NAVY UFGS-08 52 00-2011 WOOD WINDOWS《木制窗户》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-08 52 00 (August 2011)-Preparing Activity: NAVFAC SupersedingUFGS-08 52 00 (July 2006)UFGS-08550 (August 2001)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2011*SECTION TABLE OF CONTENTSDIVISION 08 - OPENINGSSECTION 08 52

2、 00WOOD WINDOWS08/11PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 DELIVERY AND STORAGE1.4 SUSTAINABLE DESIGN REQUIREMENTS1.4.1 Local/Regional Materials1.4.2 Environmental Data1.4.3 Forest Stewardship Council (FSC) Certification1.4.4 Plastic IdentificationPART 2 PRODUCTS2.1 MATERIALS2.1.1 Virgin Lumb

3、er2.1.2 Engineered Wood Products2.1.3 Metal Plastic _2.2 WOOD WINDOWS2.2.1 Single-Hung and Double-Hung Windows2.2.2 Awning Windows (Top Hinged)2.2.3 Casement Windows2.2.4 Horizontal-Sliding Windows2.2.5 Stationary Windows2.3 ACCESSORIES2.3.1 Adhesives2.3.2 Fasteners2.4 FINISHES2.4.1 Paint2.4.2 Vinyl

4、 (PVC) Cladding2.4.3 Aluminum Cladding2.4.3.1 Aluminum Finish2.4.3.2 Anodic Coating2.4.3.3 Organic Coating2.5 INSECT SCREENS2.6 STORM SASHSECTION 08 52 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.6.1 FinishesPART 3 EXECUTION3.1 INSTALL

5、ATION3.1.1 Wood and Wood Clad Windows3.1.2 Insect Screen3.1.3 Storm Windows3.2 ADJUSTMENTS3.3 CLEANING3.4 WASTE MANAGEMENT- End of Section Table of Contents -SECTION 08 52 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFC

6、ESA / NASA UFGS-08 52 00 (August 2011)-Preparing Activity: NAVFAC SupersedingUFGS-08 52 00 (July 2006)UFGS-08550 (August 2001)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2011*SECTION 08 52 00WOOD WINDOWS08/11*NOTE: This guide specification covers the requi

7、rements for wood windows of the following types: single-hung, double-hung, awning, casement, horizontal sliding, and non-operative (stationary window unit).Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new pro

8、ject specification sections. Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not

9、 brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. Th

10、e publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the R

11、eference Article. Also use the SECTION 08 52 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section

12、of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ALUMINUM ASSOCIATION (AA)AA DAF4

13、5 (2003; Reaffirmed 2009) Designation System for Aluminum FinishesAMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)AAMA 2603 (2002) Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and PanelsAAMA 2604 (2005) Voluntary S

14、pecification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and PanelsAAMA/WDMA/CSA 101/I.S.2/A440 (2008; Update 1 2008; Update 2 2008; Update 3 2009) North American Fenestration Standard/Specification for Windows, Doors, and SkylightsASTM

15、INTERNATIONAL (ASTM)ASTM D 1784 (2011) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) CompoundsASTM D 1972 (1997; R 2005) Standard Practice for Generic Marking of Plastic ProductsASTM D 3656 (2007) Insect Screening and Louver Cloth W

16、oven from Vinyl-Coated Glass YarnsASTM D 6007 (2002; R 2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale ChamberASTM D 6330 (1998; R 2008) Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emis

17、sions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test ConditionsSECTION 08 52 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ASTM E 1333 (2010) Determining Formaldehyde Concentrations in Air and Emission Rates f

18、rom Wood Products Using a Large ChamberASTM E 2129 (2005) Standard Practice for Data Collection for Sustainability Assessment of Building ProductsFOREST STEWARDSHIP COUNCIL (FSC)FSC STD 01 001 (2000) Principles and Criteria for Forest StewardshipGREEN SEAL (GS)GS-36 (2000) Commercial AdhesivesNATION

19、AL FENESTRATION RATING COUNCIL (NFRC)NFRC 100 (2010) Procedure for Determining Fenestration Product U-FactorsNFRC 200 (2010) Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal IncidenceSCREEN MANUFACTURERS ASSOCIATION (SMA)SMA 1004 (1987; R

20、 1998) Aluminum Tubular Frame Screens for WindowsSOUTH COAST AIR QUALITY MANAGEMENT DISTRICT (SCAQMD)SCAQMD Rule 1168 (1989; R 2005) Adhesive and Sealant ApplicationsU.S. ENVIRONMENTAL PROTECTION AGENCY (EPA)Energy Star (1992; R 2006) Energy Star Energy Efficiency Labeling SystemU.S. GREEN BUILDING

21、COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)WINDOW AND DOOR MANUFACTURERS ASSOCIATION (WDMA)WDMA I.S. 4 (2009) Water-Repellent Preservative Non-Pressure Treatment for Millwork1.2 SUBMITTALS*NOTE: Subm

22、ittals must be limited to those necessary SECTION 08 52 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-for adequate quality control. The importance of an item in the project should be one of the primary factors in determining if a submittal

23、 for the item should be required.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control sys

24、tem. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority.

25、 Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typ

26、ically are not used for Navy projects.Submittal items not designated with a “G“ are considered as being for information only for Army projects and for Contractor Quality Control approval for Navy projects.*Government approval is required for submittals with a “G“ designation; submittals not having a

27、 “G“ designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES

28、:SD-02 Shop DrawingsWood windows; G, _Indicate elevations of units, full-size sections, fastenings, methods of installation and anchorage, method of glazing, locations of operating hardware, mullion details, method and material for weatherstripping, bar and muntin layouts, method of attaching insect

29、 screens storm windows, details of installation, and connections with other work.SD-03 Product DataWood windows; G, _Documentation for Energy Star Qualifications. Engineered Wood Products; (LEED)SECTION 08 52 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

30、se from IHS-,-,-Submit documentation verifying that no urea-formaldehyde resins were used.Metal Plastic _; (LEED)Fasteners; (LEED)Submit documentation indicating percentage of post-industrial and post-consumer recycled content per unit of product. Indicate relative dollar value of recycled content p

31、roducts to total dollar value of products included in project. Adhesives; (LEED)Submit manufacturers product data, indicating VOC content. Environmental DataSD-07 CertificatesForest Stewardship Council (FSC) Certification; (LEED)SD-08 Manufacturers InstructionsWood windowsSubmit manufacturers writte

32、n instructions for installation.SD-10 Operation and Maintenance DataWood windows, Data Package 1; G, _Submit data package in accordance with Section 01 78 23 OPERATION AND MAINTENANCE DATA.Plastic IdentificationWhen not labeled, identify types in Operation and Maintenance Manual.SD-11 Closeout Submi

33、ttals Local/Regional Materials; (LEED)Submit documentation indicating distance between manufacturing facility and the project site. Indicate distance of raw material origin from the project site. Indicate relative dollar value of local/regional materials to total dollar value of products included in

34、 project.1.3 DELIVERY AND STORAGEDeliver windows to site in sealed undamaged cartons or in palletized multiple units. Protect from damage, dampness and extreme temperature or humidity changes. Store under cover in well-ventilated enclosed space. Do not store in a building under construction until co

35、ncrete, masonry, and plaster are dry. Replace defective or damaged windows.SECTION 08 52 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.4 SUSTAINABLE DESIGN REQUIREMENTS1.4.1 Local/Regional Materials*NOTE: Using local materials can help m

36、inimize transportation impacts, including fossil fuel consumption, air pollution, and labor. Using materials harvested and manufactured within a 500 mile radius from the project site contributes to the following LEED credit: MR5. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second op

37、tion if Contractor is choosing local materials in accordance with Section 01 33 29 LEED(tm) DOCUMENTATION. First option shall not be used for USACE projects. Army projects shall include second option only if pursuing this LEED credit.*Use materials or products extracted, harvested, or recovered, as

38、well as manufactured, within a 800_ kilometer 500_ mile radius from the project site, if available from a minimum of three sources.See Section 01 33 29 LEED(tm) DOCUMENTATION for cumulative total local material requirements. Window materials may be locally available.1.4.2 Environmental Data*NOTE: AS

39、TM E 2129 provides for detailed documentation of the sustainability aspects of products used in the project. This level of detail may be useful to the Contractor, Government, building occupants, or the public in assessing the sustainability of these products.*Submit Table 1 of ASTM E 2129 for the fo

40、llowing products: _.1.4.3 Forest Stewardship Council (FSC) Certification*NOTE: Use of FSC-certified wood contributes to the following LEED credit: MR7. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION.*Use FSC-certified wood where specified. Provide letter of certification signed by lumber su

41、pplier. Indicate compliance with FSC STD 01 001 and identify certifying organization. Submit FSC certification numbers; identify each certified product on a line-item basis. Submit copies of invoices bearing the FSC certification numbers.1.4.4 Plastic Identification*NOTE: The marking system indicate

42、d below is intended to provide assistance in identification of products for making subsequent decisions as to handling, recycling, or disposal.SECTION 08 52 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*Verify that plastic products to be

43、incorporated into the project are labeled in accordance with ASTM D 1972. Where products are not labeled, provide product data indicating polymeric information in Operation and Maintenance Manual. Type 1: Polyethylene Terephthalate (PET, PETE).Type 2: High Density Polyethylene (HDPE).Type 3: Vinyl (

44、Polyvinyl Chloride or PVC).Type 4: Low Density Polyethylene (LDPE).Type 5: Polypropylene (PP).Type 6: Polystyrene (PS).Type 7: Other. Use of this code indicates that the package in question is made with a resin other than the six listed above, or is made of more than one resin listed above, and used in a multi-layer combina