NEMA C136 18-2006 For Roadway and Area Lighting Equipment High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps《道路和地区照明设备 水平或垂直发光高亮度放.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers Association$16,& (R2010)FRU5RDGZDDQG$UHD/LJKWLQJ(TXLSPHQW+LJK0DVW6LGH0RXQWHG/XPLQDLUHVIRU+RULRQWDORU9HUWLFDO%XUQLQJ+LJK,QWHQVLWLVFKDUJH/DPSVANSI C136.18-2006 (R2010) Revision of ANSI C136.18-1987 (R1999) American National Standard for Roadw

2、ay and Area Lighting Equipment High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps Approved January 11, 2006 Secretariat: National Electrical Manufacturers Association Reaffirmed November 29, 2010 An American National Standard implies a consensus of t

3、hose substantially concerned with its scope and provisions. An American National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether he has approved the standard

4、 or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review and users are cautioned to obtain the latest editions. The American National Standards Institute does not develop

5、 standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. CAUTION NOTICE: This American

6、National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of approval. Purchasers of American National Standards may receive

7、 current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752, Rosslyn, VA 22209 Copyright 2006 by National Electrical Manufacturers Association. All rights includin

8、g translation into other languages are reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic

9、retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America. DISCLAIMER: The standards or guidelines presented in a NEMA standards publication are considered technically sound at the time they are approved for publication. They are no

10、t a substitute for a product sellers or users own judgment with respect to the particular product referenced in the standard or guideline, and NEMA does not undertake to guarantee the performance of any individual manufacturers products by virtue of this standard or guide. Thus, NEMA expressly discl

11、aims any responsibility for damages arising from the use, application, or reliance by others on the information contained in these standards or guidelines. ANSI C136.18-2006 (R2010) Revision of ANSI C136.18-1987 (R1999) CONTENTS 1 Scope 2 2 Normative references2 3 Informative references 3 4 Definiti

12、on of high-mast luminaire. 3 5 General . 3 6 Mounting provisions 3 7 Terminal blocks. 4 8 Wiring 4 9 Latching and hinging. 4 10 Refractor or lens replacement. 4 11 Optical assembly. 4 12 Voltage classification. 4 13 Ballast 5 14 Ignitor 5 15 Barriers 5 16 Photocontrol receptacle 5 17 Material and pr

13、otective coatings . 5 18 Labeling. 5 19 Grounding . 5 1 Scope This standard is intended to cover physical, operational, maintenance, and light-distribution features that permit use of high-mast luminaires in roadway applications when specified. It is not intended that compliance with this standard w

14、ill permit interchangeability with existing roadway equipment without thorough engineering review and evaluation. 2 Normative references This standard incorporates, by undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, a

15、nd the publications are listed below. For undated references, the latest edition of the publication referred to applies (including amendments). ANSI C78.40-1992 (R2003), American National Standard Specifications for Mercury Lamps. ANSI C78.42-2009, American National Standard for High Pressure Sodium

16、 Lamps. ANSI C82.4-2002, American National Standard for BallastsFor High-intensity Discharge and Low Sodium Lamps (Multiple-Supply Type). ANSI C136.2-2004, American National Standard for Roadway and Area Lighting EquipmentLuminaire Voltage Classification. ANSI C136.3-2005, American National Standard

17、 for Roadway Lighting EquipmentLuminaire Attachments. ANSI C136.10-2006, American National Standard to Roadway Lighting EquipmentLocking-type Photocontrol Devices and Mating ReceptaclesPhysical and Electrical Interchangeability and Testing. ANSI C136.13-2004, American National Standard for Roadway a

18、nd Area Lighting EquipmentMetal Brackets for Wood Poles. ANSI/IESNA RP8-2000, Roadway Lighting. 2ANSI C136.18-2006 (R2010) Revision of ANSI C136.18-1987 (R1999) 3 Informative references This standard is intended to be used in conjunction with the following publications. The latest edition of the pub

19、lication applies (including amendments). ANSI C136.11-1995, American National Standard for Roadway Lighting EquipmentMultiple Sockets. ANSI C136.12-2004, American National Standard for Roadway and Area Lighting EquipmentMercury LampsGuide for Selection. ANSI C136.15-2004, American National Standard

20、for Roadway and Area Lighting EquipmentHigh-intensity Discharge and Low-pressure Sodium Lamps in LuminairesField Identification. ANSI C136.19-2004, American National Standard for Roadway and Area Lighting EquipmentHigh-pressure Sodium LampsGuide for Selection. ANSI C136.22-2004, American National St

21、andard for Roadway and Area Lighting EquipmentInternal Labeling of Luminaires. NOTEANSI Standards are available from Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776. Phone: 303/397-7956, Fax: 303/397-2740, E-mail: or . 4 Definition of high-mast luminaire For the purpos

22、e of this standard, high-mast luminaires shall be considered to be those luminaires that are mounted at heights of 60 ft or more above the light standard base. The physical shape of the high-mast luminaire may vary in accordance with design considerations and architectural aesthetics, and the lumina

23、ires shape may be ovate, conical, or any of the rectilinear-style side-mounted designs. The high-mast luminaires would include variations, such as the open-bottom, glass refractor-type unit or enclosed luminaires. 5 General Where specified, high-mast luminaires of similar effective projected area an

24、d weight that, based on appropriate engineering review and evaluation, meet the requirements of this standard may be used in roadway applications with the assurance that: a) They shall fit the standard high-mast mounting arm. b) Light distribution patterns and photometric data available from manufac

25、turers shall be consistent with standard roadway luminaires, as specified in the appendix of ANSI/IESNA RP8 or subsequent ANSI standards. c) Physical, operational, and maintenance characteristics shall be similar to standard roadway luminaires. d) Lamp orientation may be either vertical or horizonta

26、l burning. 6 Mounting provisions Luminaires meeting the requirements of this standard shall: a) Accept a straight tubular section of 2 in. National Pipe Standard (NPS) pipe tenon not more than 10 in. long in accordance with Table 2 of ANSI C136.3 and Clause 7 of ANSI C136.13. b) Provide a shoulder o

27、r stop to limit the depth of insertion of the pipe tenon during installation. c) Permit leveling through no less than 3 from the axis of the attachment. 3ANSI C136.18-2006 (R2010) Revision of ANSI C136.18-1987 (R1999) d) Prevent entrance of wildlife by limiting openings around the pipe tenon mountin

28、g area to 1/4 in. over the range of tenon sizes and leveling adjustment. This may be accomplished by the use of supplemental closures. 7 Terminal blocks A terminal block with a minimum of two line-side pressure-type wire connectors having slotted-head screws shall be securely mounted in the luminair

29、e so that incoming conductors will clear all internal accessories. Each connector shall accept one copper or aluminum conductor, either solid or stranded, from number 8 to number 14 American Wire Gage. 8 Wiring All internal components shall be assembled and prewired so that the luminaire can be ener

30、gized by line connection at the terminal block. Multiwattage or multivoltage luminaires shall be wired in accordance with customer specifications. 9 Latching and hinging The enclosed type of luminaire shall be equipped with a latch(es) to secure the refractor door or lens and to permit access to the

31、 lamp compartment. The latch(es) shall be operable when wearing protective gloves, without using tools. The hinge shall be designed so that the access door or lens will not accidentally disengage or cause the refractor to break when it is unlatched without restraint. 10 Refractor or lens replacement

32、 The refractor or lens shall be secured by one or more movable supports so that it remains securely in place with the access door or lens open and may be removed from the door while it is open. The refractor or lens shall be removable without using tools or with a blade-type screwdriver. 11 Optical

33、assembly 11.1 Enclosed units The optical assembly in enclosed units shall be effectively sealed by conforming gaskets to minimize the entrance of atmospheric contaminates. While the luminaire is being opened, the gasket shall remain securely attached to the intended surface. The design of the reflec

34、tor shall permit operation of the lamp in accordance with ANSI C78.40 and the ANSI C78.42 Standards. Reflectors that produce non-symmetrical lighting distributions shall be capable of 360 distribution orientation without removal of the luminaire from the mounting arm. When the luminaire is in operat

35、ion, the reflector shall remain securely in its set orientation. 11.2 Open units The luminaire shall be designed to prevent rain, snow, sleet, or ice from contacting the lamp. Luminaires with refractors that produce non-symmetrical lighting distributions shall be capable of 360 distribution orientat

36、ion without removal of the luminaire from the mounting arm. When the luminaire is in operation, the reflector and refractor shall remain securely in their set orientation. 12 Voltage classification The luminaires shall be of the 600-volt classifications as defined in ANSI C136.2. 4ANSI C136.18-2006

37、(R2010) Revision of ANSI C136.18-1987 (R1999) 13 Ballast The luminaires shall be equipped with a ballast to operate a high-intensity discharge lamp, as specified on the nameplate described in the applicable ANSI standards for that lamp. It shall also provide a minimum transient impulse level of 10 k

38、V for the 600-volt classification when tested in accordance with the method described in Clause 7.2 of ANSI C82.4. 14 Ignitor An ignitor utilized as a component part of a ballast shall be capable of withstanding the temperature and voltage to which it is subjected during normal operation of the ball

39、ast. 15 Barriers Barriers (heat or other), if employed, shall be designed for the life of the luminaire. 16 Photocontrol receptacle Although not recommended, when an individual locking-type receptacle is incorporated into the luminaire, the receptacle shall meet the applicable provisions of ANSI C13

40、6.10. 17 Material and protective coatings Materials and protective coating used for the luminaire shall individually, and as a system, be resistant to atmospheric conditions, including the corrosive and erosive action of conditions of service encountered in industrial and seaboard areas. All wiring

41、and electrical components shall not exceed their temperature design limits when the luminaire is operated in draft-free air at a minimum ambient temperature of 25C, or as otherwise specified. 18 Labeling Luminaires shall be provided with one or more permanently affixed, readily visible, durable name

42、plates or labels that provide the following information: a) Manufacturers name and catalog number b) Input voltage and maximum input current c) Ballast type d) Photocontrol voltage, if applicable e) Lamp type, wattage, and voltage, if applicable f) Descriptive wiring diagram of luminaire g) Date of

43、manufacture 19 Grounding A method for grounding the non-current-carrying metal parts of the luminaire shall be provided. 5NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB