NAVY MIL-T-24664-1986 TEST SET RADAR AN UPM-( )《AN UPM-( )雷达测试设备》.pdf

1、MIL-T-2qbbq bb M 7777706 0133075 5 M 4543 MIL-T-24664( EC) 28 May 1986 MILITARY SPECIFICATION TEST SET, RADAR, AN/UPM-( ) This specification is approved for use by the Space and Naval Warfare Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Dep

2、artment of Defense. 1. SCOPE 1.1 SCO e. This specification covers the Radar (Identification, Friend or Foe (IFF) Test Set, AN/d), hereinafter referred to as the equipment. The equipment is to be designed for both ship and shore installations for caTibration and testing of interrogators, transponders

3、 (including diversity type transponders), and other components of the Air Traffic Control Radar Beacon System (ATCRBS) IFF MK XII System (AIMS). ,/, 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications, standards, and handbook. The following specifications, standards, and handbook

4、form a part of this specification to the extent specified herein. specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. Unless otherwise SPECIFICATIONS

5、 MILITARY MIL-C- 17/30 Cable, Radio Frequency, Flexible, Coaxial, 93 Ohms, MIL-C-17/73 Cables, Radio Frequency, Flexible, Coaxial, 50 Ohms, M17/03O-RG062 M17/073-RG212 MIL-C-17/84 MIL-S-901 MIL-C-5015 MIL-P-15024 MIL-E-16400 MIL-E-17555 MIL-C-28777 MIL-T-28800 MIL-C-39012 MIL-C-39012/1 Cables, Radio

6、 Frequency, Flexible, Coaxial, 50 Ohms, Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment And Systems, Requirements For Connectors, Electrical, Circular Threaded, AN Type, General Specification For PTates, Tags And Bands For Identification Of Equipment Electronic, Interior Comnunicatio

7、n And Navigation Equipment, Naval Ship And Shore: General Specification For Electronic And Electrical Equipment, Accessories, And Provisioned Items (Repair Parts), Packaging Of Cable Assembly, Electronic Test Equipment, (3 Wires, 125 and 250 Volts AC and 28 Volts DC) Grounding Plug Connector, Genera

8、l Specification For Test Equipment For Use With Electrical And Electronic Equipment, General Specification For Connecors, Coaxial, Radio Frequency, General Specification For Connectors, Plug, Electrical, Coaxial, Radio Frequency, (Series N (Cabled); Pin Contact, Class 2) M17/084-R6223 Beneficial con

9、ments (recomendations, additions, deletions) and any pertinen data which may be of use in improving this document should be addressed to: Comnander, Space and Naval Warfare Systems Cmand (SPAWAR-003-121), Washington, DC 20363-5100, by using the self-addressed Standardization Document Improvement Pro

10、posal (DD Form 1426) appearing at the end of this document, or by letter. AMSC N/A FSC 6625 DISTRIBUTION STATEMENT A. Approved for public release; disribution is unlimited. I THIS DOCUMENT CONTAINS 4.9- - PAGES. Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or

11、 networking permitted without license from IHS-,-,-MIL-C-39012/4 MIL-C-39012/16 MIL-C-39012/21 MIL-C-39012/26 MIL-H-46855 MIL-A-55339 MIL-A-55339/20 MIL-A-55339/22 MIL-A-55339/38 MIL-A-55339/46 MIL-A-55339/47 STANDARDS MILITARY MIL-STD-12 MI L-STD-105 MI L-STD- 109 MIL-STD-415 MIL-STD-454 MIL-STD-47

12、1 MIL-STD-781 MIL-STD-1364 MIL-STD-1472 MIL-STD-1553 DoD-STD-1679 Connectors, Coaxial, Radio Frequency (Series N (Uncabledl- Receptacles-Jam Nut And Flange Mounted, Socket Contact, Class 21 Connectors, Plug, Electrical, Coaxial, Radio Frequency, (Series BNC, (Cabled), Pin Contact, Class 21 Connector

13、s, Coaxial, Radio Frequency (Series BNC (UnCabled)- Receptacles, Female, Jam Nut Mounted, Class II) Connectors, Plug, Electrical, Coaxial, Radio Frequency, (Series TNC (Cabled), Pin Contact, Class 21 Human Engineering Requirements For Military Systems, Equipment And Facil i ties Adaoter, Connector,

14、Coaxial, Radio Frequency, (Series BNC .- TO ieries NI, Class 2 Adapter, Connector, Coaxial , Radio Frequency, (Between Series BNC To Series N), Class 2, Straight Plug Adapter, Connector, Coaxial , Radio Frequency, (Between Series BNC To Series C), Class 2, Straight Plug Adapter, Connector, Coaxial ,

15、 Radio Frequency (Between Series BNC to Series TNC), Class 2, Straight Plug Adapter, Connector, Coaxial, Radio Frequency, In-Line, (Between Series SMA Jack To Series BNC Jack), Class 2 Adapter, Connector, Coaxial, Radio Frequency, In-Line, (Between Series SMA Plug To Series BNC Jack) , Cass 2 Abbrev

16、iations For Use On Drawings, And In Specifications, Standards And In Technical Documents Sampling Procedures And Tables For Inspection By Attributes Quality Assurance Terms And Definitions Test Provisions for Electronic Systems And Associated Equipment, Design Criteria For Standard General Requireme

17、nts For Electronic Equipment Maintainabil i ty Verification/Demonstration/Eval uation Reliability Design Qualification And Production Acceptance Tests: Exponential Distribution Standard General Purpose Electronic Test Equipment Human Engineering Design Criteria For Military Systems, Equlpment And Fa

18、cilities Aircraft Internal Time Division Comand/Response Mu1 tiplex Data Bus Software Development HANDBOOK MIL I TARY MIL-HDBK-241 Design Guide For Electromagnetic Interference (EMI) Reduction In Power Supplies 2.1.2 Other Government publications. The following other Government pub1 ications form a

19、part of this specification to the extent specified herein. shal be those in effect on the date of the solicitation. Unless otherwise specified, the issues PU DL I CAT I O NS DEPARTMENT OF DEFENSE DoD AIMS 64-9000 DoD AIMS 65-10008 DOD) Performance/Design And Qualification Requirements Mode 4 Input/u

20、tput KIR/KIT-lA/TSEC Technical Standard For The ATCRBS/IFF/MARK XI I Systems (AIMS) (Application for copies should be addressed to WR-ALC/MMAM-AIMS, Robins Air Force Base, GA 31098-6609 (Attn: DoD AIMS Program Office) Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

21、se from IHS-,-,-MIL-T-ZLIbbY 66 M 777770b 0333077 7 M 1 MIL-T-24664( EC) NAVAL AIR SYSTEMS COMD (NJWAIR) WS-6536D Procedures And Requirements For Preparation And Soldering Of Electrical Connections SPACE AND NAVAL WARFARE SYSTEMS COWAND (SPAWAR) NAVSHIPS 0967-146-0010 Dictionary Of Standard Termi na

22、1 Designations For Electronic Equipment (Copies of specifications, standards, handbook, and pub1 ications required by contractors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contracting activity.) extent sp-nless otherwise

23、specified, the issues of the documents which are DoD adopted shail be those listed in the issue of the DoDISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS shall be the issue of the nongovernment documents which is current on the date of

24、the solicitation. 2.2 Other publications. The following document(s1 form a part of this specification to the ELECTRONIC INDUSTRIES ASSOCIATION (EIA) EIA RS-232C-69 Interface Between Data Terminal Equipment And Data Comnunication Equipment Employing Serial Binary Data Interchange 2001 Eye Street, N.W

25、., Washington, DC 20006.) (Application for copies should be addressed to the Electronic Industries Association, INSTITUTE OF ELECTRICAL AND ELECTRONIC ENGINEERS (IEEE) IEEE STD-488-1978 Digital Interface For Programmable Instrumentation (Application for copies should be addressed to the Institute of

26、 Electrical and Electronic Engineers, 345 East 47th Street, New York, NY 10017.) NATIONAL FIRE PROTECTION ASSOCIATTON (NFPA) NFPA 70-1978 National Electrical Code (Application for copies should be addressed to the National Fire Protection Association, (Nongovernment standards and other publications

27、are normally available from the organizations 470 Atlantic Avenue, Boston, MA 02210.) which prepare or which distribute the documents. through 1 ibraries or other informational services. 1 and the references cited herein (except for associated detail specifications, specification sheets, or MS stand

28、ards), the text of this specification shall take precedence. specification, however, shall supersede applicable laws and regulations unless a specific These documents also may be available in or 2.3 Order of precedence. In the event of a conflict between the text of this specification Nothing in thi

29、s .exemption has been obtained. 3. REQUIREMENTS 3.1 General. 3.1.1 First article. hen specified in the contract or purchase order, a sample shall be 3.2 Equipment description. The equipment shall be portable type equipment in accordance with MIL-T-28800 for Type I equipment, except as hereinafter sp

30、ecified. subjected to-firste inspection (see 4.3 and 6.3). accessory compartment which contains associated cables, adapters, attenuators, and terminations necessary for testing various IFF equipments. The equipment shall consist of a test set in a case with an 3.2.1 Oscilloscope general requirements

31、. The oscilloscope portion of the equipment shall be in accordance with MIL-T-2880 O for Type II equipment, except as hereinafter specified. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3 Environmental conditions. The equipment, including the

32、oscilloscope, shall conform to the environmental requirements of MIL-T-28800 for Class 3, The enclosure shall be Style C as specified in MIL-T-28800, except the transit drop environmental condition and the stacking provisions are not required. 3.3.1 Temperature and humiditx. Except as otherwise spec

33、ified herein, the equipment shall conform to the temperature requirements of MIL-T-28800: a. Operating: not have to be maintained below Cl b. Nonoperating: -5OOC to 85OC -200 Celsius (C) to 55oC (the accuracies of this specification do 3.3.2 Altitude. Except as specified in a and b, the equipment sh

34、all conform to the altitude requi rement-T-28800 : a. Operating: O to 10,000 feet (ft) above sea level b. Nonoperating: 40,000 ft above sea level, maximum 3.3.3 Vibration. The equipment shall conform to the vibration requirements of MIL-T-28800 for Class 3 equipment. 3.3.4 Shock, The equipment shall

35、 conform to the high impact shock requirement of MIL-S-901, Grade A, principal unit, Type A. The mounting may be either Class I or Class II; however, the oscilloscope shall be installed in the equipment for either testing. The Class II mounting, if used, shall be subject to the approval of the procu

36、ring activity. With MIL-7-28800 and as specified in 3.4.1 through 3.4.3. 3.4 Parts, materials, and processes. 3.4.1 Parts. Parts shall be in accordance with 3.4.1.1 through 3.4.1.5.9. 3.4.1.1 Input and output (I/O) jacks. Type UG-62B/U jacks in accordance with MIL-C-39012/21, Parts, materials, and p

37、rocesses shall be in accordance or equivalent, shall be used for all I/O unless otherwise specified herein. All jacks shall be labled as to IN, OUT, or I/O. 3.4.1.2 Cable, coaxial (radio frequency (RF), Coaxial cable (RF) shall be in accordance with MIL-T-28800, except that double shielded, flexible

38、, coaxial cable (RF), Malco part number 250-4291-0121, or equivalent, may be used to interconnect subassembl ies within the test equipment. crystal diodevt emitting diode or vacuum florescent alphanumeric displays may be used, or a built-in di spl ay termi na1 . 3.4.1.4 Wire hooku Hookup wire shall

39、be in accordance with MIL-T-28800, except color coding of thedin the oscilloscope and interconnections between terminals of the sockets for the printed circuit boards (PCBs) will not be required. Cable harness wires shall be color coded, or seri ally numbered by hot stampi ng . 3.4.1.5.1 through 3.4

40、.1.5.9. 3.4.1.3 Readouts. Readouts shall be in accordance with MIL-T-28800, except that liquid 3.4.1.5 Accessories. Accessories and accessory storage shall be provided as specified in 3.4.1.5.1 Accessory stowage. The portable equipment front panel cover shall be provided with a means for stowage of

41、the items specified in a through f: a. Cables b. Adapters and probes c, Operators manuals d, Spare bulbs e. Extender board(s1 f. At least two interface cable assemblies The method of stowage of the accessories shall be subject to the approval of the procuring activity. 4 Provided by IHSNot for Resal

42、eNo reproduction or networking permitted without license from IHS-,-,-MIL-T-24664 66 U 7779706 0133077 2 U 3.4.1.5.2 Video test probe. Three video test probes shall be supplied. The probes shall be two Tektronix P6131 2 -Beter probes, and one Tektronix P6101A 2-meter probe, or equivalent. probe shal

43、l be suitably marked for identification. approval of the procuring activity. Each Equivalent probes shall be subject to the 3.4.1.5.3 RF cables. RF cables shall be as specified in 3.4.1.5.3.1 through 3.4.1.5.3.3. 3.4.1.5.3.1 General service cables. Two 8-ft lengths of RF cable, Type RG-223/U in acco

44、rdance with M Iype L-C- TNC male plug in accordance with MIL-C-39012/26, or equivalent, on one end and a Type N male plug in accordance with MIL-C-39012/1, or equivalent, on the other end, shall be provided. Cables shall be marked with their attenuation at 1030 megahertz ( MHz) . 3.4.1.5.3.2 High po

45、wer cable. One 10-ft length of RF cable, Type RG-212/U in accordance with MIL-C-17/73, having a Type N male plug in accordance with MIL-C-39012/1, or equivalent, on each end, shall be provided. This cable shall be marked to indicate its attenuation at 1030 MHz. MIL-C-17/84, having sufficient length

46、and connector types to connect the LOW PWR RF IN to the MAIN or AUX RF 1/0 connectors, shall be provided. 3.4.1.5.3.3 RF jumper cable. A length of RF cable, Type RG-223/U in accordance with 3.4.1.5.4 General service cables. Four 5-ft lengths of RF cable, Type RG-62A/U in accordance with MIL-C-17/30,

47、 each having a plug UG-260D/U in accordance with MIL-C-39012/16, or equivalent, on each end, shall be provided. 3.4.1.5.5 Adapters. The following adapters, or their equivalent, shall be supplied: Type Appl icabl e specification Quantity “(MI to N(F) MIL-A-55339 1 BNC(F) to SMA(F) MIL-A-55339/46 1 BN

48、C(F) to SMA(M) MIL-A-55339/47 1 BNC(F) to N (MI MIL-A-55339/20 2 BNC(F) to C (MI MIL-A-55339/22 1 TNC(F) to BNC(M) MIL-A-55339/38 2 3.4.1.5.6 Terminations. A dumny load shall be supplied with an impedance of 50 ohms, and shall be capable of dissipating 2 watts (Ml of power and shall have a Type BNC

49、male connector. Also, the video feed-through terminations specified in a and b, or their equivalent, shall be supplied. Each termination shall have a Type BNC plug on one end and a Type BNC jack on the other end, and shall be capable of dissipating 2 W. Resi stance Quantity a. 75 olms *5 percent b. 93 ohs *5 percent 2 1 3.4.1.5.7 Service test cable. The service test-cables) shall be supplied to enable powering the oscilloscope of the basic equipment when separated from the basic chassis of the e