NAVY MIL-T-17286 D-1989 TURBINES AND GEARS SHIPBOARD PROPULSION AND AUXILIARY STEAM PACKAGING OF《船弦动力和辅助蒸汽涡轮机和快速变换装置》.pdf

1、MIL-T-L728bD PA = 7779706 02820b 3 m IINCH-POUNDI MIL-T-l7286D(SH) Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy, Washing

2、ton, DC 20362-5101 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. 7 March 1989 SUPERSEDING 16 February 1965 (See 6.11) MIL-P-l7286C(SHIPS) MILITARY SPECIFICATION TURBINES AND GEARS, SHIPBOARD PROPULSION AND

3、 AUXILIARY STEAM; PACKAGING OF This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the preservation, packing and marki

4、ng requirements for shipboard propulsion and auxiliary steam turbines, gears, supply support items (spares, repair parts, and tools), accessories, and instrumentation. This specification does not apply to driven units such as generators, forced draft fans, and components and parts that come in direc

5、t contact with the primary coolant on nuclear propulsion equipment. 1.2 Levels of protection. . 1.2.1 Preservation. Level A (See 3.8.1.1) Level C (See 3.8.1.2) Commercial (See 3.8.1.3) 1.2.2 Packine;. Level A (See 3.8.2.1, 3.8.2.4.1 and 3.8.2.5.1) Level B (See 3.8.2.1, 3.8.2.4.2 and 3.8.2.5.2) Level

6、 C (See 3.8.2.1 and 3.8.2.7) Commercial (See 3.8.1.3 and 3.8.2.8) AMSC N/A AREA PACK DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. J THIS DOCUMENT CONTAINS ,T Tools and Tool Accessories for Power Driven, Metal and Woodworking Machinery. Fiber. Y 2 /- 7- 7 Provided

7、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-c . MIL-T-1728bD PA m 9779906 0282088 7 MIL-T-l7286D(SH) FEDERAL (Continued) PPP-P-291 - PPP-T- 60 E I aperboard, Wrapping and Cushioning. ape : Packaging , Waterproof. MILITARY MIL-V- 3 - MIL-C-104 - MIL-P-116

8、 - MIL-B-121 9 MIL-P-149 - MIL-R-196 - MIL-B-197 - MIL-B-233 NIL-3-3106 - MIL-C-3774 - MIL-R-5001 - MIL-R-6130 - MIL-1-8574 - MIL-C-15074 - DOD-P-15328 - MIL-C-15430 - MIL-C-15730 - MIL-E-16298 - MIL-P-16789 - MIL-1-17244 - MIL-E-17555 - MIL-S-17849 - MIL-G-18997 - MIL-P-19644 - MIL-T-19646 - MIL-R-

9、20092 - MIL-B-22019 - MIL-B-22020 - I ?alves, Fittings, and Flanges (Except for Systems kates, Wood: Lumber and Plywood, Sheathed, Nailed ?reservation, Methods of. 3arrier Material, Greaseproofed, Waterproofed, elastic Coating Compound, Strippable (Hot Dipping). iepair Parts, Accessories, and Kits,

10、Mechanical; Packaging of. Bearings, Antifriction; Associated Parts and Subassemblies; Preparation for Delivery of. Boxes, Supply Support Items, Stowage and Storage. Board, Composition, Water-Resistant, Solid (For Crates, Wood; Open 12,000 and 16,000-Pound Capacity, Rubber Cellular Sheet, Molded and

11、Hand Built Shapes: Rubber, Cellular, Chemically Blown. Inhibitors, Corrosion, Volatile, Utilization of. Corrosion Preventive, Fingerprint Remover. Primer (Wash), Pretreatment (Formula No. 117 for Condensers, Steam, Naval Shipboard. Coolers, Fluid, Naval Shipboard: Lubricating Oil, Hydraulic Oil, and

12、 Fresh Water. Electric Machines Having Rotating Parts and Associated Repair Parts: Packaging of. Pumps, (Including Prime Movers and Support Items); Packaging of. Indicators, Temperature, Direct-Reading, Bimetallic, (3-inch and 5-inch Dial). Electronic and Electrical Equipment, Accessories, and Provi

13、sioned Items (Repair Parts): Packaging of. Without Magnet). Indicated Herein); Packaging of. and Bolted. Flexible. Filler or Cushioning Pads). Latex Foam. Metals). (Metric) Strainers, Sediment, Pipeline, Duplex (With and Gauge, Pressure, Dial Indicating. Plastic Molding Material (Polystyrene Foam, E

14、xpanded Thermometers, Remote Reading, Self-Indicating Dial, Rubber or Plastic Sheets and Assembled and Molded Barrier Materials, Transparent, Flexible, Sealable, Bags, Transparent, Flexible, Sealable, Volatile Bead). Gas Actuated. Shapes, Synthetic Foam or Sponge, Open Cell. Volatile Corrosion Inhib

15、itor Treated. Corrosion Inhibitor Treated. 7 3 -f r Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-tlIL-T-L728bD PA 7797906 0282087 7 W MIL-T-l7286D(SH) MILITARY (Continued) MIL-B-22191 - Barrier Materials, Transparent, Flexible, Heat MIL-A-25175 -

16、Air Transport, Nontactical, Packing for. MIL-B-26195 - Boxes, Wood-Cleated, Skidded, Load-Bearing Base. MIL-P-26514 - Polyurethane Foam, Rigid or Flexible, for MIL-C-26861 - Cushioning Material, Resilient Type, General. MIL-C-52950 - Crates, Wood, Open and Covered. MIL-P-58102 - Plastic Sheet and La

17、minates, Flexible, for Sealable. Packaging. Environmental Protective Storage and Shipping Sys tems , MIL-C-58104 - Cover, Protective, for Parts and Equipment. MIL-F-81334 - Foam, Plastic, Flexible, Open Cell, Polyester MIL-F-87090 - Foam, Combustion Retardant, for Cushioning Supply Type, Polyurethan

18、e. Items Aboard Navy Ships. STANDARDS FEDERAL FED-STD-313 - Material Safety Data and Disposal Data for Hazardous Materials Furnished to Government Activities, - MILITARY MIL-STD-129 - Marking for Shipment and Storage. MIL-STD-740-1 - Airborne Sound Measurements and Acceptance Criteria of Shipboard E

19、quipment. MIL-STD-740-2 - Structureborne Vibratory Acceleration Measurements and Acceptance Criteria of Shipboard Equipment. MIL-STD-758 - Packaging Procedures for Submarine Repair Parts. MIL-STD-794 - Parts and Equipment, Procedures for Packaging of, MIL-STD-1186 - Cushioning, Anchoring, Bracing, B

20、locking and MIL-STD-1367 - Packaging, Handling, Storage, and Transportability Waterproofing; with Appropriate Test. Methods. Program Requirements (for Systems and Equipments). 2.1.2 Other Government rmblication. The following other Government publication forms a part of this specification to the ext

21、ent spe3cified herein. Unless otherwise specified, the issues shall be those in effect on the date of the solicitation, DEPARTMENT OF TRANSPORTATION (DOT) Code of Federal Regulations (CFR) 29, Parts 1900 through 1910 - Occupational Safety and Health Standards. (The Code of Federal Regulations (CFR)

22、and the Federal Register (FR) are for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-172bD PA 7797706 0282090 5 W (Copies

23、of specifications, standards and other Government publications required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting activity.) 2.2 Other Dublications. The following documents form a part of this s

24、pecification to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted shall be those listed in the issue of the DoDISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS shall be the issue o

25、f the nongovernment documents which is current on the date of the solicitation. AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 996 - Standard Terminology of Packaging and Distribution D 3951 - Standard Practice for Commercial Packaging. Environments. (DoD adopted) (DoD adopted) (Application for

26、 copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Nongovernment standards and other publications are normally available from the organizations which prepare or which distribute the documents. documents also may be available in

27、or through libraries or other informational services.) These 2.3 Order of precedence. When an equipment or item is acquired in confor- mance with a commodity specification, having detailed packaging or preparation for delivery requirements which differ from this specification, the packaging or prepa

28、ration for delivery specified in the commodity specification shall apply. 3. REQUIREMENTS 3.1 Definitions or explanation of Dacka$zino terms. Definitions or expia- nation of packaging terms applicable to this specification shall be as stated in the applicable referenced specification and 6.5. For de

29、finitions or explanation of packaging terms not specified therein, ASTM D 996 shall apply. - 3.2 First article. When specified in the contract or purchase order (see 6.2.1), a sample shall be subjected to first article inspection (see 4.4 and 6.3). 3.3 Materials. The materials shall be as specified

30、herein. 3.3.1 Recovered materials. Unless otherwise specified herein, all equip- ment, material, and articles incorporated in the products covered by this speci- fication shall be new and may be fabricated using materials produced from recovered materials to the maximum extent practicable without je

31、opardizing the intended use. The term “recovered materials“ means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw materials, as opposed to virgin raw materials. Unless otherwise specifically specified, none of the above shall be interpreted

32、 to mean that the use of used or rebuilt products is allowed under this specification. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-T-l7286D(SH) 3.3.2 * New materials and procedures. The use of newly developed packaging materials or procedu

33、res are encouraged and recommended and will be permitted under the conditions specified herein, provided they are equal to or better than the specified materials or procedures at no additional cost to the Government . . (see 6.2.2). 3.3.3 Asbestos, (See 6.6) 3.3.3.1 Packaging - materials. Asbestos o

34、r material and items containing asbestos shall not be used in the packaging of material or items covered by this specification (see 6.5). 3.3.3.2 Packaged - items. Asbestos and separately packaged components containing asbestos, that are predominately distributed throughout the item, shall be packag

35、ed in sealed, dustproof and siftproof packages, shall be heat sealed. Packages shall be marked as specified (see 3.8.3). Flexible packages 3.3.4 Cushioning and wrapping - materials. The use of excelsior, newspaper, shredded paper (all types including wax paper) and similar hygroscopic or non- neutra

36、l materials, and all types of loose-fill materials (for applications such as cushioning, fill, stuffing, and dunnage) shall be prohibited (see 3.8.1.1.4). Materials selected for cushioning and wrapping shall have properties (character- istics) resistant to fire. required (see 6,2.1), the system or e

37、quipment acquisition or program manager shall establish the PHST requirement. for the applicable system or equipment acquisition in accordance with The plan, when required, shall be tailored MIL-STD-1367. provided a material safety data sheet (MSDS) at the time of the contract award. The MSDS shall

38、be provided in accordance with the requirements of FED-STD-313 and 29 CFR 1910.1200, Hazard Communication Standard. When FED-STD-313 is at variance with the CFR, 29 CFR 1910.1200 shall take precedence. FED-STD-313 shall be modified and supplemented accordingly. shipment of the material covered by th

39、is specification. The MSDS shall be included with each I blies, accessories, or projecting parts which will facilitate protection of the equipment or item from damage, pilferage, loss, or reduction of cube is permitted where such removal will not affect permanent settings or alignments, and where th

40、e removed items can be readily reassembled at the installation site without the ;- /- -I_ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-L728bD PA = 7979906 0282092 9 need for special tools or gauges. Removed hardware (bolts, nuts, pins, screw

41、s, washers, and others) shall be reinstalled in the mating parts and secured to prevent loss. Removed items or parts, other than hardware, shall be packaged to the same level of protection as the basic or prime equipment. 3.5.2 Matchmarking. Removed parts or items except-hardware, shall be matchmark

42、ed to facilitate reassembly. marked, and the tags shall be attached to each mating part or item. printing thereon shall be resistant to water, oil, and fading. Removed parts or items shall be tagged and The tags and 3.6 Lubrication. Rotating joints, bearings, and similar moving parts shall be thorou

43、ghly lubricated. specification or as approved by the contracting activity. shall be removed before packing operations. The lubricant shall be as specified in the equipment Excess lubricants 3.7 Painting;. 3.7.1 Turbines. 3.7.1.1 Surfaces to be painted. External surfaces of ferrous parts which are no

44、t faying or working surfaces shall be thoroughly cleaned and coated with two coats of heat resisting paint in accordance with TT-P-28. Except that for turbine parts that never exceed 250 degrees Fahrenheit (OF) (such as support members, bases or bedplates), one coat of aluminum paint is acceptable.

45、These external surfaces shall include all pockets and voids which are not normally in contact with steam or oil during operation of the turbine (such as may exist in a bearing bracket). Paint shall be applied under attachments (such as lagging and identification plates or information plates). 3.7.1.

46、2 Surfaces and parts not to be Dainted. The following surfaces and parts shall not be painted: Valve stems. Bearings and bearing surfaces. Identification, operation, safety, operating, and general label Oil holes and grease fittings. Faying surfaces such as flange faces and spot-faces for bolting El

47、ectric wiring. Rotating parts (gear assemblies). Surfaces protected from corrosion by plating. plates. 3.7.1.3 Condition at point of delivery. The turbine and its appurtenances shall be delivered with all paint in good condition. up paint that is damaged by handling in the manufacturers plant. This

48、may require touching Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-mT-172B6D-w i i 7 i Ob O 2 B 2 O 9 3 - _- om MIL-T-l7286D(SH) 3.7.2 Gears (large - and small). 3.7.2.1 Surfaces to be Dainted. External surfaces which are not faying or working surf

49、aces shall be cleaned, free of rust, scale, oil, grease, and other surface contaminants and painted with one coat of coating pretreatment in accordance with DOD-P-15328 and one or two coats of zinc chromate primer in accordance with TT-P-645 as necessary, to provide a complete coverage. Where surface preparation is accomplished by abrasive blasting, the pretreatment in accordance with DOD-P-15328 may be omitted. 3.7.2.2 Surfa