NAVY VV-P-236 A-1977 PETROLATUM TECHNICAL《软石腊工艺》.pdf

1、VV-P-23bA OOOb4q7 O VV-P-236A December 29. 1977 SUPERSEDING- Fed. Spec. VV-P-236 December 17, 1954 FEDERAL SPECIFICATION PETROLATUM, TECHNICAL This specification was approved. by the Commissioner, Federal Supply Service, General Services Administration, for the use of al 1 Federal agencies. 1. SCOPE

2、 1.1 Scope. This specification covers one grade of petrolatum for use as a light lubricating grease. 2. APPLICABLE DOCUMENTS 2.1 Government publications. The issues of the following docu- ments, in effect on date of invitation for bids or solicitation.for offers, form a part of this specification to

3、 the extent specified herei n. Federal Standards : Federal Test Method Std. 791 -Lubricant, Liquid Fuel, and Re1 ated Products , Methods of Testing. (Activities outside the Federal Government may obtain copies of Federal Specifications, Standards, and Handbooks as outlined under General Information

4、in the Index of Federal Specifications and Standards and at the prices indicated in the Index. The Index, which includes cumulative monthly supplements as issued, is for sale on a subscrip- tion basis by the Superintendent of Documents, U.S. Govern- ment Printing Office, Washington, DC 20402. (Singl

5、e copies of this specification and other Federal Specifications required by activities outside the Federal Government for bidding purposes are available without charge from Business Service Centers at the General Services Admin- istration Regional Offices in Boston, New York, Philadelphia, Washingto

6、n, DC, Atlanta, Chicago, Kansas City, MO, Fort Worth, Houston, Denver, San Francisco, Los Angeles and Seattle, WA. (Federal-Government activities may obtain copies of Federal Specifications, Standards, and Handbooks and the Index of Federal Specifications and Standards from established distribution

7、points-in their- agencies .-) FSC 9150 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VV-P-236A Mil i tary Standards: MIL-STD-105 -Sampling Procedures and Tables for Inspection by Attributes. MIL-STD-290 -Packaging, Packing, and Marking of Petroleum

8、 and Re1 ated Products. (Copies of Mi 1 i tary Specif i cations and Standards required by con- tractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer. ) this specification to the extent specified herein. Unl

9、ess otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shall apply. 2.2 Other publications, The following documents form a part of American Society for Testing and Materials (ASTM) Standards: D 88 D 91 D 92 D 127 D 482 D 937 D 974 D 1500 -Saybol t Viscosi

10、ty, Test for. -Precipitation Number of Lubricating Oils, Test for, -Flash and Fire Points by Cleveland Open Cup, Test -Drop Melting Point of Petroleum Wax, Including -Ash from Petroleum Products , Test for. -Cone Penetration of Petrolatum, Test for. -Neutral i zati on Number by Col or-I ndi cator Ti

11、tration, -ASTM Color of Petroleum Products (ASTM Color Scale), for. Petrolatum, Test for. Test for. Test for. (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania- 19103. ) 3, REQUIREMENTS 3.1 Materials. The compo

12、sition of the petrolatum is not limited. 3.2 Chemical and physical requirements. The petrolatum shall conform to the requjrements specified in table I. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VV-P-236A TABLE I, Chemical and Physical Require

13、ments. Requirements Color, STM color number Melting point, “C (“F) Viscosity, Saybol t, at Flash point, open cup. Penetration, unworked Corrosion on copper Ash content, percent by Neutral i zati on number, max. Precipitation number, max. Abras ive materi al Evaporation loss, percent, 1 OOOC (21 2“F)

14、, seconds “C (“F), min. weight, max. max. Limits NO. 2 - NO. 8 46.1C115) -60(140) 70- 95 199 (390) 150-275 Pass 1/ o. 1- 0.10 0.10 none 2 Test Paragraph 4.5.1 4.5.1 4.5.1 4.5.1 4.5.1 4.5.1 4.5.1 4.5.1 4.5.1 4.5.2 4.5.3 - 1/ After 24 hours, the petrolatum that is in contact with the copper strip shal

15、l show no green color, nor shall the petrolatum cause a black or green discoloration of the copper strip. 3.3 Workmanship. The petrolatum shall be manufactured by such processes as to produce a smooth, homogeneous and uniform product suit- able for the purpose intended. 4. QUALITY ASSURANCE PROVISIO

16、NS 4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the contractor may use his own or any othe

17、r facil.ities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. 4.2 -Classification of inspections. The inspection and testing of petrolatum shall be classi.fied as follows: a. Quality conformance inspection (4.3). 3 Provided by IHSNo

18、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-VV-P-23bA 91 749777q 000b950 O VV-P-236A 4.3 Sampl i ng . 4.3.1 Qual i ty conformance inspection samples. The qual i ty confor- mance inspection samples shall consist of a sample for tests (4.3.1.2) and samples for exam

19、ination of filled containers (4.3.1.3). Samples . shall be labled completely with information identifying the purpose of the sample, name of product, manufacturers name, specification number, lot and batch number date of sampling, and contract number 4.3.1.1 Lot and batch All petrolatum manufactured

20、 as one batch shall be considered a lot and shall be numbered as such for purposes of inspection. A batch is defined as the end product of all the raw mate- rials mixed or blended in a single operation (not exceeding 24 hours) through the same processing equipment with no change in the ingredient ma

21、terials 4.3.1.2 Sample for tests. Two random containers shall be taken from each lot. A 1-pound sample shall be taken from each container and placed in separate clean, dry, metal or glass containers which shall then be sealed. Each sample shall be subjected to all the quality conformance tests (4.5.

22、1 through 4.5.31, If either sample fails any of the quality conformance inspection tests, the inspection lot shall be rejected. 4.3.1.3 Sample for examination of filled containers. A random sample of filled containers shall be selected from each lot in accor- danke with MIL-STD-105 at inspection lev

23、el 1 and acceptable quality level (AQL) equal to 2.5 percent defective. 4.4 lual i ty conformance inspection tests, The qual i ty conformance inspectionsamples (4.3.1.2) for con- formance to the requirements of this specification, and on examination of sample containers (4.3.1.3) for conformance to

24、the packaging, pack- ing , and marklng requirements. 4.4.1 Test conditions. Test conditions shall be in accordance with 4.5 and chemical and physical values specified in section 3 apply to the average determinations made on the sample. 4.5 Methods of exami nation and test. 4.5.1 The petrolatum shall

25、 be tested in accordance with table II and 4.5.2 through 4.5.3 to determine conformance with 3.2 and examined in accordance with 4.5.4 to determine conformance with 5.1 . 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VV-P-23bA 71 7777774 000b45L

26、2 W VV-P-236A TABLE II. Test Methods. Test ASTM Test Fed. Test Method Std. kthod NO. No. 791 , Method No. ._. . Color, ASTM color number Mel ti ng poi nt Viscosity, Saybol t Flash point Penetration , unworked Corrosion on copper Ash content Neutralization number Precipitation number I 5309 I I D 150

27、0 D 127 D 88 D 92 D 937 D 482 D 974 D 91 - l/ - 1/ Melt a sample of the petrolatum in a small beaker, stir vigorously, and measure 10 milliliters of the melted sample into a graduated centrifuge tube. Add 70 to 80 milliliters of precipitation naphtha conforming to ASTM D91. Immerse the tube in a wat

28、er bath at a temperature of 65“ - + 3C (1500 + 5“ F) and allow to remain with occasional shaking, until the petrolatm grease is in solution. Add precipitation naphtha to make 100 milliliters. Invert at least 20 times and proceed in accordance with ASTM method D91. 4.5.2 Abrasive material. The precip

29、itate obtained from the pre- cipitation number test (4.5.1) shall be rubbed between two smooth pieces of plate glass. The presence of abrasive materials as evidenced by a gritty feel or scratches in the glass, shall be cause for rejection of the lot represented. 4.5.3 Evaporation loss. Place five gr

30、ams of the petrolatum to be tested in a flat-bottomed brass cup of known weight and having the following dimensions: outside diameter, 1-31/32 inches; inside dia- meter, 1-29/32 inches; outside height, 1-3/16 inches; thickness of metal, 1/32 to 1/16 inch. Heat in a constant-temperature of 105“ -110C

31、 (221 O -230F) for 1 hour. Remove cup, cool to a room temperature of 25“ - t 3C (77“ t 5OF) in a dessicator, and weigh. The loss in weight shall be reported-in percent as the evaporation loss. 4.5.4 Examination of filled containers. Each sample of filled container selected in accordance with 4.3.1.3

32、 shall be examined for defects of the container and closure, for evidence of leakage and unsat- isfactory markings. Each sample container shall also be weighed to determine the amount of contents. If the number of defective containers exceeds the acceptance number of the sampl ing plan specified in

33、4.3.1.3 , the lot shall be rejected. Rejected lots may be resubmitted for reexam-. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VV-P-23bA 91 m 9999974 00061152 11 VV-P-236A ination provided the contractor has removed or repaired all nonconform- in

34、g contalners, 4,6 Rejection and retest. Petrolatum which has been rejected may be reworked or replaced to correct the defects , and resubmitted for acceptance. Before resubmitting, full particulars concerning previous rejection and the action taken to correct the defects found in the original lot or

35、 batch shall be furnished the Inspector. Material reject- ed after retest shall not be resubmitted without specific approval of the procuring agency, 5. PREPARATION FOR DELIVERY 5,l Packaging, packing, and marking. The petrolatum shall be packaged, packed, and marked in accordance with MIL-STD-290.

36、The t.vpe and size-of containers and the level of packaging and packing shal1“be as specified by the procuring activity (see 6.2). 5.2 Additional marking. In addition to the markings specified in MIL-STD-290, the following marking shall be included on the exterior shipping container: “STORE IN A COO

37、L PLACE“. 6, NOTES 6.1 Intended use. The petrolatum covered by this specification is intended for use as a light grade of lubricating grease. It is not recommended for use as a lubricant in heavily loaded or hot running bearings, It may be used as a constituent in certain types of rust preventative

38、compounds. It is not to be used as a remedy, medicine or lubricant for the human body. 6.2 Ordering data. Purchasers should select the preferred options permitted herein and include the fol lowing information in procurement documents: a, Title, number, and date of this specification. b, Type and siz

39、e of container (see 5.1). c. Level of packaging and packing required (see 5.1). d, Special markings (see 5.2). e. Quantity desired, 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VV-P-236A MILITARY CUSTODIANS: Army - MR Na6 - AS Air Force - 11 CIV

40、IL AGENCY COORDINATING ACTIVITY: GSA - FSS REVIEW ACTIVITIES: Army - AT, EA, AR, SC, MI Navy - OS, SH, SA DLA- - PS, GS USER ACTIVITIES: Army - GL, ME Navy - YD PREPARING ACTIVITY: Navy - AS (Project No. 91 50-0459) U.S. GOVERNMENT PRINTING OFFICE : 1978 - 361-?1?3Q Orders for this publication are t

41、o be placed with General Services Admini- stration, acting as an agent for the Superintendent of Documents. See Section 2 of this specification to obtain extra copies and other documents referenced herei n . Price 70 cents each. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-