NAVY UFGS-23 54 19-2008 BUILDING HEATING SYSTEMS WARM AIR《建筑物采暖系统 暖空气》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-23 54 19 (April 2006)-Preparing Activity: NAVFAC SupersedingUFGS-23 54 19 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2008*SECTION TABLE OF CONTENTSDIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING

2、SECTION 23 54 19BUILDING HEATING SYSTEMS, WARM AIR11/08PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Standard Products1.4.2 Alternative Products1.4.3 Service Support1.4.4 Modification to Reference1.4.5 Nameplates1.4.6 System Diagrams1.5 DELIVERY STORAGE A

3、ND HANDLING1.6 INSTRUCTION TO GOVERNMENT PERSONNEL1.7 ACCESSIBILITYPART 2 PRODUCTS2.1 SELF CONTAINED FURNACES2.1.1 Gas-Fired Unit2.1.1.1 Gas-Burning Components2.1.1.2 Ignition System2.1.2 Oil-Fired Unit2.1.2.1 Oil-Burning Components2.1.2.2 Ignition System2.1.3 Supply Blowers2.1.4 Burners2.1.4.1 Oil

4、Burners2.1.4.2 Gas Burners2.2 VENT CONNECTIONS2.2.1 Gas-Fired Units2.2.2 Oil-Fired Units2.2.3 Vents for High Efficiency Furnaces2.2.3.1 Combustion Air Intake Vent2.2.3.2 Exhaust Vent2.3 CONTROLSSECTION 23 54 19 Page 1Provided by IHSNot for Resale-,-,-2.3.1 Thermostat2.3.2 OPTIONAL CONTROLS2.4 AUTOMA

5、TIC VENT DAMPERS2.5 HUMIDIFIERS2.5.1 Steam Spray Type2.5.2 Wetted Element Type2.5.3 Operation2.6 AIR FILTERS2.6.1 Replaceable Media Filters2.6.2 Sectional Cleanable Filters2.7 UNIT HEATERS2.8 FACTORY PAINTING2.8.1 Factory Painting of New Equipment2.9 ELECTRICAL WORKPART 3 EXECUTION3.1 INSTALLATION3.

6、1.1 Furnaces3.1.2 Automatic Vent Dampers3.1.3 Humidifiers3.1.4 Unit Heaters3.1.5 Access Panels3.1.6 Flexible Connectors3.1.7 Air Filters3.1.8 Dust Control3.1.9 Insulation3.2 FIELD PAINTING3.3 CLEANING3.4 FIELD QUALITY CONTROL3.4.1 Tests3.5 SCHEDULE3.6 TESTING, ADJUSTING, AND BALANCING3.7 PERFORMANCE

7、 TESTS3.8 OPERATING TEST3.9 FIRING TESTS3.10 FIELD TRAINING3.10.1 Field Acceptance Test Plans and Test Reports3.10.2 Field Acceptance Testing3.11 FIELD TRAINING- End of Section Table of Contents -SECTION 23 54 19 Page 2Provided by IHSNot for Resale-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-23 54 19 (

8、April 2006)-Preparing Activity: NAVFAC SupersedingUFGS-23 54 19 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2008*SECTION 23 54 19BUILDING HEATING SYSTEMS, WARM AIR11/08*NOTE: This guide specification covers the requirements for warm air heat

9、ing systems for buildings (not including Family Housing) using oil-fired or gas-fired ; vented; indirectair heating central furnaces, unit heaters, and duct heaters. It does not cover wall furnaces or floor furnaces. Warm air systems are used primarily in barracks, offices and other similar applicat

10、ions.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Co

11、mments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitte

12、d as a Criteria Change Request (CCR).*NOTE: Identical Terminology: It is highly unlikely that this UFGS will use the same terminology as CADD programs or CADD drafters. Specifier should ensure that each piece of equipment, or item, or system is identified or marked identically in the UFGS paragraphs

13、 as the item is identified on the drawings. If this is not done, confusion will result as to which specification paragraph applies to a particular item on the drawings, thereby affecting the quality of the design package.*SECTION 23 54 19 Page 3Provided by IHSNot for ResaleNo reproduction or network

14、ing permitted without license from IHSPART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, dat

15、e, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text

16、will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic d

17、esignation only.AIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE (AHRI)AHRI 640 (2005) Performance Rating of Commercial and Industrial HumidifiersAMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE)ASHRAE 52.2 (2007; Interpertation 1: 2007) Method of Testing Genera

18、l Ventilation Air-Cleaning Devices for Removal Efficiency by Particle SizeASTM INTERNATIONAL (ASTM)ASTM D 1784 (2007) Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) CompoundsASTM D 396 (2008b) Standard Specification for Fuel OilsASTM

19、 F 1040 (1987; R 2007) Standard Specification for Filter Units, Air Conditioning, Viscous - Impingement and Dry Types, ReplaceableASTM F 872 (1984; R 1990) Filter Units, Air Conditioning: Viscous-Impingement Type, CleanableSECTION 23 54 19 Page 4Provided by IHSNot for Resale-,-,-CSA AMERICA, INC. (C

20、SA/AM)CSA 2.6 (2006) Gas Unit Heater and Gas-Fired Duct FurnacesCSA Directory (updated continuously online) Certified Products ListingsCSA/AM Z21.47 (2006; Addenda A 2007; Addenda B 2008) Gas-Fired Central FurnacesCSA/AM Z21.66 (1996; R 2006) Automatic Vent Damper Devices for Use with Gas-Fired Appl

21、iancesINTERNATIONAL CODE COUNCIL (ICC)ICC IBC (2006; Errata 2006; Errata 2007; Supplement 2007; Errata 2007) International Building CodeICC IMC (2006; Supplement 2007) International Mechanical CodeICC IPC (2006; Supplement 2007) International Plumbing CodeNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATIO

22、N (NEMA)NEMA DC 3 (2003) Standard for Residential Controls - Electrical Wall-Mounted Room ThermostatsNEMA MG 1 (2007) Standard for Motors and GeneratorsNEMA MG 11 (1977; R 2007) Energy Management Guide for Selection and Use of Single Phase MotorsNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 211 (2

23、006) Chimneys, Fireplaces, Vents, and Solid Fuel-Burning AppliancesNFPA 31 (2006; Errata 2006; Errata 2007) Installation of Oil Burning EquipmentNFPA 54 (2008) National Fuel Gas CodeNFPA 58 (2007; Amendment 1 2007; Amendment 2 2007; Amendment 3 2007; Amendment 4 2008) Liquefied Petroleum Gas CodeNFP

24、A 70 (2007; AMD 1 2008) National Electrical Code - 2008 EditionNFPA 90A (2008) Standard for the Installation of Air Conditioning and Ventilating SystemsNFPA 90B (2008) Installation of Warm Air Heating and Air Conditioning SystemsSECTION 23 54 19 Page 5Provided by IHSNot for ResaleNo reproduction or

25、networking permitted without license from IHSSHEET METAL AND AIR CONDITIONING CONTRACTORS NATIONAL ASSOCIATION (SMACNA)SMACNA HVACTAB (2002, 3rd Ed) HVAC Systems - Testing, Adjusting and BalancingUNDERWRITERS LABORATORIES (UL)UL 1738 (1993; Rev thru Oct 2006) Venting Systems for Gas-Burning Applianc

26、es, Categories II, III and IVUL 296 (2003; Rev thru Feb 2006) Oil BurnersUL 441 (1996; Rev thru Aug 2006) Gas VentsUL 641 (1995; Rev thru Aug 2005) Type L, Low-Temperature Venting SystemsUL 727 (2006) Oil-Fired Central FurnacesUL 900 (2004; Rev thru Nov 2007) Standard for Air Filter Units1.2 SYSTEM

27、DESCRIPTION*NOTE: Insert statements describing performance or design requirements. Descriptions should be limited to operational properties to the extent necessary to link multiple components of a system together and interface with other systems.*This specification section specifies the requirements

28、 for warm air heating systems using oilandgas-fired, vented, indirect air heating central furnaces, and unit heaters, and duct furnaces.Requirements for related system components are specified in other sections including:Section 23 82 02.00 10 UNITARY HEATING AND COOLING EQUIPMENT 23 81 00.00 20 UNI

29、TARY AIR CONDITIONING EQUIPMENT which specifies unitary heating and cooling system requirements; Section 23 09 23 DIRECT DIGITAL CONTROL FOR HVAC AND OTHER LOCAL BUILDING SYSTEMS23 09 53.00 20 SPACE TEMPERATURE CONTROL SYSTEMNFPA 70 which specifies control system requirements;Section 33 56 10 FACTOR

30、Y-FABRICATED FUEL STORAGE TANKS33 52 10 SERVICE PIPING, FUEL SYSTEMS which specifies fuel oil system requirements;Section 23 11 25 FACILITY GAS PIPING Section 33 51 15 NATURAL-GAS / LIQUID PETROLEUM DISTRIBUTION which specifies fuel gas system requirements;Section 23 82 02.00 10 UNITARY HEATING AND

31、COOLING EQUIPMENTSection 23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMSwhich SECTION 23 54 19 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHSspecifies ductwork system requirements;Section 22 00 00, PLUMBING GENERAL PURPOSE whic

32、h specifies plumbing system requirements;Section 09 90 00 PAINTING, GENERAL, which specifies finish painting of system component surfaces not factory finished;23 05 93 TESTING, ADJUSTING AND BALANCING SMACNA HVACTAB which specifies the system TAB work.1.3 SUBMITTALS*NOTE: Review submittal descriptio

33、n (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requires Gover

34、nment approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submi

35、ttals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ fo

36、r District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Forc

37、e and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.for information only. When used, a designation following the “G“ desi

38、gnation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop Drawings*NOTE: For design-build projects, include the seismic protection design drawings requirements SECTION 23 54 19

39、 Page 7Provided by IHSNot for Resale-,-,-listed immediately below.*Seismic Design Drawings, Diagrams, and Schedules; G; G, _SD-03 Product DataSelf-contained furnaces; G; G, _Vent connections; G; G, _Controls; G; G, _Dampers; G; G, _Air filters; G; G, _Humidifiers; G; G, _Unit heaters; G; G, _Seismic

40、 isolators; G; G, _Vibration isolators; G; G, _*NOTE: For design-build projects, include the seismic protection product data requirements listed immediately below.*Seismic snubbers; G; G, _Seismic bracing; G; G, _Seismic anchors; G; G, _Spare parts data for each different item of material and equipm

41、ent specified, after approval of detail drawings and not later than _ months prior to the date of beneficial occupancy. The data shall include a complete list of parts and supplies, with current unit prices and source of supply, a recommended spare parts list for 12 months operation, and a list of t

42、he parts recommended by the manufacturer to be replaced after 1 and 3 year(s) of service.System Diagrams; G; G, _Similar ServicesSD-06 Test ReportsSelf-contained furnace - field acceptance test plan; G; G, _Self-contained furnace - field acceptance test report; G; G, _Tests; G; G, _SECTION 23 54 19

43、Page 8Provided by IHSNot for Resale-,-,-Test reports for the ductwork leak test and the performance tests in booklet form, upon completion of testing. Reports shall document phases of tests performed including initial test summary, repairs/adjustments made, and final test results.SD-08 Manufacturers InstructionsSelf-contained furnaces - installation instructionsVent connections - installation instructionsControls - installation instructionsDampers - installation instructionsAir filters - installation instructionsHumidifiers - installat