NAVY UFGS-32 96 00-2010 TRANSPLANTING EXTERIOR PLANTS《移植外部植物》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-32 96 00 (February 2010)-Preparing Activity: NAVFAC SupersedingUFGS-32 96 00 (July 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 32 - EXTERIOR IMPROVEMENTSSECTION 32 96 00TRANS

2、PLANTING EXTERIOR PLANTS02/10PART 1 GENERAL1.1 REFERENCES1.2 RELATED REQUIREMENTS1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 State Landscape Contractors License R 2007) pH of SoilsASTM D 5539 (1994; R 2008) Seed Starter MixASTM D 6155 (2006) Nontraditional Coarse Aggregate for Bituminous Paving Mixture

3、sFOREST STEWARDSHIP COUNCIL (FSC)FSC STD 01 001 (2000) Principles and Criteria for Forest StewardshipTREE CARE INDUSTRY ASSOCIATION (TCIA)TCIA A300P1 (2008) ANSI A300 Part1: Tree Care Operations - Trees, Shrubs and Other Woody Plant Maintenance Standard Practices - PruningTCIA Z133.1 (2006) American

4、 National Standard for Arboricultural Operations - Pruning, Repairing, Maintaining, and Removing Trees, and Cutting Brush - Safety RequirementsU.S. DEPARTMENT OF AGRICULTURE (USDA)DOA SSIR 42 (1996) Soil Survey Investigation Report SECTION 32 96 00 Page 5Provided by IHSNot for ResaleNo reproduction

5、or networking permitted without license from IHS-,-,-No. 42, Soil Survey Laboratory Methods Manual, Version 3.0U.S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)1.2 RELATED REQUIREMENTSS

6、ection 02 41 00 DEMOLITION AND DECONSTRUCTION, Section 31 00 00 EARTHWORK, Section 32 84 24 IRRIGATION SPRINKLER SYSTEMS, Section 32 92 19 SEEDING, Section 32 92 23 SODDING, Section 32 92 26 SPRIGGING, Section 32 93 00 EXTERIOR PLANTS and Section 32 05 33 LANDSCAPE ESTABLISHMENT applies to this sect

7、ion for requirements, with additions and modifications herein.1.3 SUBMITTALS*NOTE: Submittals must be limited to those necessary for adequate quality control. The importance of an item in the project should be one of the primary factors in determining if a submittal for the item should be required.A

8、 “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submitt

9、al is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the

10、 Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy proje

11、cts.Submittal items not designated with a “G“ are considered as being for information only for Army projects and for Contractor Quality Control approval for Navy projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contracto

12、r Quality Control approval.for information only. When used, a designation following the SECTION 32 96 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-“G“ designation identifies the office that will review the submittal for the Government. Th

13、e following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-01 Preconstruction SubmittalsState Landscape Contractors License (LEED)Mulches Topdressing; (LEED)Ground StakesHose; (LEED)Documentation indicating percentage of post-industrial and post-consumer recycled cont

14、ent per unit of product. Indicate relative dollar value of recycled content products to total dollar value of products included in project. Local/Regional Materials; (LEED)Documentation indicating distance between manufacturing facility and the project site. Indicate distance of raw material origin

15、from the project site. Indicate relative dollar value of local/regional materials to total dollar value of products included in project. PeatComposted DerivativesRotted ManureOrganic Mulch MaterialsDocumentation indicating type of biobased material in product and biobased content. Indicate relative

16、dollar value of biobased content products to total dollar value of products included in project. Staking MaterialGround StakesDocumentation certifying products are from salvaged/recovered lumber sources and indicating percentage of salvaged/recovered content per unit of product.SECTION 32 96 00 Page

17、 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-06 Test ReportsSoil Test; Soil Test of current growing area; Soil Test of proposed area; Soil Test location mapPercolation Test; Percolation Test of current growing area; Percolation Test of propos

18、ed areaSD-07 CertificatesForest Stewardship Council (FSC) Certification1.4 QUALITY ASSURANCE1.4.1 State Landscape Contractors License classification; caliper; and height.1.4.5 Pre-Installation MeetingConvene a pre-installation meeting a minimum of one week prior to commencing work of this section. R

19、equire attendance of parties directly affecting work of this section. Review conditions of operations, procedures and coordination with related work. Agenda shall include the following:a. Tour, inspect, and discuss conditions of planting materials.b. Review planting schedule and maintenance.c. Revie

20、w required inspections.SECTION 32 96 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-d. Review environmental procedures.1.4.6 Soil TestCommercial test from an independent testing laboratory according to the Organic Carbon, 6A, Chemical Analy

21、sis Method described in DOA SSIR 42 including basic soil groups (sand, silt, clay, pH (ASTM D 4972), soluble salts), secondary nutrient groups (calcium, magnesium, sodium, Sodium Absorption Ratio (SAR), micronutrients (zinc, manganese, iron, copper). Soil required for each test shall include a maxim

22、um depth of 450 mm 18 inches of approximately 1 liter 1 quart volume for each test. Areas sampled should not be larger than 0.4 hectare 1 acre and should contain at least 6-8 cores for each sample area and be thoroughly mixed. Problem areas should be sampled separately and compared with samples take

23、n from adjacent non-problem areas. The location of the sample areas should be noted and marked on a parcel or planting map for future reference.1.4.7 Percolation TestImmediately following rough grading operation, identify a typical location for one of the largest trees and or shrubs and excavate a p

24、it per the project details. Fill the pit with water to a depth of 300 mm 12 inches. The length of time required for the water to percolate into the soil, leaving the pit empty, shall be measured by the project Landscape Architect and verified by the Contracting Officer. Within six hours of the time

25、the water has drained from the pit, the Contractor, with the Contracting Officer and project Landscape Architect present, shall again fill the pit with water to a depth of 300 mm 12 inches. If the water does not completely percolate into the soil within 9 hours, a determination shall be made and sub

26、mitted by the Contractor and verified and approved by the Contracting Officer, whether a drainage system or a soil penetrant will be required for each tree and or shrub being transplanted.1.5 DELIVERY OF MATERIALS1.5.1 Soil Conditioners Delivery and StorageSoil conditioners shall be delivered to the

27、 site in the original, unopened containers bearing the manufacturers chemical analysis. In lieu of containers, soil conditioners may be furnished in bulk. A chemical analysis shall be provided for bulk deliveries. Store in dry locations and away from contaminants.1.6 PLANT MATERIAL IDENTIFICATIONPla

28、nt material to be transplanted shall be tagged and/or shown on drawings. Transplanted plant material shall be delivered with attached, durable, waterproof labels and weather-resistant ink or imprinted tags, stating the correct botanical and common plant name and size.1.7 INSPECTION OF MATERIALSMater

29、ials shall be inspected for compliance with paragraph PRODUCTS and paragraph PLANT MATERIAL IDENTIFICATION. Open soil amendment containers or wet soil amendments shall be rejected. Topsoil that contains slag, cinders, stones, lumps of soil, sticks, roots, trash or other material larger than 40 mm 1-

30、1/2 inch diameter shall be rejected. Topsoil that contains viable plant material and plant parts shall be rejected. SECTION 32 96 00 Page 9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Unacceptable material shall be removed from the job site. The C

31、ontracting Officer reserves the right to refuse any unacceptable plant material. All rejected plant material shall be remove from the job site on the day of rejection.1.8 HANDLING OF PLANT MATERIALSMaterials shall not be dropped from vehicles. Plant material shall be transported without scarring tru

32、nks or deforming crown branching. Materials found to be in unacceptable condition shall be replaced at no additional cost to the Government.1.9 TIME LIMITATIONThe time limitation from digging, removing, transporting, to installing transplanted plant material shall be the same day. The time limitatio

33、n between installing the plant material and placing the mulch shall be a maximum 48 hours. If project conditions prevent the Contractor from transplanting and installing plant material on the same day, plant materials shall be boxed or heeled in as required. Plant material shall be maintained and pr

34、otected by the Contractor.1.10 GUARANTEETransplanted plant material shall have a guarantee period of 365 days_. All plants that die or have 25 percent or more of their branches that die during the construction operations or the guarantee period, shall be replaced in kind in relation to size and spec

35、ies during the planting season from _ to _.1.11 TRANSPLANTED PLANT MATERIAL TIME AND CONDITIONS*NOTE: Project specific climate and conditions, nationally or internationally, will dictate the optimal times for transplanting. Contact the local agricultural office for this information.Root pruning time

36、s should be planned a minimum of one year in advance for specimen trees and as recommended by the design professional for other plant materials and conditions.*Coordinate installation of planting materials during optimal planting seasons for each type of plant material required.1.11.1 Deciduous Plan

37、t Material TimeDeciduous plant material shall be transplanted from _ to _.1.11.2 Evergreen Plant Material TimeEvergreen plant material shall be transplanted from _ to _.1.11.3 Transplanting ConditionsAll transplanting operations shall be performed only during periods when beneficial results can be o

38、btained. When drought, excessive moisture, SECTION 32 96 00 Page 10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-frozen ground or other unsatisfactory conditions prevail, the work shall be stopped when directed. When special conditions warrant a va

39、riance to all transplanting operations, proposed transplanting times shall be submitted for approval. The installing site for the plant material shall be prepared and excavated in accordance with paragraph SITE EXCAVATION, prior to removing the plant material. If project conditions prevent the Contr

40、actor from transplanting and installing plant material on the same day, plant material shall be boxed or heeled in as required. Plant material shall be maintained by the Contractor until a suitable planting time.1.11.4 Underground UtilitiesThe location of underground utilities and facilities at both

41、 the removal and installing sites shall be verified and marked. Damage to underground utilities and facilities shall be repaired at the Contractors expense.1.11.5 Protecting Existing VegetationWhen there are established lawns at either the removal or installing sites, the turf shall be protected dur

42、ing the operation. Existing trees, shrubs, and plant beds at the removal andor installing sites that are to be preserved shall be barricaded and protected from damage by a tree barricade or other measure. Damage to existing plant material shall be mitigated by the Contractor at no additional cost to

43、 the Government. Damage shall be accessed by a state certified arborist or other approved professional using the National Arborist Associations tree valuation guideline.1.11.6 Protection of Plant Material to be TransplantedContractor shall protect plant material slated for transplanting that is not

44、transplanted at the beginning of construction operations. Prior to construction operations, Contractor shall tag plants to be transplanted with plastic or vinyl tape tied to the plant caliper. Plants to be transplanted shall be protected from root compaction and any other damage (with barrier of met

45、al poles a maximum of 2.5 meters 8 feet on center with plastic fluorescent netting) at a minimum of 6 meter 20 foot diameter from outside of the plants trunk prior to the start of any construction operations. Where tree drip lines are greater than 3 meter 10 feet from the trees trunk, locate barrier

46、 fencing at the drip line of the tree. Plastic tape and barrier fencing shall not be removed until transplanting operations are ready to begin and or instructed by the Contracting Officer. Contractor shall water and prune plant material as necessary to keep healthy and vigorous, particularly when wa

47、ter is shut off. Contractor shall be responsible for watering existing plant material to be transplanted from the start of construction operations until the maintenance period is over or until regular irrigation water service is in working order. Outside storage locations shall be continually shaded and protected from the wind. Bare root plants shall be heeled in. Plants stored on the project shall be pro