NAVY UFGS-34 43 00 00 20-2010 AIRFIELD LIGHTING《飞机场照明》.pdf

1、*USACE / NAVFAC / AFCESA / NASA UFGS-34 43 00.00 20 (February 2010)-Preparing Activity: NAVFAC Superseding UFGS-34 43 00.00 20 (August 2008)UFGS-16522N (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL datedJanuary 2010*SECTION TABLE OF CONTENTSDIVISION 34 - TR

2、ANSPORTATIONSECTION 34 43 00.00 20AIRFIELD LIGHTING02/10PART 1 GENERAL1.1 REFERENCES1.2 RELATED REQUIREMENTS1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 Qualifications1.4.2 Regulatory Requirements1.4.3 Installer Qualifications1.4.4 Construction Outage Plan1.5 EXTRA MATERIALS1.5.1 Oil Fuses1.5.2 Sequence

3、d Flashing Light System1.6 EQUIPMENT1.6.1 Equipment for Silicone Sealant1.7 EXISTING AIRFIELD LIGHTING SYSTEMSPART 2 PRODUCTS2.1 ELECTRICAL TAPE2.2 NAMEPLATES2.3 CONDUIT, CONDUIT FITTINGS, AND BOXES2.3.1 Rigid Steel or Intermediate Metal Conduit (IMC) and Fittings2.3.2 Flexible Metal Conduit2.3.3 Ou

4、tlet Boxes for Use with Steel Conduit, Rigid or Flexible2.3.4 Plastic Duct for Concrete Encased Burial2.3.5 Plastic Conduit for Direct Burial2.3.6 Frangible Couplings and Adapters2.3.6.1 Frangible Couplings for Specialized Applications2.3.6.2 Electrical Metallic Tubing2.4 WIRE AND CABLE2.4.1 Conduct

5、or Sizes2.4.2 Low Voltage Wire and Cable2.4.3 Power Cables for Use in Airfield Lighting2.4.4 Wire and Cable for Airfield Lighting SystemsSECTION 34 43 00.00 20 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.4.4.1 Airfield Lighting Cable2.4.4

6、.2 Cable for Pavement Slot Installation2.4.4.3 Counterpoise Wire2.4.4.4 Control Cable2.4.4.5 Fused Cable Connectors2.4.4.6 Cable for Sequence Flashing Trigger Circuits2.4.5 Cable Tags2.4.6 Concrete Markers for Direct Buried Cable Systems2.5 GROUND RODS2.6 ROTATING LIGHT BEACON2.6.1 Power Supply2.7 H

7、ELIPORT LIGHT BEACON2.8 OBSTRUCTION MARKER LIGHTS2.9 HIGH/MEDIUM INTENSITY OBSTRUCTION LIGHTS2.9.1 High Intensity Lighting2.9.2 Medium Intensity Lighting2.9.3 Solid State Flasher2.10 EXTERNALLY LIGHTED WIND CONE2.11 RUNWAY DISTANCE AND ARRESTING GEAR MARKERS2.11.1 Power Supply and Lamps2.11.2 Arrest

8、ing Gear Markers2.12 TRANSFORMERS2.12.1 Encapsulated Isolating Transformers2.12.1.1 Transformers for Frangible Towers2.12.2 Power Transformers2.13 LIGHT BASES2.13.1 Accessories2.14 SEALING FIXTURES AND WIRES IN DRILLED HOLES OR SAW KERFS2.14.1 Sealant Type2.14.2 Single Component Cold-Applied Silicon

9、e2.15 CONSTANT CURRENT REGULATORS2.15.1 Regulator2.15.2 Basic Impulse Level (BIL)2.16 LAMPS AND FILTERS2.17 SUMP PUMPS FOR MANHOLES AND VAULTS2.18 OIL FUSE CUTOUTS2.19 TRANSFORMERS, SUBSTATIONS AND SWITCHGEAR2.20 EMERGENCY GENERATOR AND AUTOMATIC TRANSFER SWITCH SYSTEM2.21 CIRCUIT SELECTOR CABINETS2

10、.22 PILOT RELAY PANEL2.23 CONTROL TRANSFER PANEL2.24 CONTROL PANEL2.25 LIGHTNING ARRESTERS2.26 WHEELS-UP SYSTEM2.26.1 Wheels-Up Light Fixtures2.26.2 Light Dimmer2.26.3 Wheels Watch Control Panel2.27 WAVE-OFF SYSTEM2.27.1 Wave-off Strobe Lights2.27.2 Wave-Off Control Cabinet2.27.3 Pad-mounted Transfo

11、rmer, 15_ kVA, 13-Phase, Low Profile2.27.4 Safety Switches, Panelboard, and Transformer2.27.5 Photo-Electric Switch2.27.6 Equipment Pad2.28 APPROACH LIGHTING SYSTEM2.28.1 Lighting Fixtures Except Flashing Units2.28.2 Sequenced Flashing Light System2.28.2.1 Pad-Mounted TransformerSECTION 34 43 00.00

12、20 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.28.2.2 Surge Protection2.28.3 Low-Impact-Resistant Towers2.28.4 Semi-Frangible Supports2.29 RUNWAY AND TAXIWAY LIGHTING SYSTEMS2.29.1 Runway Edge Lights2.29.2 Runway Threshold Lights2.29.3 Ci

13、rcling Guidance Lights2.29.4 Runway End Identification Lights2.29.5 Runway Centerline Lights2.29.5.1 Standard Duty Centerline Lights2.29.6 Runway Touchdown Zone Lights2.29.7 Taxiway Edge Lights2.29.8 Taxiway Centerline Lights2.29.8.1 Straight Centerline Sections2.29.8.2 Curved Centerline Sections2.2

14、9.8.3 Taxiway Intersections2.29.8.4 Hook Resistant Lights2.29.9 Taxiway Hold Lights2.29.10 Taxiway Guidance Signs2.30 SIMULATED CARRIER DECK LIGHTING SYSTEM2.30.1 Light Fixtures2.30.2 Junction Boxes and Terminal Boxes in Manholes or Handholes2.30.3 Landing Signal Officer (LSO) Control Panel2.31 CONN

15、ECTORS2.32 MEDIUM INTENSITY APPROACH LIGHTING SYSTEM2.32.1 Semiflush Steady-Burning Lights2.32.1.1 Encapsulated Stepdown Transformer2.32.2 Elevated Fixtures2.32.3 Sequenced Flasher Units2.32.4 Accessory Equipment2.32.5 Low Impact Resistant Towers2.33 HELIPAD LIGHTING SYSTEM2.33.1 Perimeter Lights an

16、d Landing Direction Lights2.33.2 Approach Direction Lights2.33.3 Floodlights2.34 PRECISION APPROACH PATH INDICATOR (PAPI)2.34.1 Light Units2.35 PAINTINGPART 3 EXECUTION3.1 ELECTRICAL REQUIREMENTS3.1.1 Electrical Metallic Tubing3.2 CONCRETE3.3 AIRFIELD MANHOLES AND HANDHOLES3.4 EARTHWORK3.5 GROUNDING

17、3.6 CABLE MARKERS3.7 FRANGIBLE REQUIREMENTS3.7.1 Approach System Frangibility3.8 ELEVATED AIRFIELD LIGHTS3.9 SEMIFLUSH AIRFIELD LIGHTS3.10 WIRES, FIXTURES, AND ENCLOSURES IN SAW KERFS OR DRILLED HOLES3.10.1 Holes for Light Fixtures3.10.2 Holes for Transformer Enclosures3.10.3 Saw Kerfs and Splice Ch

18、ambers3.10.4 Sandblasting3.10.5 Cleaning3.10.6 Lighting Fixture InstallationSECTION 34 43 00.00 20 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.10.7 Installation of Circuit Wires in Pavement3.11 SPLICES FOR AIRFIELD LIGHTING CABLE3.11.1 Co

19、nnectors3.11.2 Splicing Fixtures to the Wires in Pavement Saw Kerfs3.12 GROUNDING SYSTEMS3.12.1 Counterpoise Installation3.12.2 Fixture Grounding3.13 MARKING AND LIGHTING OF AIRWAY OBSTRUCTIONS3.13.1 Painting of Airway Obstructions3.13.2 Obstruction Marker Lights3.14 ROTATING LIGHT BEACON3.14.1 Beam

20、 Adjustment3.14.2 Power Supply and Wiring3.15 HELIPORT LIGHT BEACON3.15.1 Beam Adjustment3.15.2 Power Supply and Wiring3.16 WIND DIRECTION INDICATORS3.17 ISOLATION TRANSFORMERS3.18 RUNWAY AND TAXIWAY LIGHTING SYSTEMS3.18.1 Runway and Taxiway Centerline Lights3.18.2 Touchdown Zone Lighting Installati

21、on3.18.3 Circuit Selector Cabinets3.19 SIMULATED CARRIER DECK LIGHTING SYSTEM3.19.1 Light Fixtures3.19.2 Isolation Transformers3.19.3 Equipment in Control Tower, Vault, Manhole, and Handholes3.19.4 Wire and Connectors3.20 APPROACH LIGHTING SYSTEM3.20.1 Frangible Requirements3.20.2 Alignment3.21 FIEL

22、D QUALITY CONTROL3.21.1 Operating Test3.21.2 Electromagnetic Interference3.21.3 Distribution Conductors, 600-Volt Class3.21.4 Counterpoise System Test and Inspection3.21.5 Progress Testing for Series Airfield Lighting Circuits3.21.6 Electrical Acceptance Tests3.21.6.1 Low Voltage Continuity Tests3.2

23、1.6.2 High Voltage Insulation Resistance Test3.21.6.3 Operating Test3.21.7 Constant Current Regulators3.21.7.1 Visual Examination3.21.7.2 Electric Tests- End of Section Table of Contents -SECTION 34 43 00.00 20 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

24、e from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-34 43 00.00 20 (February 2010)-Preparing Activity: NAVFAC Superseding UFGS-34 43 00.00 20 (August 2008)UFGS-16522N (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL datedJanuary 2010*SECTION 34 43 00.00 20AIRF

25、IELD LIGHTING02/10*NOTE: This guide specification covers the requirements for airfield lighting including transformers, light fixtures, underground wiring, controls, regulators, and all other associated equipment.Edit this guide specification for project specific requirements by adding, deleting, or

26、 revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the

27、 technical proponent of the specification. A listing of Technical Proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*NOTE: Depending on the specific application, additiona

28、l technical sections will probably have to be added to the project specification. The construction drawings and specifications establish the scope for the construction project. Electrical drawings shall include: a legend dedicated to the airfield lighting fixtures; an airfield map depicting runways,

29、 and electrical vaults; demolition plans, single line electrical riser diagrams, schematic diagrams for fixture wiring, conduit and duct bank schedules; cable schedule, and a fixture schedule; and construction installation details for each airfield lighting fixture.Where an option is given for milit

30、ary and FAA specifications, the SECTION 34 43 00.00 20 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-electrical designer of the specific project shall determine if the project requires a military specification component without option for the

31、 FAA specification. Where the words “as indicated,“ “as specified,“ “unless specified otherwise,“ “when specified,“ or similar words are used, the designer shall ensure that the appropriate requirements are included in the project drawings or specifications. The drawings should show new portions of

32、the work on existing airfields and should indicate clearly the existing wires, cables, ducts, and equipment as applicable. The designer should refer to the NAVAIR 51-50AAA-2, “General Requirements for Shore Based Airfield Marking and Lighting.“ Electrical Designer shall specify Primary type I or Sec

33、ondary type II Class A or Class B electrical cable system. Designer must specify FAA style for the cable/receptacle system. Connectors shall be certified by ETL.*PART 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publi

34、cations are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Referenc

35、e Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below

36、 form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM B 209 (2007) Standard Specification for Aluminum and Aluminum-Alloy Sheet and PlateASTM B 209M (2007) Standard Specification for A

37、luminum and Aluminum-Alloy Sheet and Plate (Metric)ASTM B 3 (2001; R 2007) Standard Specification for SECTION 34 43 00.00 20 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Soft or Annealed Copper WireASTM B 8 (2004) Standard Specification for

38、Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or SoftASTM C 603 (2004; R 2008) Extrusion Rate and Application Life of Elastomeric SealantsASTM C 639 (2001; R 2007) Rheological (Flow) Properties of Elastomeric SealantsASTM C 661 (2006) Indentation Hardness of Elastomeric-Type Sealants

39、 by Means of a DurometerASTM C 679 (2003; R 2009e1) Tack-Free Time of Elastomeric SealantsASTM C 719 (1993; R 2005) Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)ASTM C 792 (2004; R 2008) Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elast

40、omeric SealantsASTM C 793 (2005) Effects of Accelerated Weathering on Elastomeric Joint SealantsASTM D 1248 (2005) Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and CableASTM D 1535 (2008) Specifying Color by the Munsell SystemASTM D 412 (2006ae2) Standard Test Method

41、s for Vulcanized Rubber and Thermoplastic Elastomers - TensionASTM D 709 (2001; R 2007) Laminated Thermosetting MaterialsINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE C2 (2007; TIA 2007-1; TIA 2007-2; TIA 2007-3; TIA 2007-4; TIA 2007-5) National Electrical Safety CodeIEEE C62.11 (2005

42、; Amendment A 2008) Standard for Metal-Oxide Surge Arresters for Alternating Current Power Circuits (1kV)IEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) Recommended Practice on SECTION 34 43 00.00 20 Page 7Provided b

43、y IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Characterization of Surges in Low-Voltage (1000 V and Less) AC Power CircuitsNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)ANSI C37.44 (1981; R 1992) Special for Distribution Oil Cutouts and Fuze LinksNEMA

44、ICS 4 (2005) Terminal BlocksNEMA ICS 6 (1993; R 2001; R 2006) Standard for EnclosuresNEMA RN 1 (2005) Standard for Polyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal ConduitNEMA TC 2 (2003) Standard for Electrical Polyvinyl Chloride (PVC) ConduitNEMA TC

45、3 (2004) Standard for Polyvinyl Chloride (PVC) Fittings for Use With Rigid PVC Conduit and TubingNEMA TC 6 Rev 1 1994) Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical EnergyNEMA WC 7 (1988; Rev 3 1996) Cross-Linked-Thermosetting-Polyethylene-Insulated Wire and Cable for the Transmission and Distribution of Electrical EnergyNEMA WC 8 (1988; Rev 3 1996) Ethylene-Propylene-Rubber-Insulated Wire and Cable for the Transmission and Distribution of Electrical EnergyNATIONAL FIRE PROTECTION ASSOCIATION (NFPA)NFPA 70 (2008; AMD 1 20