NAVY SS-C-153 C-1974 CEMENT BITUMINOUS PLASTIC [Use In Lieu Of NAVY SS-C-00153 A (2)]《塑料沥青水泥[使用代替 海军 SS-C-00153 A (2)]》.pdf

1、ss-c-153c December 13, 1974 SUPERSEDLNG Fed. Spec. SS-C-153B September 20, 1971 I FEDERAL SPECIFICATION CEMENT, BITUMINOUS, PLASTIC Th-s spec -:ation was approved by the Commissioner, Federal Supply Service, General Servi6es Administration, for the use of all Federal agencies. 1. SCOPE AND CLASSIFIC

2、ATION 1.1 Scope. This specification covers bituminous plastic cement for trowel or knife application. 1.2 Classification. The cement shall be furnished in the following types and classes, as specifieh(see 6.2) : Type I - Asphalt base. Class A - Summer grade. Class B - Winter grade. Type II - Coal ta

3、r base. 2. APPLICABLE DOCWENTS 2,l The following documents, of the issues in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified .herein : Federal SpecificatioA: PPP-P-704 - Pails, Metal: (Shipping, Steel, 1 through 12 Gallon). Fed

4、eral Standard: Fed. Std. No. 123 - Marking for Domestic Shipment (Civil Agencies). (Activities outside the Federal Government may obtain copies of Federal Specifica- tions, Standards, and Handbooks as outlined under General Information in the Index of Federal Specifications and Standards at the pric

5、es indicated in the Index. The Index, which includes cumulative monthly supplements as issued, is for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. (Single copies of this specification and other Federal Specifications required

6、 by activities outside the Federal Government for bidding purposes are available without charge from Business Service Centers at the General Services Administration Regional Offices in Boston, New York, Washington, DC; Atlanta, Chicago, Kansas City, MO; Fort Worth, Denver, San Francisco, Los Angeles

7、, and Seattle, WA. Standards, and Handbooks, and the Index of Federal Specifications and Standards, from established distribution points in their agencies.) (Federal Government activities may obtain copies of Federal Specifications, 1 Military Standards: MIL-STD-105 - Sampling Procedures and Tables

8、for Inspection by Attributes. MIL-STD-129 - Marking for Shipment and Storage. MIL-STD-147 - Palletization Unit Loads, on 40“ x 48“ Pallets. (Copies of Military Specifications and Standards required by suppliers in connection with specific procurement functions should be obtained from the procuring a

9、ctivity or as directed by the contracting officer.) FSC 5610 THIS DOCUMENT CONTAINS 4 PAGES. 7 c_ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- ss-c-153c to the ehfied herein, effect on date of invitation for bids or request for proposal shall app

10、ly, 2.2 Other ublications. The following documents form a part of this specification Unless a specific issue is identified, the issue in American Society for Testing and Materials (ASTM) Standard: Dl40 - Bituminous Materials, Sampling. D1310 - Flash Point of Volatile Flammable Materials by Tag, Open

11、-Cup Apparatus, Test for. D2822 - Asphalt Roof Cement. (Application for copies should be addressed to the American Society for Testing and National Motor Freight TLaffSc Association, Inc., Agent: Materials, 1916 Race Street, Philadelphia, PA 19103.) National Motor Freight Classification. (Applicatio

12、n for copies should be addressed to the American Trucking Associations, Uniform Classification Eoimittes,.Agent: Inc., Tariff Order Section, 1616 P Street, NW., Washington, DC 20036.) Uniform Freight Classification. (Application for copies should be addressed to the Uniform Classification Committee,

13、 3. REQUIREMENTS 3.1. Material. 3.1.1 General The cement shall consist of a nonvolatile bituminous binder, a 3.1.1,l Binder. The binder used in type I cement shall be primarily asphalt, and Room 1106, 222 South Riverside Plaza, Chicago, IL 60606.) compatibleslvent, and an inorganic filler. binder us

14、ed in t e II cement shall be primarily coal tar, but the manufacturer is allowed to adder organic products to either of .these binders in order to produce cements having superior properties of working and endurance. 3.1.1.2 Solvent, The solvent shall have a flash point of not less than 80 degrees P

15、(26.7 degrETJ-when tested in accordance with 4.4.1. 3.1.1.3 Filler. The filler shall be a minimum of 50 percent asbestos fiber, with the remaindeisting of other suitable mineral stabilizers. in the filler shall not be less than 80 percent when tested in accordance with 4,4.4. The percentage of ash 3

16、.1.2 Type I, asphalt base. 3.1.2.1 Class A summer rade. Class A, summer grade, asphalt base cement shall contain not less th. 3.4.1 Behavior at 60 degrees C (140 degrees F). The cement shall show no blistering and not more than L inch of slipping when tested in accordance with 4.4.5.1. 3.4.2 Behavio

17、r at O degrees C (32 degrees F). There shall be no cracking of the cement, ana no separation of cement and metal, when tested and evaluated in accordance with 4.4.5.2. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the

18、 supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract order, the supplier may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved

19、by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such ins ections are deemed necessary to assure that supplies and services conform to prebcriged requirements. which isoffered for delivery at one time. . 4.3 Sam lin . Samplin

20、g for inspection shall be in accordance with MIL-STD-105, Inspecti i- l. . / r f .I 5.2.1 Civil agencies. In addition to &y specj.al markings required by the contkct or order, packages and shipping conpiners shal1,be marked in accordance wif.Fed. Std. No. 123 (see 6.2). contract or order, packages a

21、nd shipping containers shall be marked in accordance with MIL-STD-129 (see 6.2). B 5.2.2 Military activities. In addition to any special markings required by the 6. NOTES 6.1 Intended use. The cernent covered by this specification is intended for use in the construction and repair of bituminous and

22、metal roofing, flashing,.and as an expansion joint material for concrete and masonry construction. 6.2 Ordering data. Purchasers should select the preferred options permitted herein, and include the following information in procurement documents: (a) Title, number, and date of this specification. (b

23、) Type and class required (see 1.2). (c) Level of packing required (see 5.1). * (d) Marking required (see 5.2). (e) Palletizing required (see 5.1.1). MILITARY CUSTODIAN: User Activities: Military Coordinating Activity: Navy - YD Army - ME, Navy - YD Preparing activity: GSA-FSS - ., _ Civil Agency Co

24、ordinating Activities: Commerce - NBS Interior - BPA GSA-FSS, PCD U. S. GO- PRINTING OPPICE : 1975 - 585-648/1481 Orders for this publication are to be placed with General Services Administration, Price 25 acting as an agent for the Superintendent of Documents. specification to obtain extra copies and other documents referenced herein. cents each. See Section 2 of this 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-