory 13 Ordering and funding . 13 Receipt. inspection, and identification 13 Storeroom

16、mockups 14 Random stowage 15 Special stowage . 15 Segregated stowage . 15 Uniquely configured items 15 Identical items 15 Storage criteria . 15 Asset management 8 Material processing . 12 Processing procedures for GOSAL SRI Preliminary storage 14 iv Provided by IHSNot for ResaleNo reproduction or ne

17、tworking permitted without license from IHS-,-,-CONTENTS . Continued Page Paragraph 5.3.5.7 5.3.5.8 5.3.5.9 5.3.5.10 5.3.5.11 5.3.5.12 5.3.6 5.3.7 5.3.8 5.3.9 5.3.10 5.4 5.4.1 5.4.2 5.4.3 5.5 5.5.1 . 5.5.2 5.5.3 5.5.4 5.5.5 5.5.6 5.5.7 5.5.8 5.6 5.6.1 5.7 5.7.1 5.7.1.1 5.7.2 5.7.2.1 5.7.3 5.7.4 5.7.

18、4.1 5.7.5 5.7.5.1 5.7.6 5.7.7 5.7.8 5.7.8.1 5.8 5.8.1 MDS Overpack Location numbers Bulkhead mounted repair parts Containers . Binning Loading Expediting and follow up . Shortage lists . Inventory accuracy . Issues of SRI Supporting GFM . Supporting CFM . Processing procedures for COSAL OS1 Ordering

19、 and funding . Segregating and storing Loading or turnover . Expediting and follow-up . Shortage lists . Inventory accuracy . Processing and integration of allowance documents COSAL and BAF changes . Ship type electronics plan (STEP) Processing of STEP items . Ships portable electrical or electronic

20、 test equipment requirements list (SPETERL) . Processing of SPETERL items Visual landing aid (VIA), meteorological (MET). and photographic (PHOTO) support . Medical and dental allowance . Processing AMAL and ADAL items . Oceanographic allowance Receipt and inspection . Library books General use cons

21、umables list (GUCL) Forms and publications (COSAL part III. section F) Processing . Loose hardware . Processing loose hardware Bins. racks and bulk stowage . Government authorization required Processing . of initial OS1 inventqry . Receipt, inspection and identification . Other significant allowance

22、 documents 15 16 16 16 16 16 16 17 17 17 17 17 17 17 18 18 18 18 19 19 20 20 20 21 21 21 22 22 22 22 22 22 22 22 22 23 23 23 23 23 23 16 . V Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1337C IL 7977711 0070774 b I MIL-STD-l339C(SH) . CONT

23、ENTS - Continued Paragraph 6. NOTES 6.1 Intended use . 6.2 Data requirements . 6.4 Changes from previous issue . 6.3 Subject term (key word) listing . APPENDIX . Vi Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1337C IL m 7777711 0070775 8

24、9 MIL-STD-1339C(SH) 1. SCOPE 1.1 PurDose. The contractor-related fitt out responsibilities. purpose of this military standard is to standardize ng out procedures and to definitize contractor fitting 1.2 ScoDe, This military standard prescribes shipbuilding contractor fitting out procedures for new c

25、onstruction, conversion and modernization ships under NAVSEA contracts, contractor. It also defines the fitting out responsibilities of the 1.3 ADDliCatiOn. This military standard is applicable to contractor responsibilities for fitting out procedures. process are items of material as specified in t

26、he authorized allowance lists and stowed in their proper locations in the ship and, equally important, standard documentation for locating each of these items. The end products of the fitting out 1.3.1 Industrial work. This military standard neither applies to nor is intended to affect the industria

27、l work performed in the ship during the period of contract performance. 1.3.2 ProvisioninK. Provisioning is the process of identifying the end item, determining the type and quantity of repair parts, special tools and test equipment to support the item based on its specific maintenance philosophy an

28、d of documenting this determination. This military standard does not alter contractor provisioning requirements. 1.3.3 Nuclear DroDulsion. The provisions of this standard do not apply to those NAVSEA nuclear propulsion equipments, components, spares and repair parts which are included in the “Q“ coo

29、rdinated shipboard allowance list (COSAL), that is, the nuclear plant COSAL. 2. REFERENCED DOCUMENTS 2.1 Other Government Publication. The following other Government publica- tion forms a part of this standard to the extent specified herein. PUBLICATION NAVAL SEA SYSTEMS COMMAND (NAVSEA) Technical S

30、pecificationc S0300-A2-SPN-010 - Procurement of Contractor-Furnished Material with National Stock Numbers (Copies of this publication required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting officer.)

31、 2.2 Order of Drecedence. In the event of a conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence. 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1339C IL W 9999911 0090

32、776 T I MIL-STD-l339C(SH) 3. DEFINITIONS 3.1 Definitions, The following definitions are cbntained in this standard or are commonly used in conjunction with outfitting procedures for naval ships. 3.1.1 Allowance. Allowance is the Government authorization for carrying an item on the ship in a designat

33、ed quantity. 3.1.2 Allowance aDDendix Rage - (AAPl. AAPs are the additional allowance documents not included in the loading COSAL. purpose as APLs and AELs. These documents serve the same 3.1.3 Allowance aDDendiX Package (AAPG). AAPG is the aggregate of allowance documents supporting requirements fo

34、r equipments and components not included and not supported in the loading COSAL. 3.1.4 Allowance eauiDage list (AEL), AEL is a technical and supply document: comprised of characteristics (description) and listings of special categories of noninstalled allowance items of a durable nature which must b

35、e on board for the ship to perform its mission (noninstalled equipage, tools, peculiar, and common support and test equipment). 3.1.5 Allowance Darts list (APL). hull. mechanical and electrical, ordnance. electronics APL. of characteristics, repair parts, sub-assemblies, special tools, and accessory

36、 components for individual hull, mechanical, electrical, electronics, and ordnance equipment or components. The APL is a technical and supply document comprised 3.1.6 Asset card. An asset card is a keypunched and interpreted electronic accounting machine card used by the contractor to report to the

37、Government residual onhand and due-in storeroom and operating space items. 3.1.7 Authorized dental allowance list (ADAL). ADAL is the allowance of dental equipment items and the minimum quantities of consumables that are to be maintained on board at all times. 3.1.8 Authorized medical allowance list

38、 (AMAL). AMAL is the allowance of medical equipment items and the minimum quantities of consumables that are to be maintained on board at all times. 3.1.9 Binning. Binning is the operation by which authorized allowance material is placed into designated shipboard stowage devices or shipboard stowage

39、 device replicas representing the ships storeroom configuration in the contractors warehouse receiving and holding area prior to loading. 3.1.10 Commercial and government entity (CAGE). A 5-digit code to identify the item manufacturer. Replaces Federal Supply Code for Manufacturers (FSCM). Component

40、 is an assembly or any combination of parts, 3.1.11 ComDonent. sub-assemblies, and assemblies mounted together, normally capable of independent operation. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1337C IL = 7777711 0070777 I I MIL-ST

41、D-l339C(SH) 3.1.12 Contract. For purposes of this standard, the contract is defined as the written agreement between the Government and the contractor for the construction, conversion, or modernization of the ship. It includes the detail specifications and all other supporting documents in effect at

42、 the time of award. It also includes all authorized and legally tendered changes issued after the time of award pursuant to the changes clause. 3.1.13 Contractor. For purposes of this standard, the contractor is the shipbuilder or other firm holding the contract. includes employees, subcontractors,

43、and subcontractors employees who may act as the contractors agents in connection with fitting out. As used herein, the term 3.1.14 Contractor-furnished material (CFM). CFM is an item furnished by the contractor under the requirements of the contract for installation into the ship or for turnover to

44、the Government for other use or disposition. includes, but is not limited to, equipment, components, assemblies, parts, tools, supplies, and materials. It 3.1.15 Coordinated shipboard allowance list (COSAL). (a) COSAL definition. A set of documents prepared by the Government for each individual ship

45、. It lists the ships hull, mechanical, electrical, electronic, and ordnance systems, equipments, and components installed to perform its operational assignment. It also identifies repair parts, special tools, and test equipment, miscellaneous portable items, and equipage and consumable items authori

46、zed for the prescribed maintenance and upkeep of the ship. COSALs are both technical and supply documents, They are techni- cal, in that equipment component equipage characteristics (name, operating characteristics, technical manuals) and maintenance, significant repair parts and special tools are d

47、escribed on APLs and AELs. They are supply documents in that the COSALs contain a consolidated list of all repair parts, special tools, test equipment, and equipage authorized to operate and maintain the above-defined systems, equipments, and components. The COSALs do not contain information relativ

48、e to provisions (food-stuffs), recreational equipment, medical material, hydrographic charts, resale clothing, ships store merchandise, and related equipment, for example, coke machines, bulk fuels and lubricants, and ammunition. lists prepared by the appropriate activity. sections will be published

49、 for forms and publications (part III, section F) and general use consumable list (GUCL) (part III, section E) (includes 90 cognizance forms). Allowances of these items are published in unique Separate COSAL (b) COSAL, loading. The final COSAL produced by the Navy prior to the contract delivery date of the ship. 3.1.16 COSAL requisitioning and status mocedures (CUSP). CRASP is a system designed for requisitioning and tra