NAVY UFGS-26 56 00 00 20-2012 EXTERIOR LIGHTING.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-26 56 00.00 20 (August 2012)-Preparing Activity: NAVFAC NEWUNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2012*SECTION TABLE OF CONTENTSDIVISION 26 - ELECTRICALSECTION 26 56 00.00 20EXTERIOR LIGHTING08/12PART 1 GENERAL1.1

2、REFERENCES1.2 RELATED REQUIREMENTS1.3 DEFINITIONS1.4 SUBMITTALS1.5 QUALITY ASSURANCE1.5.1 Drawing Requirements1.5.1.1 Luminaire Drawings1.5.1.2 Poles1.5.2 Pressure Treated Wood Pole Quality1.5.3 Photometric Plan1.5.4 Design Data for Luminaires1.5.5 LED Luminaire - IES LM-79 Test Report1.5.6 LED Ligh

3、t Source - IES LM-80 Test Report1.5.6.1 Test Laboratories1.5.7 Tests for Fiberglass Poles1.5.8 Regulatory Requirements1.5.9 Standard Products1.5.9.1 Alternative Qualifications1.5.9.2 Material and Equipment Manufacturing Date1.6 DELIVERY, STORAGE, AND HANDLING OF POLES1.6.1 Wood Poles1.6.2 Concrete P

4、oles1.6.3 Fiberglass Aluminum Steel Poles1.7 SUSTAINABLE DESIGN REQUIREMENTS1.7.1 Local/Regional Materials1.7.2 Environmental Data1.7.3 Energy Efficiency1.8 WARRANTY1.8.1 LED Luminaire Warranty1.8.2 Electronic Ballast Warranty1.9 OPERATIONAL SERVICEPART 2 PRODUCTSSECTION 26 56 00.00 20 Page 1Provide

5、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1 PRODUCT COORDINATION2.2 HID, LPS, FLUORESCENT, INDUCTION AND LED LUMINAIRES2.2.1 General Requirements2.2.2 Luminaire Light Sources2.2.2.1 High Pressure Sodium (HPS) Light Sources2.2.2.2 Metal Halide (MH) L

6、ight Sources2.2.2.3 Low Pressure Sodium (LPS) Light Sources2.2.2.4 Fluorescent Light Sources2.2.2.5 Induction Light Sources2.2.2.6 LED Light Sources2.2.3 Luminaire Ballasts, Generators and Power Supply Units (Drivers)2.2.3.1 HID Ballasts2.2.3.1.1 Electronic HID Ballasts2.2.3.1.2 Magnetic HID and LPS

7、 Ballasts2.2.3.2 Fluorescent Ballasts2.2.3.2.1 T5HO Electronic Fluorescent Ballasts2.2.3.2.2 T8 Electronic Fluorescent Ballasts2.2.3.2.3 Compact Fluorescent (CFL) Electronic Ballasts2.2.3.3 Induction Generators2.2.3.4 LED Power Supply Units (Drivers)2.2.4 LED Luminaire Surge Protection2.3 OBSTRUCTIO

8、N MARKER LUMINAIRES2.4 EXTERIOR LUMINAIRE CONTROLS2.4.1 Photocell2.4.2 Timeswitch2.4.3 Lighting Contactor2.4.4 Lighting Control Relay Panel2.4.5 Motion Sensor2.4.6 Bi-level HID Controller2.5 POLES2.5.1 Concrete Poles2.5.1.1 Steel Reinforcing2.5.1.2 Tensioned Reinforcing2.5.1.3 Coating and Sleeves fo

9、r Reinforcing Members2.5.1.4 Strength Requirement2.5.1.5 Shaft Preparation2.5.2 Aluminum Poles2.5.3 Steel Poles2.5.4 Wood Poles2.5.5 Fiberglass Poles2.6 BRACKETS AND SUPPORTS2.7 POLE FOUNDATIONS2.8 EQUIPMENT IDENTIFICATION2.8.1 Manufacturers Nameplate2.8.2 Labels2.9 FACTORY APPLIED FINISHPART 3 EXEC

10、UTION3.1 INSTALLATION3.1.1 Wood Poles3.1.2 Concrete Poles3.1.3 Fiberglass Poles3.1.4 AluminumSteel Poles3.1.5 Pole Setting3.1.6 Photocell Switch Aiming3.1.7 GROUNDING3.1.8 FIELD APPLIED PAINTINGSECTION 26 56 00.00 20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without

11、license from IHS-,-,-3.2 FIELD QUALITY CONTROL- End of Section Table of Contents -SECTION 26 56 00.00 20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-26 56 00.00 20 (August 2012)-Preparing Activity: NAVFA

12、C NEWUNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2012*SECTION 26 56 00.00 20EXTERIOR LIGHTING08/12*NOTE: This guide specification covers lighting system requirements for exterior installations.This specification does not cover all possible methods or requi

13、rements for exterior lighting; therefore, designer should add special information required to suit a specific project. Industry publications exist to aid the designer in choosing the best lighting system for the project. Publications include, but are not limited to, the Illuminating Engineering Soci

14、ety (IES) HB-10, LIGHTING HANDBOOK and RP-8, RECOMMENDED PRACTICE FOR ROADWAY LIGHTING.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for projec

15、t specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements that are not required, whether or not brackets are present.Comments, suggestions and recommended changes for this guide

16、 specification are welcome and should be submitted as a Criteria Change Request (CCR).*NOTE: TO DOWNLOAD UFGS GRAPHICSGo to http:/www.wbdg.org/ccb/NAVGRAPH/graphtoc.pdf.*NOTE: This section contains the following sketches (plates) with both metric (SI) and U.S. Customary (IP) system dimensions shown.

17、SECTION 26 56 00.00 20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Do not include list of sketches, or sketches themselves, in project specifications. Use luminaire sketches as details (plates) on drawings whenever possible. If special feat

18、ures are required, do not modify sketches, but indicate these changes as notes in luminaire schedule. The “XL“ style numbers and dates should remain on the drawing details. If additional luminaire types are needed that are not covered in sketches, provide additional sketches or details on drawings,

19、but do not label as XL sketch type.Sketch No. TitleXL-1 LED Roadway LuminaireXL-2 HID/Induction Roadway LuminaireXL-3 LED Area LuminaireXL-4 HID Area LuminaireXL-5 Induction Area LuminaireXL-6 Low Pressure Sodium Area LuminaireXL-7 HID High Mast LuminaireXL-8 HID Apron/Large Sports Field LuminaireXL

20、-9 HID Sports Field LuminaireXL-10 LED Pedestrian Post Top LuminaireXL-11 HID/CFL/Induction Pedestrian Post Top LuminaireXL-12 Decorative BollardXL-13 LED Parking Garage LuminaireXL-14 HID/Induction Parking Garage LuminaireXL-15 Exterior Recessed DownlightXL-16 LED Linear Wall WashXL-17 LED Wall Pac

21、kXL-18 HID/Induction Wall PackXL-19 Decorative Wall SconceSECTION 26 56 00.00 20 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Sketch No. TitleXL-20 Aviation Obstruction LuminaireXL-21 LED Flood LuminaireXL-22 HID/Induction Flood LuminaireXL-

22、23 Direct-Set Fiberglass PoleXL-24 Direct-Set Concrete PoleXL-25 Direct-Set Steel/Aluminum PoleXL-26 Anchor Base Fiberglass PoleXL-27 Anchor Base Steel/Aluminum PoleXL-28 Anchor B ase Concrete PoleXL-29 Anchor Base Pole FoundationXL-30 Direct Set Pole Grounding DetailXL-31 Luminaire Mounting Arm Det

23、ailsXL-32 Luminaire Mounting Arm DetailsXL-33 Luminaire Mounting Bracket DetailsXL-34 Luminaire Mounting Bracket DetailsNOTE: Do not include this index in project specification.*NOTE: The following information shall be shown on the project drawings or specified in the project specifications:a. Lumin

24、aire schedule indicating luminaire type, mounting, and light source type and quantity;b. Accessories required, such as photocell, mounting brackets or arms and pole type;c. Wattage, operating voltage and frequency;d. Location and mounting height of poles or standards;e. Referenced XL sketch or detai

25、l;f. NEMA distribution type and BUG rating when SECTION 26 56 00.00 20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-applicable; andg. Extent and location of the work to be accomplished with wiring and equipment necessary for a complete insta

26、llation.*NOTE: Demolition work that involves disposal of fluorescent and HID light sources and ballasts will require the use of Section 02 84 16 HANDLING OF LIGHTING BALLASTS AND LAMPS CONTAINING PCBs AND MERCURY.*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cit

27、ed in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article

28、to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the

29、publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by the basic designation only.ALLIANCE FOR TELECOMMUNICATIONS INDUSTRY SOLUTIONS (ATIS)ATIS ANSI O5.1 (2008) Wood Poles - Specifications Errat

30、a 2009; Amendment 1 2010; Amendment 2 2011) Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic SignalsSECTION 26 56 00.00 20 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AMERICAN SOCIETY OF HEATING, REF

31、RIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE)ASHRAE 189.1 (2011; Errata 2012; Errata 2012) Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential BuildingsASHRAE 90.1 - IP (2010; INT 1 2011; Errata 2011, Errata 2011; Errata 2011, INT 2-12 2011, Errata 2011; Adde

32、nda A, B, C, G, H, J, K, O, P, S, Y, Z, BZ, CG, CI, AND DS 2012; INT 13 2012; Errata 2012, Errata 2012, Errata 2012, Errata 2012) Energy Standard for Buildings Except Low-Rise Residential BuildingsASHRAE 90.1 - SI (2010; Errata 2011; INT 2-12 2011; Errata 2011, Addenda A, B, C, G, H, J, K, O, P, S,

33、Y, Z, BZ, CG, CI, AND DS 2012, INT 13 2012; Errata 2012, Errata 2012, Errata 2012, Errata 2012) Energy Standard for Buildings Except Low-Rise Residential BuildingsAMERICAN WOOD PROTECTION ASSOCIATION (AWPA)AWPA C1 (2003) All Timber Products - Preservative Treatment by Pressure ProcessesAWPA C4 (2003

34、) Poles - Preservative Treatment by Pressure ProcessesAWPA M6 (2007) Brands Used on Forest ProductsASTM INTERNATIONAL (ASTM)ASTM A123/A123M (2009) Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel ProductsASTM A153/A153M (2009) Standard Specification for Zinc Coating (H

35、ot-Dip) on Iron and Steel HardwareASTM B108/B108M (2011) Standard Specification for Aluminum-Alloy Permanent Mold CastingsASTM B117 (2011) Standard Practice for Operating Salt Spray (Fog) ApparatusASTM C1089 (2006) Standard Specification for Spun Cast Prestressed Concrete PolesASTM E2129 (2010) Stan

36、dard Practice for Data Collection for Sustainability Assessment of Building ProductsASTM G154 (2006) Standard Practice for Operating SECTION 26 56 00.00 20 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Fluorescent Light Apparatus for UV Expos

37、ure of Nonmetallic MaterialsCALIFORNIA ENERGY COMMISSION (CEC)CEC Title 24 (1978; R 2005) Californias Energy Efficiency Standards for Residential and Nonresidential BuildingsILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IES)IES HB-10 (2011) IES Lighting HandbookIES LM-79 (2008) Electrical and P

38、hotometric Measurements of Solid-State Lighting ProductsIES LM-80 (2008) Measuring Lumen Maintenance of LED Light SourcesIES RP-16 (2010; Addendum A 2008; Addenda B Errata 2004; R 2005; Errata 2007) Roadway LightingIES TM-15 (2011) Luminaire Classification System for Outdoor LuminairesIES TM-21 (201

39、1) Projecting Long Term Lumen Maintenance of LED Light SourcesINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE 100 (2000; Archived) The Authoritative Dictionary of IEEE Standards TermsIEEE C2 (2012; Errata 2012; INT 1 2012; INT 2 2012) National Electrical Safety CodeIEEE C62.41 (1991; R

40、1995) Recommended Practice on Surge Voltages in Low-Voltage AC Power CircuitsIEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Powe

41、r CircuitsNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)ANSI ANSLG C78.41 (2006) For Electric Lamps-Guidelines for Low-Pressure Sodium LampsANSI ANSLG C78.42 (2009) For Electric Lamps: High-Pressure SECTION 26 56 00.00 20 Page 9Provided by IHSNot for ResaleNo reproduction or networking permitt

42、ed without license from IHS-,-,-Sodium LampsANSI C136.13 (2004; R 2009) American National Standard for Roadway Lighting Equipment, Metal Brackets for Wood PolesANSI C136.21 (2004; R 2009) American National Standard for Roadway and Area Lighting Equipment - Vertical Tenons Used with Post-Top-Mounted

43、LuminairesANSI C136.3 (2005; R 2009) American National Standard for Roadway and Area Lighting Equipment Luminaire AttachmentsANSI C78.1381 (1998) American National Standard for Electric Lamps - 250-Watt, 70 Watt, M85 Metal-Halide LampsANSI C82.11 (2002) American National Standard for High-Frequency

44、Fluorescent Lamp Ballasts-SupplementsANSI C82.4 (2002) American National Standard for Ballasts for High-Intensity-Discharge and Low-Pressure Sodium (LPS) Lamps (Multiple-Supply Type)ANSI/ANSLG C78.43 (2007) American National Standard for Electric Lamps - Single-Ended Metal-Halide LampsANSI/NEMA C78.LL 1256 (2003) Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP)NEMA 250