NAVY UFGS-09 64 00-2010 PORTABLE (DEMOUNTABLE) WOOD FLOORING《便携式(可拆卸的)木地板》.pdf

1、USACE / NAVFAC / AFCESA / NASA UFGS-09 64 00 (August 2010)-Preparing Activity: NAVFAC SupersedingUFGS-09 64 00 (April 2006)UFGS-09643 (August 2004)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 6

2、4 00PORTABLE (DEMOUNTABLE) WOOD FLOORING08/10PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 SUSTAINABLE DESIGN CERTIFICATION1.4 DELIVERY AND STORAGE1.5 STANDARD PRODUCTPART 2 PRODUCTS2.1 MATERIALS2.1.1 Wood Framing Members2.1.2 Finish Wood Flooring2.1.3 Portable Flooring Subfloor2.1.4 Floor Finish Ma

3、terial2.1.5 Kiln Drying2.1.6 Edge Grain Flooring2.1.7 Game Line Marking Materials2.1.8 Nails2.1.9 Storage Trucks2.1.10 Coating for Flooring Panels2.1.11 Moisture, Insect, and Fungi Protection2.2 FLOORING SYSTEM2.2.1 Design2.2.2 Assembly and Construction2.3 SHOP FABRICATION AND PREASSEMBLY2.3.1 Frami

4、ng2.3.2 Finished Flooring2.3.2.1 Fastening the Finished Flooring2.3.3 Preassembly2.4 SHOP FIELD SANDING, FINISHING, AND MARKING2.4.1 Sanding2.4.2 Finishing2.4.3 Game Line MarkingSECTION 09 64 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-P

5、ART 3 EXECUTION3.1 INSPECTION OF THE SUBFLOORS3.2 FIELD ASSEMBLY, INSTALLATION, DISASSEMBLY, AND STORAGE3.2.1 Assembly and Installation3.2.2 Disassembly3.2.3 Storage3.3 SCHEDULE- End of Section Table of Contents -SECTION 09 64 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permi

6、tted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09 64 00 (August 2010)-Preparing Activity: NAVFAC SupersedingUFGS-09 64 00 (April 2006)UFGS-09643 (August 2004)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION 09 64 00PORTABLE

7、DEMOUNTABLE) WOOD FLOORING08/10*NOTE: This guide specification covers the requirements for portable (demountable) wood flooring for use in enclosed multipurpose areas.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose a

8、pplicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A

9、listing of Technical Proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*NOTE: On the drawings, show:1. Elevation of top of concrete slab on which floor system is to be ins

10、talled2. Location of equipment around which flooring is to be installed3. Locations of, and structural provisions for, anchor-plate assemblies for sports equipment4. Plan of floor system showing overall dimension of portable panels, sizes and installation pattern of floor panels, and game line marki

11、ngs5. Storage spaces for floor panels and flat bed, SECTION 09 64 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-four-wheel storage trucks.*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text

12、 of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatical

13、ly place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print

14、process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN WOOD PROTECTION ASSOCIATION (AWPA)AWPA C1 (2003) All Timber Products - Preservative Treatment by Pressure Process

15、esAWPA C2 (2003) Lumber, Timber, Bridge Ties and Mine Ties - Preservative Treatment by Pressure ProcessesGREENGUARD ENVIRONMENTAL INSTITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsMAPLE FLOORING MANUFACTURERS ASSOCIATION (MFMA)MFMA AFSFSCL (2003) Athletic Floor Sealer and Finish Speci

16、fications and Conformance List #22MFMA GRHM (2000) Grading Rules for MFMA Northern Hardwood MapleSCIENTIFIC CERTIFICATION SYSTEMS (SCS)SCS Scientific Certification Systems (SCS)Indoor AdvantageSECTION 09 64 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license

17、 from IHS-,-,-1.2 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” followin

18、g a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is suffici

19、ently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Man

20、agement System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NA

21、SA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.for inf

22、ormation only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsFlooring systemSubmit drawings indicating the ov

23、erall layout, the panel numbers, and the complete details of the floor system. Include all assembly and disassembly instructions.SD-03 Product DataCertificationSD-04 SamplesWood floor unit; G; G, _SECTION 09 64 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without lic

24、ense from IHS-,-,-AccessoriesSubmit one wood floor unit, which shall consist of two completely finished, interlocked partial panels. Each partial panel shall be 915 by 915 mm 36 by 36 inches.SD-08 Manufacturers InstructionsWood flooring unit assemblyWood flooring unit storageFinishingSD-10 Operation

25、 and Maintenance DataFinish Maintenance, Data Package 1; ; G; G, _Submit in accordance with Section 01 78 23 OPERATION AND MAINTENANCE DATA.1.3 SUSTAINABLE DESIGN CERTIFICATIONProduct shall be third party certified by GEI Greenguard Indoor Air Quality Certified, SCS Scientific Certification Systems

26、Indoor Advantage or equal. Certification shall be performed annually and shall be current.1.4 DELIVERY AND STORAGEDeliver floor materials to the building site in original containers, properly assembled and thoroughly protected by providing flat-strapped wire, fiberboard protectors, blocking, and bul

27、kheading, as necessary. Before the initial assembly and erection, store the floor materials under cover in a well-ventilated, enclosed area so that the floor materials are not exposed to extreme changes in temperature and humidity. Do not store the floor materials in an enclosed area under construct

28、ion until the concrete, masonry, ceramic tile work, terrazzo, and plaster are dry.1.5 STANDARD PRODUCTThe portable (demountable) wood flooring system shall be the product of a manufacturer regularly engaged in the production of such wood flooring systems. The Contractor shall provide all accessories

29、 required for a finished installation.PART 2 PRODUCTS2.1 MATERIALS2.1.1 Wood Framing Members*NOTE: The pressure-preservative treatment specified herein shall be modified in accordance with the recommendations made by the special assistant for entomology and wood preservation assigned by NAVFAC direc

30、tives.*SECTION 09 64 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Use kiln-dried, 50 by 75 mm 2 by 3 inch (nominal size), S4S, No. 1 common and better Douglas fir or No. 2 dimension southern pine lumber. The moisture content of the lumber

31、 shall not exceed 15 percent. Provide pressure-preservative treatment of the lumber in accordance with AWPA C1 and AWPA C2.2.1.2 Finish Wood Flooring*NOTE: Select the appropriate flooring as follows: First Grade-where fine appearance is desired, e.g., churches, offices, hospitals; Second and Better

32、Grade-stores, schools, factories, and other similar locations; Third and Better Grade-recreation rooms, factories, warehouses, grain storage bins, farm buildings, and other similar locations.*The flooring shall be First Grade hard maple (acer saccharum), graded in accordance with the MFMA GRHM “Grad

33、ing Rules for Hard Maple.“ The flooring shall be 26.2 mm 33/32 inch 19.8 mm 25/32 inch thick with a 57 mm 2 1/4 inch face. The flooring shall be kiln dried, continuous tongue-and groove, and end-matched. The flooring shall be clearly stamped: First Grade Second and Better Grade Third and Better Grad

34、e. The moisture content of the flooring shall not exceed 8 percent at the time of arrival and shall be not greater than 8 to 10 8 to 9 percent when installed.2.1.3 Portable Flooring SubfloorThe subfloor shall be 12.7 mm 1/2 inch thick fir or pine plywood, C-D grade with exterior grade glue, Exposure

35、 1.2.1.4 Floor Finish MaterialThe floor finish material shall be selected by the flooring manufacturer from the latest MFMA AFSFSCL “Floor Finish List.“ The finish material shall be suitable for the service requirements imposed on the type of portable flooring specified herein.2.1.5 Kiln DryingOnly

36、flooring which has been kiln dried will be considered to be standard grade.2.1.6 Edge Grain FlooringUse edge grain hardwood flooring consisting of pieces with annual rings that range from 30 degrees horizontal to 90 degrees vertical.2.1.7 Game Line Marking MaterialsUse game line marking materials re

37、commended by the wood floor finish manufacturer.2.1.8 NailsUse coated casing nails, screw nails, staples, or nailing cleats recommended by the flooring manufacturer.SECTION 09 64 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.9 Storage

38、Trucks*NOTE: If trucks are to be used for storage of floor panels, one truck will be required for each row of floor panels. An 18 by 34 meter A 60 by 112 foot floor will have 15 rows of floor panels, will require 15 storage trucks and 48 square meters 480 square feet of floor space for storage with

39、each row approximately 1065 mm 42 incheshigh.*Use manufacturer-recommended flatbed, four-wheel roller-bearing trucks of approximately 1200 by 2400 mm 4 by 8 feet on which to stack the panels.2.1.10 Coating for Flooring Panels*NOTE: Use Group II finish for multipurpose, high-wear areas; use Group III

40、 for floors to be utilized solely for sports.*The coating shall conform to MFMA AFSFSCL “Heavy-Duty and Gymnasium Finishes for Maple, Beech, and Birch Floors“; Group II III finish.2.1.11 Moisture, Insect, and Fungi ProtectionPrior to shipment, apply to the unfinished portion of the floor system a he

41、avy coating of pigmented, moisture-repellent resin paint with additives to control moisture absorption and to prevent attack by termites and fungi.2.2 FLOORING SYSTEM2.2.1 Design*NOTE: The overall dimensions specified cover the optimum floor size for an official basketball court as required by the N

42、ational Collegiate Athletic Association (NCAA).*NOTE: The section of the project specification pertaining to the subfloor should include the requirement that the subfloor shall not vary more than 6 mm 1/4 inch within an area 3 by 3 meters 10 by 10 feet. If the intent is to install the portable floor over an existing floor, specify the 6 mm 1/4 inch tolerance in paragraph entitled “Inspection of the Subfloors.“*Design and construct the system for use over a concrete floor slab as specified in Section 03 30 00 CAST-IN-PLACE CONCR