NAVY UFGS-09 90 00-2011 PAINTS AND COATINGS《涂料和涂层》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-09 90 00 (May 2011)-Preparing Activity: NAVFAC SupersedingUFGS-09 90 00 (August 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2011*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 90 00PAINTS AND COATINGS05

2、/11PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 APPLICATORS QUALIFICATIONS1.3.1 Contractor Qualification1.3.2 SSPC QP 1 Certification1.4 QUALITY ASSURANCE1.4.1 Field Samples and Tests1.4.1.1 Sampling Procedure1.4.1.2 Testing Procedure1.4.2 Textured Wall Coating System1.4.3 Sample Textured Wall Coat

3、ing System Mock-Up1.4.4 Sustainable Design Certification1.5 REGULATORY REQUIREMENTS1.5.1 Environmental Protection1.5.2 Lead Content1.5.3 Chromate Content1.5.4 Asbestos Content1.5.5 Mercury Content1.5.6 Silica1.5.7 Human Carcinogens1.6 PACKAGING, LABELING, AND STORAGE1.7 SAFETY AND HEALTH1.7.1 Safety

4、 Methods Used During Coating Application1.7.2 Toxic Materials1.8 ENVIRONMENTAL CONDITIONS1.8.1 Coatings1.8.2 Post-Application1.9 SUSTAINABLE DESIGN REQUIREMENTS1.9.1 Local/Regional Materials1.9.2 Environmental Data1.10 SCHEDULING1.11 COLOR SELECTION1.12 LOCATION AND SURFACE TYPE TO BE PAINTED1.12.1

5、Painting IncludedSECTION 09 90 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.12.1.1 Exterior Painting1.12.1.2 Interior Painting1.12.2 Painting Excluded1.12.3 Mechanical and Electrical Painting1.12.3.1 Fire Extinguishing Sprinkler Systems

6、1.12.4 Exterior Painting of Site Work Items1.12.5 MISCELLANEOUS PAINTING1.12.6 Definitions and Abbreviations1.12.6.1 Qualification Testing1.12.6.2 Batch Quality Conformance Testing1.12.6.3 Coating1.12.6.4 DFT or dft1.12.6.5 DSD1.12.6.6 EPP1.12.6.7 EXT1.12.6.8 INT1.12.6.9 micron / microns1.12.6.10 mi

7、l / mils1.12.6.11 mm1.12.6.12 MPI Gloss Levels1.12.6.13 MPI System Number1.12.6.14 Paint1.12.6.15 REX1.12.6.16 RINPART 2 PRODUCTS2.1 MATERIALSPART 3 EXECUTION3.1 PROTECTION OF AREAS AND SPACES NOT TO BE PAINTED3.2 REPUTTYING AND REGLAZING3.3 RESEALING OF EXISTING EXTERIOR JOINTS3.3.1 Surface Conditi

8、on3.3.2 Backstops3.3.3 Primer and Bond Breaker3.3.4 Ambient Temperature3.3.5 Exterior Sealant3.3.6 Cleaning3.4 SURFACE PREPARATION3.4.1 Additional Requirements for Preparation of Surfaces With Existing Coatings3.4.2 Existing Coated Surfaces with Minor Defects3.4.3 Removal of Existing Coatings3.4.4 S

9、ubstrate Repair3.5 PREPARATION OF METAL SURFACES3.5.1 Existing and New Ferrous Surfaces3.5.2 Final Ferrous Surface Condition:3.5.3 Galvanized Surfaces3.5.4 Non-Ferrous Metallic Surfaces3.5.5 Terne-Coated Metal Surfaces3.5.6 Existing Surfaces with a Bituminous or Mastic-Type Coating3.6 PREPARATION OF

10、 CONCRETE AND CEMENTITIOUS SURFACE3.6.1 Concrete and Masonry3.6.2 Gypsum Board, Plaster, and Stucco3.6.3 Existing Asbestos Cement Surfaces3.7 PREPARATION OF WOOD AND PLYWOOD SURFACES3.7.1 New , Existing Uncoated, and Existing Coated Plywood and SECTION 09 90 00 Page 2Provided by IHSNot for ResaleNo

11、reproduction or networking permitted without license from IHS-,-,-Wood Surfaces, Except Floors:3.7.2 Wood Floor Surfaces, Natural Finish3.7.3 Interior Wood Surfaces, Stain Finish3.7.4 Water Blasting of Existing Coated Wood Surfaces:3.8 APPLICATION3.8.1 Coating Application3.8.2 Mixing and Thinning of

12、 Paints3.8.3 Two-Component Systems3.8.4 Coating Systems3.9 COATING SYSTEMS FOR METAL3.10 COATING SYSTEMS FOR CONCRETE AND CEMENTITIOUS SUBSTRATES3.11 COATING SYSTEMS FOR WOOD AND PLYWOOD3.12 PIPING IDENTIFICATION3.13 INSPECTION AND ACCEPTANCE3.14 WASTE MANAGEMENT3.15 PAINT TABLES3.15.1 EXTERIOR PAIN

13、T TABLES3.15.2 INTERIOR PAINT TABLES- End of Section Table of Contents -SECTION 09 90 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09 90 00 (May 2011)-Preparing Activity: NAVFAC SupersedingUFGS-09 90 0

14、0 (August 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2011*SECTION 09 90 00PAINTS AND COATINGS05/11*NOTE: This guide specification covers the requirements for painting of new and existing, interior and exterior substrates, including masonry, concrete

15、, metal, wood and other miscellaneous materials.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements by adding, dele

16、ting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specification are welcome

17、 and should be submitted as a Criteria Change Request (CCR).*NOTE: This Guide Specification is used in the preparation of project specifications for Department of Defense facilities: 1. Buildings;2. Related mechanical, electrical, and miscellaneous items; and3. Shore-to-ship utility connections.This

18、 guide specification WAS NOT prepared to address the requirements of routine maintenance painting although it could be modified to do so.This guide specification DOES NOT address SECTION 09 90 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

19、high-performance or specialty coating requirements, or protective coating of industrial structures or facilities, including but not limited to:1. Towers;2. Pilings;3. Pavement markings;4. Items requiring specialized treatment due to peculiar usage;5. Petroleum storage facilities;6. Water storage fac

20、ilities;7. Waterfront facilities, except shore-to-ship utility connections; and 8. HangarsIf such items are in the project they should be included in a separate section or this section should be modified accordingly. The following guide specifications are examples of those available for specific ser

21、vice conditions noted, and may be modified to provide for related service conditions:1. Section 09 97 23 METALLIC TYPE CONDUCTIVE/SPARK RESISTANT CONCRETE FLOOR FINISH. This specification covers the painting of hydraulic structures located in fresh water such as locks and dams.2. Section 09 97 13.15

22、 EPOXY/FLUOROPOLYURETHANE INTERIOR COATING OF WELDED STEEL PETROLEUM FUEL TANKS3. Section 09 97 13.27 EXTERIOR COATING OF STEEL STRUCTURES. This specification is usable for any steel structure exposed to weather, and is usable for other purposes as well, such as hangar structures, enclosed swimming

23、pool structures, and most situations requiring high-performance protective coating systems.4. Section 09 97 13.16 INTERIOR COATING OF WELDED STEEL WATER TANKS5. Section 09 97 13.15 EPOXY/FLUOROPOLYURETHANE INTERIOR COATING OF WELDED STEEL PETROLEUM FUEL TANKS. This is a three-coat epoxy system that

24、is adaptable to a wide range of high-performance protective coating requirements where there is no exposure to sunlight.This guide generally contains only two types of coating systems, solvent based and water based. If different systems are required regionally, or for special needs, modify the guide

25、 accordingly.SECTION 09 90 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in

26、the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Ref

27、erence Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specif

28、ication to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)ACGIH 0100Doc (2005) Documentation of the Threshold Limit Values and Biological Exposure IndicesASME INTERNATIONAL (ASME)A

29、SME A13.1 (2007) Scheme for the Identification of Piping SystemsASTM INTERNATIONAL (ASTM)ASTM C 920 (2011) Standard Specification for Elastomeric Joint SealantsASTM D 235 (2002; R 2007) Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)ASTM D 2824 (2006) Aluminum-Pigmented Asphal

30、t Roof Coatings, Non-Fibered, Asbestos Fibered, and Fibered without AsbestosASTM D 4214 (2007) Standard Test Method for Evaluating the Degree of Chalking of Exterior Paint FilmsASTM D 4263 (1983; R 2005) Indicating Moisture in SECTION 09 90 00 Page 6Provided by IHSNot for ResaleNo reproduction or ne

31、tworking permitted without license from IHS-,-,-Concrete by the Plastic Sheet MethodASTM D 4444 (2008) Use and Calibration of Hand-Held Moisture MetersASTM D 523 (2008) Standard Test Method for Specular GlossASTM D 6386 (2010) Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iro

32、n and Steel Product and Hardware Surfaces for PaintingASTM E 2129 (2005) Standard Practice for Data Collection for Sustainability Assessment of Building ProductsASTM F 1869 (2010) Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium ChlorideGREENGUARD ENVIRONMENTAL INS

33、TITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsMASTER PAINTERS INSTITUTE (MPI)MPI 1 (Oct 2009) Aluminum PaintMPI 10 (Oct 2009) Exterior Latex, Flat, MPI Gloss Level 1MPI 101 (Oct 2009) Epoxy Anti-Corrosive Metal PrimerMPI 107 (Oct 2009) Rust Inhibitive Primer (Water-Based)MPI 108 (Oct

34、 2009) High Build Epoxy Coating, Low GlossMPI 11 (Oct 2009) Exterior Latex, Semi-Gloss, MPI Gloss Level 5MPI 113 (Oct 2009) Exterior Pigmented Elastomeric Coating (Water Based)MPI 116 (Oct 2009) Epoxy Block FillerMPI 119 (Oct 2009) Exterior Latex, GlossMPI 13 (Oct 2009) Exterior Solvent-Based Semi-T

35、ransparent StainMPI 134 (Oct 2009) Galvanized Primer (Waterbased)MPI 138 (Oct 2009) Interior High Performance Latex, MPI Gloss Level 2SECTION 09 90 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MPI 139 (Oct 2009) Interior High Performance

36、Latex, MPI Gloss Level 3MPI 140 (Oct 2009) Interior High Performance Latex, MPI Gloss Level 4MPI 141 (Oct 2009) Interior High Performance Latex MPI Gloss Level 5MPI 144 (Oct 2009) Institutional Low Odor / VOC Interior Latex, MPI Gloss Level 2MPI 145 (Oct 2009) Institutional Low Odor / VOC Interior L

37、atex, MPI Gloss Level 3MPI 146 (Oct 2009) Institutional Low Odor/VOC Interior Latex, MPI Gloss Level 4MPI 147 (Oct 2009) Institutional Low Odor / VOC Interior Latex, Semi-Gloss, MPI Gloss Level 5MPI 151 (Oct 2009) Interior W.B. Light Industrial Coating, MPI Gloss Level 3MPI 153 (Oct 2009) Interior W

38、.B. Light Industrial Coating, Semi-Gloss, MPI Gloss Level 5MPI 154 (Oct 2009) Interior W.B. Light Industrial Coating, Gloss, MPI Gloss Level 6MPI 16 (Oct 2009) Exterior Latex-Based Solid Hide StainMPI 161 (Oct 2009) Exterior W.B. Light Industrial Coating, MPI Gloss Level 3MPI 163 (Oct 2009) Exterior

39、 W.B. Light Industrial Coating, Semi-Gloss, MPI Gloss Level 5MPI 164 (Oct 2009) Exterior W.B. Light Industrial Coating, Gloss, MPI Gloss Level 6MPI 19 (Oct 2009) Inorganic Zinc Rich PrimerMPI 2 (Oct 2009) Aluminum Heat Resistant Enamel (up to 427 C and 800 FMPI 21 (Oct 2009) Heat Resistant Enamel, G

40、loss (up to 205 degrees C and 400 degrees F), MPI Gloss Level 6MPI 22 (Oct 2009) Aluminum Paint, High Heat (up to 590 degrees C and 1100 degrees F.MPI 23 (Oct 2009) Surface Tolerant Metal PrimerMPI 26 (Oct 2009) Cementitious Galvanized Metal SECTION 09 90 00 Page 8Provided by IHSNot for ResaleNo rep

41、roduction or networking permitted without license from IHS-,-,-PrimerMPI 27 (Oct 2009) Exterior / Interior Alkyd Floor Enamel, GlossMPI 31 (Oct 2009) Polyurethane, Moisture Cured, Clear GlossMPI 39 (Oct 2009) Interior Latex-Based Wood PrimerMPI 4 (Oct 2009) Interior/Exterior Latex Block FillerMPI 42

42、 (Oct 2009) Latex Stucco and Masonry Textured CoatingMPI 44 (Oct 2009) Interior Latex, MPI Gloss Level 2MPI 45 (Oct 2009) Interior Alkyd Primer SealerMPI 46 (Oct 2009) Interior Enamel UndercoatMPI 47 (Oct 2009) Interior Alkyd, Semi-Gloss, MPI Gloss Level 5MPI 48 (Oct 2009) Interior Alkyd, Gloss, MPI

43、 Gloss Level 6MPI 49 (Oct 2009) Interior Alkyd, Flat, MPI Gloss Level 1MPI 5 (Oct 2009) Exterior Alkyd Wood PrimerMPI 50 (Oct 2009) Interior Latex Primer SealerMPI 51 (Oct 2009) Interior Alkyd, Eggshell, MPI Gloss Level 2MPI 52 (Oct 2009) Interior Latex, MPI Gloss Level 3MPI 54 (Oct 2009) Interior L

44、atex, Semi-Gloss, MPI Gloss Level 5MPI 56 (Oct 2009) Interior Oil Modified Urethane Clear GlossMPI 57 (Oct 2009) Interior Oil Modified Urethane Clear SatinMPI 59 (Oct 2009) Interior/Exterior Floor Enamel, Low GlossMPI 6 (Oct 2009) Exterior Latex Wood PrimerMPI 60 (Oct 2009) Interior/Exterior Latex F

45、loor Paint, Low GlossSECTION 09 90 00 Page 9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MPI 68 (Oct 2009) Interior/Exterior Latex Floor Enamel, GlossMPI 7 (Oct 2009) Exterior Oil Wood PrimerMPI 71 (Oct 2009) Polyurethane, Moisture Cured, Clear, F

46、latMPI 72 (Oct 2009) Polyurethane, Two Component, Pigmented, GlossMPI 77 (Oct 2009) Epoxy GlossMPI 79 (Oct 2009) Alkyd Anti-Corrosive Metal PrimerMPI 8 (Oct 2009) Exterior Alkyd, Flat, MPI Gloss Level IMPI 9 (Oct 2009) Exterior Alkyd, Gloss, MPI Gloss Level 6MPI 90 (Oct 2009) Interior Wood Stain, Semi